No Access To Partition?
May 1, 2010
I have upgraded from Vista to 7. While I was using Vista I had a seperate partition that had all the software that originally came with my laptop.
Now I have installed Windows 7 I need to have access to these files so I can get the extra bits on my laptop to work. My problem is that I can't see the partition in Explorer anymore. I know it is still there because I can see it in Disk Management.
I have attached a screen shot of the disk management if that helps. (Its the partition that is 9.28gb)
View 3 Replies
ADVERTISEMENT
Aug 29, 2012
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
View 4 Replies
View Related
Jan 13, 2009
I had a go at installing Windows 7 yesterday and have run into a small hiccup.On my XP installation, my HD was partitioned into 2 drives, C: and D: (both the C and D drives are NTFS formatted).C: was used for windows and program files.D: was used for my documents eg. videos, photos etc.I installed Windows 7 as a fresh install to the C: partition and the installation went smoothly.However, My Computer, I can see the D: drive listed, but every time I click on the icon it says "Access Denied - Drive Not Accessible"All my stuff is backed up on an external drive so I'm not too worried about re-formatting HD etc, but wondered why it is doing it and if anyone knew a way to get my D: drive back without formatting?
View 9 Replies
View Related
Nov 14, 2012
how to get access to recovery window?
View 1 Replies
View Related
Jul 18, 2011
Got an HP Mini 110 netbook. A person who gave it to me destroyed all the OS system, plus the RAM's were broken. So I replaced them and installed a fresh copy of Windows 7 Starter 32bit. Everything works fine, but as most new laptops this one has a hidden recovery partition. The problem is I want to restore this machine to factory condition, but I cant access it due to the fact that I dont have HP Recovery Manager or something like that. The recovery partition itself is okay as I saw in Admin Tools. When going to System Recovery Options / System Image Recovery, the process cant detect any image - "Windows cant find a system image on this computer".
what could I use to restore it to factory condition? Maybe there is a software that I can install and use in the same way as HP Recovery Manager? Or maybe I can get HP Recovery Manager somewhere. so that you know, I also tried the F6 and itc methods, no luck.
View 7 Replies
View Related
Feb 13, 2012
I had Windows 7 Ultimate x64 installed.I caught a virus, could not get rid of it, kept getting forcefully logged off, and couldn't manage anything from safe mode, or do a sys. restore either.Quickly got irritated, and formatted C: drive and reinstalled.After installation I navigated to the D: partition, however, the explorer simply says that this folder is empty. under properties, the D: drive is still 37GB full and 231 GB empty, I do not have any other partitions.
View 3 Replies
View Related
Oct 30, 2012
I've got a laptop with a Windows partition and an Ubuntu partition. I'm pretty sure I just botched an Ubuntu upgrade.What I'd like to do is get my documents off of the Ubuntu partition. Is there a way to access that partition from windows (i.e. the window's partition)?
View 9 Replies
View Related
Sep 6, 2009
I installed windows 7, on the first boot I could access my D drive which is the drive that contains all media, files, resumes, etc etc etc. Windows 7 itself is on the C drive. I rebooted, and I open up 'computer' and now the D drive just says 'D: (Spare) NTFS' if I try to open or browse it says 'Access Denied' in a pop up window.
If I try to change the drive letter in disc management; 'Virtual Disk Manager: The parameter is incorrect'.
If I right click the drive and access security it says I don't have permission to view security and that I should try to take ownership. If I try to take ownership; 'access denied' Windows 7 literally stole all of my stuff. I suspect it's still in there but I cannot access it. The windows vista I installed on that drive as a work around incase I needed to grab drives and 7 couldn't get online, loads from that inaccessible drive, but cannot browse it. So i know it's intact and has the files on it.
Is there a way to brute force my way into it. it's my stuff and I want it.
I've been looking for how to fix this for around 16 hours now and have only found half tutorials and convoluted nonsense. how do i get access to my drive without formatting? I'm on the verge of turning into one of those people who just goes around spamming fbombs everywhere. I'm at my limit of sanity and patience with this. there was no reason for windows to lock it away from me in the first place.
View 1 Replies
View Related
Jan 25, 2011
cant access second partition after reinstalling windows 7.
View 5 Replies
View Related
May 29, 2010
Drive is not accessible in windows 7. I installed W7 on Drive C and Drive D is visible but not accessible. Both C and D are partitions on the same HD. I had Windows XP on drive C before and formatted it and installed W7 on it. I have a lot of material saved on Drive D and cannot afford to lose them. What can I do to let windows 7 access drive D?
View 2 Replies
View Related
Jan 23, 2012
i had windows 7 home premium and i had to formatt the HDD because was a problem with the windows installation, could not do recover because got into a eternal loop the system and had to use a version that friend of mine lean to me of windows 7 i do not erased the recover partition and i wish have access to this partition to get my windows version or try of install it from there again and have my own windows copy, how could i get access or unlock the recover partition and get the files and install windows from there.
View 1 Replies
View Related
Jul 16, 2012
How can I access a system partition to read and copy data? Two partitions were merged together and ended up as a system partition. All of my data files are in there.
View 5 Replies
View Related
Feb 24, 2009
I'm trying to get access to my word documents and files from my Vista partition without the "Read-Only". Do I have to log-on to Vista and change the settings from that OS? What settings do I need to change, it is confusing because I right-clicked the Vista Partition and enabled sharing but that did not work
View 1 Replies
View Related
Oct 9, 2011
The hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
View 4 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
May 9, 2011
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies
View Related
Jul 10, 2011
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies
View Related
Oct 19, 2012
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies
View Related
Jul 1, 2012
When I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
View 4 Replies
View Related
Jul 1, 2010
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
View 9 Replies
View Related
Mar 30, 2011
i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
Dec 19, 2012
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies
View Related
Jul 24, 2011
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies
View Related
Jan 14, 2012
I just cloned two partitions from a resident HDD to an auxiliary Momentus XL HDD in an enclosure that is connected to the computer via eSATA.Is there a way to compare each cloned partition with its original for integrity? If this were just a file, I'd use a unix/cygwin utility like diff or cmp.However, it is a partition.
View 7 Replies
View Related
Dec 29, 2010
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
View 9 Replies
View Related
Mar 16, 2012
i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Replies
View Related
Jun 6, 2011
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies
View Related
Apr 10, 2012
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies
View Related
Oct 22, 2009
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies
View Related
Mar 27, 2011
I am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
View 9 Replies
View Related
