Installing On 500GB Partition On 2TB HDD?
Aug 14, 2012
I have a Hitachi 2TB Hard drive with about 1.2 TB worth of data (it was my data drive for my SSD). I've recently had to temporarily move motherboards (from a Z77 Motherboard to a Dell Foxconn from 2007). However, I can't use my SSD on the Foxconn (G33M) so I made a 500GB partition to use for WIn7 until I get my mobo back. However, I can't install because Windows keeps saying I can't install on a GPT partition. Before I would just change the mboo into EFI/UEFI mode to fix it, but my 2007 board doesn't support it.
View 3 Replies
ADVERTISEMENT
Sep 28, 2010
Im trying to partition the drive but I cant make the C drive less than 500gb. I followed this guide How to Resize Disk Partition in Windows 7. How do i make it smaller. I wanted to make C for Windows 7 and extra, but not half the hard drive.
View 1 Replies
View Related
Jun 20, 2012
How to partition hard disk 500gb
View 2 Replies
View Related
May 12, 2011
I have a 500 GB Western Digital Hard Drive, I can't access one of its partitions, it says access denied, and I have the ownership and all security stuff is marked for my account and system. Still can't access it, while I can when I boot from my other hard drive which have windows XP.
View 3 Replies
View Related
Nov 15, 2011
I bought a laptop recently and when it arrived i turned it and on the install started but i didn't have the time to go through this properly as i had to go out and when it got to the part about creating partitions i switched it off. I thought when i turned it on again i'd be able to setup the partitions but this was done and now there are two partitions on the laptop: C 49.9 GB and D 624 GB. The C drive has the OS on it and the program files but i think this is a bit small and only has 9.33 GB free, i'm wondering if i re-install windows using the CD does this let me create the partitions again and if so what size should i make them?
View 2 Replies
View Related
Jun 24, 2009
I currently use Ubuntu 9.04 as my primary OS, but having used Vista x64, Windows 7 x64 beta and having a copy of the RC i want to install it...
...but i don't want to frakk up my existing partitions etc.
Will Windows happily see and install to a 40GB partition i have on the drive, or will it demand to wipe it all or refuse to install. I always encountered this problem when installing Vista which resulted in having to chop up and delete partitions.
I'm aware my GRUB will get fryed, but that's a command or two away from being re-installed so no worries there.
View 2 Replies
View Related
Oct 24, 2012
I have windows 7 os, Iwould like to install xp because i am not happy about win 7 will not let me install some programs that i use, but i would like to leave 7 as is.
View 2 Replies
View Related
Apr 30, 2012
My first post and quick question please to the experienced community here. I have Windows 7 64 bit Home Preminum installed and did a �standard� clean installation on the computer I just built. This was a novice mistake of course. First time Windows 7 user and I was uninitiated about the �System Reserved Partition� that joyfully comes with each installation unless steps are performed during/prior the installation to consolidate the installation into one partition...which is my preference. I found the following excellent tutorial on how to perform a clean installation of Windows 7 that also addresses how to install with a single partition: [URL] Just below is an explanation of how to install Win 7 with one partition: If you do not want to have the 100 MB System Reserved partition and only the Windows 7 C: partition on a HDD after installation, then select a formatted partition or drive to install Windows 7 on. If there are any partitions on the disk, you won't get the 100 MB System Reserved.
So my simple questions are after performing the following: Install fresh unformatted hard drive. Perform full format of hard drive with a single partition. Do I? a. Make sure Disk Management has assigned a letter to this single partition? b. Do I mark this partition as active ? should I also perform steps a & b prior to installing Windows 7?
View 9 Replies
View Related
Sep 16, 2009
I have Windows 7 64 bit installed on my computer but needed to install a program only compatible with 32 bit, so decided to create a new 3GB partition using the in-built feature in Windows 7 and install Windows XP on it.
I booted up XP, formatted the partition again,a nd let it run through the set up, but as soon as it had copied the files and rebooted, I got the error message 'error loading operating system'.
I really don't know how to fix this - I'm not bothered about installing XP, I can do without it, but the main thing is getting back onto Windows 7 as I have all my files there. I didn't bother making a back up as I thought any problems that could occur would be limited to the partition that I installed Win XP on.
I tried the 'start up repair' utility on the Windows 7 boot disk, and although that said it had repaired a problem, I still get the same error. Although one strange thing I've noticed is that it says that Windows 7 is located on '(E: ) Local Disk' when it was definitely installed on the D: drive - E: was the new partition of size 3GB with Win XP installed, but according to this it is 400GB + with Windows 7.
