Drive is not accessible in windows 7. I installed W7 on Drive C and Drive D is visible but not accessible. Both C and D are partitions on the same HD. I had Windows XP on drive C before and formatted it and installed W7 on it. I have a lot of material saved on Drive D and cannot afford to lose them. What can I do to let windows 7 access drive D?
View 2 Replies
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
My first post and quick question please to the experienced community here. I have Windows 7 64 bit Home Preminum installed and did a �standard� clean installation on the computer I just built. This was a novice mistake of course. First time Windows 7 user and I was uninitiated about the �System Reserved Partition� that joyfully comes with each installation unless steps are performed during/prior the installation to consolidate the installation into one partition...which is my preference. I found the following excellent tutorial on how to perform a clean installation of Windows 7 that also addresses how to install with a single partition: [URL] Just below is an explanation of how to install Win 7 with one partition: If you do not want to have the 100 MB System Reserved partition and only the Windows 7 C: partition on a HDD after installation, then select a formatted partition or drive to install Windows 7 on. If there are any partitions on the disk, you won't get the 100 MB System Reserved.
So my simple questions are after performing the following: Install fresh unformatted hard drive. Perform full format of hard drive with a single partition. Do I? a. Make sure Disk Management has assigned a letter to this single partition? b. Do I mark this partition as active ? should I also perform steps a & b prior to installing Windows 7?
I have one more Win 7 license to install from my retail "Family Pack."
I have created an 80GB partition on drive 0, which contains the drive C partition and Windows XP. Will this upgrade license allow me to install Windows 7 in the new partition and keep XP in the other?
In short, a duel boot choice on booting the system?
I want to install Windows7 on my laptop. I would like to have several partitions, but when I started installation process I can see only one partition available and option "new" is not active. How can I create new partition. I have I have a hard drive 500Gb, but while installing OS it only shows about 465 Gb. Also the question about drivers. when can I install them? after installing OS or before that as I see an option "drivers" just at the beginning of installation.
View 6 Replies View RelatedSo i wanted to do a fresh W7 install on a new partition today. My setup uses two 500gb drives in raid0 with Windows 7 64bit installed. Using the windows 7 disk management tool i resized the main partition to give space to the new partition. I didn't reformat thinking i could do it before installation.So I used the microsoft tool to create a bootable usb drive. restarted, went into boot menu and set it to boot from usb first and booted into windows 7 installation from the usb drive.The computer was set up in raid0 when i got it and i did a fresh install of W7 and that time i remember it picked up the raid drivers and used those. this time however it didn't pickup any drives. I went to install and did custom install but there was no drives to choose from and after a scan it didn't find any either. i went back and booted into my main OS and used the disk management tool to format the unallocated partition. formatted as NTFS and set it to drive D. booted up from the USB drive again and there was still no drives in the list that i could install too.
View 1 Replies View RelatedI've got a laptop with a Windows partition and an Ubuntu partition. I'm pretty sure I just botched an Ubuntu upgrade.What I'd like to do is get my documents off of the Ubuntu partition. Is there a way to access that partition from windows (i.e. the window's partition)?
View 9 Replies View Relatedcant access second partition after reinstalling windows 7.
View 5 Replies View RelatedI want to install win 7 professional x64,i have a Dvd iso...Problem i want to solve is next,i have 1 sata disk ,and 1 ide disk...I want to divide Sata on two partition,c and d,and to install system on c..Next,my Ide disk ,has jumper on cable select,i think it could be the only way that is to pc work properly.Problem is ,when i install win 7 on partition c,next happens ,on My Computer,disk drives are not shown as Sataartitions c: and d: but its mixed somewhat,if i recall,itc c: of sata,and d is given t ide disk... i really want to know is there a solution to have primary sata c: and d: ,and than ide diskProcessorModel : AMD Athlon(tm) 64 X2 Dual Core Processor 4600+Speed : 2.57GHzCores per Processor : 2 Unit(s)Threads per Core : 1 Unit(s)Type : Dual-CoreIntegrated Data Cache : 2x 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line sizeL2 Cache : 2x 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size[CODE]
View 2 Replies View RelatedSo the other day I decided that I wanted to try dual-booting Ubuntu 10.04 on my HP Pavilion dv7-4083cl Entertainment Notebook that already had Windows 7 Home Premium 64bit installed. I shrank the main (biggest) partition by 100Gigs and then installed Ubuntu 10.04 on that 100Gigs of unallocated space. All worked fine, except when I tried to boot Windows 7 from the grub menu, it would come up to the beginning Windows 7 animation and then it would crash. So, I downloaded a Windows 7 Recovery CD and tried a few of the tools there. I did not create a system recover image prior to my troubles, so I could not recover the easy way.