View 9 Replies
View Related
Nov 4, 2009
I have one more Win 7 license to install from my retail "Family Pack."
I have created an 80GB partition on drive 0, which contains the drive C partition and Windows XP. Will this upgrade license allow me to install Windows 7 in the new partition and keep XP in the other?
In short, a duel boot choice on booting the system?
View 1 Replies
View Related
Nov 11, 2009
When installing programs onto your new system, do you guys install them on the same partition that you have Windows 7 on, or do you put them on another partition?
My current setup is 1 HDD with 2 partitions. I have windows 7 installed on a 40gb partition, and the 2nd partition is all the remaining space on my HDD.
Right now, as I've started installing my programs, I'm putting my programs onto the 2nd partition. I figure the system may run a little smoother if the OS is located in one place with nothing else, and all my programs, docs, pics, music, etc... are in a different place.
Does this make sense?
View 1 Replies
View Related
Dec 17, 2011
I am looking to upgrade my current 4GB of ram to 8GB. For this I understand that I need the 64 bit version of Windows XP. I have a hard drive with 3 partitions and I was wondering whether it was possible to back up all of my stuff on another partition rather than using an external hard drive. Does installing a new OS only format one partition?
View 1 Replies
View Related
Jun 11, 2012
I want to install Windows7 on my laptop. I would like to have several partitions, but when I started installation process I can see only one partition available and option "new" is not active. How can I create new partition. I have I have a hard drive 500Gb, but while installing OS it only shows about 465 Gb. Also the question about drivers. when can I install them? after installing OS or before that as I see an option "drivers" just at the beginning of installation.
View 6 Replies
View Related
Sep 17, 2011
I've got my 500gb laptop hdd partitioned with majority on d data partition (have not installed anything ever to d - only c). I do have my user folders relocated to the d part. Where should I install or set up game directory for my d partition? (Current game I'm installing is recommending c/prog files(x86)/published/game title) should I just change c: to d: even though those folders don't exist, installation will create them? Are steam games installed to different path normally than x/program files. How might future steam game installs affect where/what directory folders? Any program for remapping or whatever would be needed to use an xbox 360 controller for pc games?
View 4 Replies
View Related
Nov 19, 2009
I would like to create a Bootable Recovery Partition On my laptop, just like the one that came from the manufacturer, except since I am migrating to Windows 7 I need to have that recovery partition be Windows 7 as well. The laptop came with Vista Home Basic Edition.
Does anyone know how to do this?
View 1 Replies
View Related
Nov 25, 2009
I made a mistake when installing Windows 7 on a 150GB hard drive which previously had three partitions.I formatted all three and chose to install the OS to a 75 gb partition.
Everything installed ok but I am 75 GB down on hard disc space.
Is there any simple ways to amalgamate the other 75GB partition to give me back my original size of 150GB?
View 9 Replies
View Related
Nov 27, 2009
currently i have vista 32 b with 2 partitions one for system and one for data
if i want to do a fresh install to 64 b Windows 7 and keep the data on
my data partition, can it be done ? or must backup my data on external
source and format both partitions?
View 5 Replies
View Related
Dec 1, 2009
Presently I'm running a dual boot with Vista x64 and Windows 7 x64 on two partitions. Both OSs have programmes and games installed with them on their respective partitions.
Today I'm receiving a new Samsung F3 1TB HDD.
I've read that it is advantageous to install the OS on a small partition and put the programmes, games etc on a seperate partition.
This supposedly has various advantages- speed, security etc.
Can anybody clarify this for me as I'm thinking of making my new drive my c:/ drive and putting Windows 7 on that (dropping Vista altogether) as it will be faster than my current main drive.
Would it be a good idea to put Windows 7 on a small partition and everything else on the main body of the drive?
If so how do I go about it. I can install and partition but how do I install programmes and games on a separate partition and access them?
I know this is a dumb question but I've never done it this way before.