After that, I tried the Startup Repair tool, which did not work. I read somewhere to try that Startup Repair tool 2 or 3 times, which I did. The third time, it seemed to freeze; it was "working" for about 6 hours, at which point I decided that it was enough and shut down the PC. That was a mistake... From that point forward, I still could not boot into Windows, but also every time I tried to boot into Ubuntu, I had to perform a disk check, which always failed! After trying that a few times, I had had enough yet again and decided to just reinstall Ubuntu. The install seemed to work fine, but once I rebooted I could not boot into Ubuntu (or Windows 7). No matter what option I select from the grub menu (or if I push F11 to go into recovery partition), it gives me an error that says "Error: No such partition" and dumps me into a grub rescue prompt...
After releasing multiple bouts of turrets, I tried booting from my Ubuntu LiveUSB again (same one I installed Ubuntu with twice) and ran Gparted to look at my partitions. It only showed me the one 100Gig partition and said the remaining ~350Gigs were unallocated! So now I'm stuck with no bootable operating system (on my HD), and to top it off, HP just sent me their "official" recovery disks that are trying to reformat my HD and erase all my data...
I know there has to be a way to restore my partitions and replace the grub bootloader with the Windows 7 bootloader. At this point I don't care about Ubuntu at all. All of my data was on the Windows 7 partition (which I cannot access from Ubuntu to grab it).
I can provide any information that you need, but remember that I can only do so via either BIOS or by booting Ubuntu from the LiveUSB. I cannot access Windows 7. I also do not have a Windows 7 install disk as this was a refurbished HP laptop that I bought from Costco...
I have an Asus 1215n netbook. It came with Windows 7 Home Premium installed. The drive came with the following partitions:
100 GB Windows 7
15 GB Asus Expressgate (a quick-boot minimal OS)
118 GB Empty partition
15 MB (unknown)
I had been using TrueCrypt to encrypt the 100 GB system partition, which required that I enter a password before booting into windows.Other than that I never touched it until now. Today I decided to upgrade to Windows 7 Ultimate, so after making sure everything I wanted to keep was on the 118 GB partition, I booted into the Windows 7 setup, formatted *only the 100 GB partition* from within the setup, and selected it as the volume to which to install.Upon restarting, the third partition wasn't shown in My Computer. I went to Administrative Tools -> Computer Management -> Storage -> Disk Management, which shows the following partitions:
100 GB Healthy
15 GB Healthy
118 GB Free space
20 MB Healthy
I've done these exact steps in the past with similar configurations, and have never had this happen to me before. I can only surmise that this is due to having had a TrueCrypt boot manager, but beyond that I am uncertain. how I might be able to recover this partition?
I'm about to install windows 7 64bit, onto a new system, with 3 hard drives. One for OS and Data. Second one (SSD) will only be used for caching - fast boot. Third one for -printer-pagefile etc. System is ASUS P8Z77-V deluxe, which has UEFI. Do I need MBR partitions or GPT Partitions.
View 1 Replies View Relatedi had windows 7 home premium and i had to formatt the HDD because was a problem with the windows installation, could not do recover because got into a eternal loop the system and had to use a version that friend of mine lean to me of windows 7 i do not erased the recover partition and i wish have access to this partition to get my windows version or try of install it from there again and have my own windows copy, how could i get access or unlock the recover partition and get the files and install windows from there.
View 1 Replies View RelatedI got a new HP laptop ame with window 7 home premium. I decided to have dual boot so install ubuntu 11.10. The bad thing is i didn't make a recovery disc and now windows 7 cant boot. It does show up in the grub menu but when i choose windows7 it give me an error that windows can't boot it might be because of hardware or software change.
View 2 Replies View RelatedMy computer has windows 7. I created a separate partition on my hard drive to install windows xp, but now when I try to install it I get an chkdsk /f error.
View 5 Replies View Relatedmy niece was telling me her dell was not working right so I decided to just do a clean factory restore as a scan with malware bytes revealed over 30 viruses/trojans! Someones gonna get a sit down to talk about her surfing habits but I digress. I figure at this point a clean restore is easier than trying to remove these viruses.
So I go to do the normal F8, repair my computer step and see that the repair my computer function doesn't work. Ok let me boot to windows 7 disk and select the repair option and use that for factory restore. Again nothing, usually Dell datasafe options will allow me to do this. I then notice that the recovery partition was not showing up.
I called her and asked and it seems my sisters so called boyfriends fancies himself a "computer expert" and last time they were having problems decided to just reinstall windows which I assume some how lost the connection to the recovery partition.