View 7 Replies
View Related
Mar 4, 2012
So i wanted to do a fresh W7 install on a new partition today. My setup uses two 500gb drives in raid0 with Windows 7 64bit installed. Using the windows 7 disk management tool i resized the main partition to give space to the new partition. I didn't reformat thinking i could do it before installation.So I used the microsoft tool to create a bootable usb drive. restarted, went into boot menu and set it to boot from usb first and booted into windows 7 installation from the usb drive.The computer was set up in raid0 when i got it and i did a fresh install of W7 and that time i remember it picked up the raid drivers and used those. this time however it didn't pickup any drives. I went to install and did custom install but there was no drives to choose from and after a scan it didn't find any either. i went back and booted into my main OS and used the disk management tool to format the unallocated partition. formatted as NTFS and set it to drive D. booted up from the USB drive again and there was still no drives in the list that i could install too.
View 1 Replies
View Related
May 29, 2010
Drive is not accessible in windows 7. I installed W7 on Drive C and Drive D is visible but not accessible. Both C and D are partitions on the same HD. I had Windows XP on drive C before and formatted it and installed W7 on it. I have a lot of material saved on Drive D and cannot afford to lose them. What can I do to let windows 7 access drive D?
View 2 Replies
View Related
May 10, 2011
I want to install win 7 professional x64,i have a Dvd iso...Problem i want to solve is next,i have 1 sata disk ,and 1 ide disk...I want to divide Sata on two partition,c and d,and to install system on c..Next,my Ide disk ,has jumper on cable select,i think it could be the only way that is to pc work properly.Problem is ,when i install win 7 on partition c,next happens ,on My Computer,disk drives are not shown as Sataartitions c: and d: but its mixed somewhat,if i recall,itc c: of sata,and d is given t ide disk... i really want to know is there a solution to have primary sata c: and d: ,and than ide diskProcessorModel : AMD Athlon(tm) 64 X2 Dual Core Processor 4600+Speed : 2.57GHzCores per Processor : 2 Unit(s)Threads per Core : 1 Unit(s)Type : Dual-CoreIntegrated Data Cache : 2x 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line sizeL2 Cache : 2x 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size[CODE]
View 2 Replies
View Related
Aug 9, 2009
i used win 7 and wanted to install xp as a multi-boot on my laptop for trying an xp based encyclopedia but when i installed xp i got error "ERROR LOADING OPERATING SYSTEM" so i reinstalled xp and realized that i cant see my 2 25 gb partitions full of data,so kindly guide me to get my partitions back i have currently reinstall win 7.
View 2 Replies
View Related
Aug 10, 2012
I have a WD 500GB HDD plugged into my PC via USB, the drive was brand new and had a 90GB partition and a 410GB partition on it, I formatted the larger partition with Partition Wizard and now in disk management the drive only shows as 90GB, there is no unallocated space where the partition was before. I've run 5 different partition recovery tools (Partition Wizard, Acronis True Image WD, Easus Partition Recovery, Partition Table doctor, Active Partition Recovery) but none of them can see anything more than 90GB, what's happened to the rest of it and how can I recover it?
View 9 Replies
View Related
Jul 15, 2012
I recently bought an HP Elite Book and I decided to pick up an OCZ Vertex 3 for the computer (120GB SSD). I normally use Norton Ghost for a lot of things I do so I decided to use Ghost to Image the OEM HDD that came with the laptop too the SSD. I went in used the command prompt screen to use the switch -ntexact so it would work, did Disk -> Disk image and ran the process. Now when the unit boots with the SSD in it, it's getting hung up on the starting Windows 7 Screen.
View 3 Replies
View Related
Dec 1, 2009
I have Windows 7 64 bits in a DELL Laptop Latitude E4300 working fine (more or less). I just plugged into it a USB HD from iomega with 500 GB capacity. I can see this disk without problems in all my XP (32 bits) based systems. But not on Windows 7. When I try to open it I get the error message:
Cannot access F:
The archive is damaged or inaccessible
I know the disk is fine. I have in this very same computer vmware installed with Ubuntu 64 bits where I can mount the HD and see it without problem (?) but not in the host Windows 7 system. I saw a driver installation message the first time I plugged into the laptop on Windows 7 but clearly, this was incorrect.
Should I uninstall the driver and get it from somewhere else other than the default place (which did not seem to work well)?
View 3 Replies
View Related
May 25, 2011
So the other day I decided that I wanted to try dual-booting Ubuntu 10.04 on my HP Pavilion dv7-4083cl Entertainment Notebook that already had Windows 7 Home Premium 64bit installed. I shrank the main (biggest) partition by 100Gigs and then installed Ubuntu 10.04 on that 100Gigs of unallocated space. All worked fine, except when I tried to boot Windows 7 from the grub menu, it would come up to the beginning Windows 7 animation and then it would crash. So, I downloaded a Windows 7 Recovery CD and tried a few of the tools there. I did not create a system recover image prior to my troubles, so I could not recover the easy way.