I installed EaseUS free partition manager and see that the Recovery partition is still there just not accessible. Is there a way I can make this partition bootable again so that i can assess it from the repair menu and possible repair this back to factory?
also if I go like im going to reinstall windows when it says in what partition you want to install windows I can also see the recovery partition.
Since re-installing Windows 7, I can't open the Users folder on my other data drive. The green bar goes almost to the end of the X, then freezes. I've tried leaving it for a couple hours and it's still in the same spot.I've tried disabling the thumbnails and indexing is disabled, still the same.
View 2 Replies View RelatedThe hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
View 4 Replies View RelatedI recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
View 6 Replies View RelatedI recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active". I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart". I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message.
I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc. I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "Factory Image" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
had a really bad crash with laptop,so decided to format and add my windows 7 disc to do so but now when i go to setup it is saying it does not recognaise my harddrive?
View 12 Replies View RelatedI bought a laptop recently and when it arrived i turned it and on the install started but i didn't have the time to go through this properly as i had to go out and when it got to the part about creating partitions i switched it off. I thought when i turned it on again i'd be able to setup the partitions but this was done and now there are two partitions on the laptop: C 49.9 GB and D 624 GB. The C drive has the OS on it and the program files but i think this is a bit small and only has 9.33 GB free, i'm wondering if i re-install windows using the CD does this let me create the partitions again and if so what size should i make them?
View 2 Replies View RelatedI currently use Ubuntu 9.04 as my primary OS, but having used Vista x64, Windows 7 x64 beta and having a copy of the RC i want to install it...
...but i don't want to frakk up my existing partitions etc.
Will Windows happily see and install to a 40GB partition i have on the drive, or will it demand to wipe it all or refuse to install. I always encountered this problem when installing Vista which resulted in having to chop up and delete partitions.
I'm aware my GRUB will get fryed, but that's a command or two away from being re-installed so no worries there.
I have windows 7 os, Iwould like to install xp because i am not happy about win 7 will not let me install some programs that i use, but i would like to leave 7 as is.
View 2 Replies View RelatedI have upgraded from Vista to 7. While I was using Vista I had a seperate partition that had all the software that originally came with my laptop.
Now I have installed Windows 7 I need to have access to these files so I can get the extra bits on my laptop to work. My problem is that I can't see the partition in Explorer anymore. I know it is still there because I can see it in Disk Management.
I have attached a screen shot of the disk management if that helps. (Its the partition that is 9.28gb)
I have Windows 7 64 bit installed on my computer but needed to install a program only compatible with 32 bit, so decided to create a new 3GB partition using the in-built feature in Windows 7 and install Windows XP on it.
I booted up XP, formatted the partition again,a nd let it run through the set up, but as soon as it had copied the files and rebooted, I got the error message 'error loading operating system'.
I really don't know how to fix this - I'm not bothered about installing XP, I can do without it, but the main thing is getting back onto Windows 7 as I have all my files there. I didn't bother making a back up as I thought any problems that could occur would be limited to the partition that I installed Win XP on.
I tried the 'start up repair' utility on the Windows 7 boot disk, and although that said it had repaired a problem, I still get the same error. Although one strange thing I've noticed is that it says that Windows 7 is located on '(E: ) Local Disk' when it was definitely installed on the D: drive - E: was the new partition of size 3GB with Win XP installed, but according to this it is 400GB + with Windows 7.
When installing programs onto your new system, do you guys install them on the same partition that you have Windows 7 on, or do you put them on another partition?
My current setup is 1 HDD with 2 partitions. I have windows 7 installed on a 40gb partition, and the 2nd partition is all the remaining space on my HDD.
Right now, as I've started installing my programs, I'm putting my programs onto the 2nd partition. I figure the system may run a little smoother if the OS is located in one place with nothing else, and all my programs, docs, pics, music, etc... are in a different place.
Does this make sense?
I am looking to upgrade my current 4GB of ram to 8GB. For this I understand that I need the 64 bit version of Windows XP. I have a hard drive with 3 partitions and I was wondering whether it was possible to back up all of my stuff on another partition rather than using an external hard drive. Does installing a new OS only format one partition?
View 1 Replies View RelatedI have a Hitachi 2TB Hard drive with about 1.2 TB worth of data (it was my data drive for my SSD). I've recently had to temporarily move motherboards (from a Z77 Motherboard to a Dell Foxconn from 2007). However, I can't use my SSD on the Foxconn (G33M) so I made a 500GB partition to use for WIn7 until I get my mobo back. However, I can't install because Windows keeps saying I can't install on a GPT partition. Before I would just change the mboo into EFI/UEFI mode to fix it, but my 2007 board doesn't support it.
View 3 Replies View Related