After that, I tried the Startup Repair tool, which did not work. I read somewhere to try that Startup Repair tool 2 or 3 times, which I did. The third time, it seemed to freeze; it was "working" for about 6 hours, at which point I decided that it was enough and shut down the PC. That was a mistake... From that point forward, I still could not boot into Windows, but also every time I tried to boot into Ubuntu, I had to perform a disk check, which always failed! After trying that a few times, I had had enough yet again and decided to just reinstall Ubuntu. The install seemed to work fine, but once I rebooted I could not boot into Ubuntu (or Windows 7). No matter what option I select from the grub menu (or if I push F11 to go into recovery partition), it gives me an error that says "Error: No such partition" and dumps me into a grub rescue prompt...
After releasing multiple bouts of turrets, I tried booting from my Ubuntu LiveUSB again (same one I installed Ubuntu with twice) and ran Gparted to look at my partitions. It only showed me the one 100Gig partition and said the remaining ~350Gigs were unallocated! So now I'm stuck with no bootable operating system (on my HD), and to top it off, HP just sent me their "official" recovery disks that are trying to reformat my HD and erase all my data...
I know there has to be a way to restore my partitions and replace the grub bootloader with the Windows 7 bootloader. At this point I don't care about Ubuntu at all. All of my data was on the Windows 7 partition (which I cannot access from Ubuntu to grab it).
I can provide any information that you need, but remember that I can only do so via either BIOS or by booting Ubuntu from the LiveUSB. I cannot access Windows 7. I also do not have a Windows 7 install disk as this was a refurbished HP laptop that I bought from Costco...
View 9 Replies
View Related
Dec 29, 2011
I have an Asus 1215n netbook. It came with Windows 7 Home Premium installed. The drive came with the following partitions:
100 GB Windows 7
15 GB Asus Expressgate (a quick-boot minimal OS)
118 GB Empty partition
15 MB (unknown)
I had been using TrueCrypt to encrypt the 100 GB system partition, which required that I enter a password before booting into windows.Other than that I never touched it until now. Today I decided to upgrade to Windows 7 Ultimate, so after making sure everything I wanted to keep was on the 118 GB partition, I booted into the Windows 7 setup, formatted *only the 100 GB partition* from within the setup, and selected it as the volume to which to install.Upon restarting, the third partition wasn't shown in My Computer. I went to Administrative Tools -> Computer Management -> Storage -> Disk Management, which shows the following partitions:
100 GB Healthy
15 GB Healthy
118 GB Free space
20 MB Healthy
I've done these exact steps in the past with similar configurations, and have never had this happen to me before. I can only surmise that this is due to having had a TrueCrypt boot manager, but beyond that I am uncertain. how I might be able to recover this partition?
View 8 Replies
View Related
Apr 30, 2012
I'm about to install windows 7 64bit, onto a new system, with 3 hard drives. One for OS and Data. Second one (SSD) will only be used for caching - fast boot. Third one for -printer-pagefile etc. System is ASUS P8Z77-V deluxe, which has UEFI. Do I need MBR partitions or GPT Partitions.
View 1 Replies
View Related
Oct 15, 2012
I have a spare sata 500gb hdd.Thinking of getting a caddy to hold this drive so that I can make use of it,On the other hand I have seen desktop docking station for a hdd. Just want to know which one would be the best to get. A Caddy or the docking station?
View 9 Replies
View Related
Jan 15, 2013
I was playing Mass Effect earlier. Got off because of school, so i put it to sleep. When i returned home, I tried getting on steam. The path wasn't found, so I didn't think anything of it. Rebooted. Still no path, so i go to my slave HDD, and surprise! It wasn't there for some reason. I've looked for it in disk management; no where to be found. Ran seatools, no luck. I had around 300 GiGs on there.I also turned off the laptop, took out the battery, and both master and slave drives for an hour. NOTHING.
EDIT: when i check disk management, it seems there is a drive of some sort on there, but it has no name.. It's blank. Nothing but *Status* has any information: "Healthy (OEM partition)." When i try to right click, the menu only has a "Help" tab.
View 7 Replies
View Related
Jan 20, 2012
Almost all my files are in this hdd and it won't work anymore. just restatted my pc and suddenly it won't show up. it's my back up/storage hdd...
View 5 Replies
View Related
