Can't Access System Recovery Or Boot To Windows 7 After Installing XP
Dec 17, 2011
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active". I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart". I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message.
I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc. I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "Factory Image" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
I have a Toshiba laptop in which I installed my copy of Windows 7. Recently, it has not been able to boot: it just restarts when trying to. I tried the typical things:booting to safe mode, etc. but they all do the same. So I tried to sin the System Recovery Options, first from the Advanced Boot Options menu and then directly from my Windows 7 disk. In all these cases, the program gets stuck after selecting the "Repair Your Computer" option, as in this picture:The mouse keeps working fine, but all I can see is the background image, and no window pops up. I know that it is supposed to prompt me to select my windows installation, but that window never comes up. A similar thing happens when I try to install windows instead. It just never gets to the next step.Is there anything that anyone can think of that I could do to solve this problem?
2 Days ago my desktop running windows 7 ultimate 64- bits suddenly crashed, showing nothing but a black screen a bit less than a minute after starting up a game. A few seconds later my computer automatically rebooted and the repair tool launched. After it was done I took a look at the report and all it could find that was broken was ci.dll, the same as in previously mentioned topic. I ran CHKDSK and scf /scannow after that, but they couldnt fix anything or find any bad sectors. I could not boot windows unless i disabled driver signing as well, however I never get any BSOD's. My system is also a bit slower as well, but not that slow. After looking at the previously mentioned topic i downloaded FRTS64 and ran it as well, I've attached the log. (No, I did not run the code that you warned not to use on a different system and on a different machine )I'm also experiencing the same browser issues. When i enter an invalid URL I'm being forwarded to the url... website, my ISP. Also the first two times I tried to open my browser nothing happened. I waited about 15 seconds, tried again and then it opened.
I think it might be a virus as well, im using P2P a lot as well though i havent downloaded anything weird in a long while. My last 100-ish downloads (all fansubs for 2 anime series) have all come from the same site which i trust. however i did recently download a patch for a game, but that came from a site that is also used very frequently, and i havent heard of anything similar from friends/friendly gamers who downloaded the same patch.
I had a file recovery malware infection that i first cleaned with malwarebytes antimalware. Then i ran hitman pro and then it said it would delete a volume boot record and to restart pc.
When i restarted pc it wont boot up now. It says a disk read error has occured press ctrl alt del to restart. I cant even restart with ctrl alt del.
I tried to do a system restore but there are no restore points shown. That file recovery malware hid a lot of files i think and it seems like the main disk drive is now drive H.
I have a brand new Windows 7 64bit build with a clean install from an Upgrade CD and noticed in BIOS that my 1st boot device must be "Windows Boot Manager" or it asks for the CD. I only have 1 storage device (SSD) in the system and when I look under Disk Management in windows, it shows a 100MB "EFI System Partition" in addition to the primary partition (which is labeled "Boot, Crash Dump, and Primary Partition" - so it seems to have the boot files on it).
As I only have the one non-optical storage device I did not set any partition parameters at install. I Attempted to do a Startup Repair with the windows disc to maybe try and delete the EFI partition and got the "... System Recovery Options is incompatible with the version you are trying to repair" error. Not sure what that is. If Disk Management shows a healthy partition with "Boot" listed as being contained, why can I not select the SSD as boot device #1? I can boot perfectly fine with the Windows Boot Manager listed as boot device #1 and the SSD as #2, however it's not ideal.
I recently created a virtual server of window 2008 x86 enterprise edition. I installed integrated components and configured my educational / testing server and things were working fine until I rebooted the host OS and everything seems peachy but after the OS splash screen something seems to be conflicting locking the OS preventing the user login screen to appear. I checked the bios and intel virtualization Is on in the bios and I can load into safemode so the issue must be caused from some conflict that isn't loaded in safemode. Has anyone run into this issue before and what line of thought did they use to fix the problem -posted from the smartphone of a tired programmer so please forgive any grammatical or spelling issue
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
I've been using a HP pavillion dv6 3043TX, with a samsung hard disk, and built-in win.7 home premium and due to power short prob i was recommended by HP to create recovery DVDs (5 discs) and replace it. Now Ive replaced it with a 'seagste' of 450 gb capacity. A friend has installed a version of windows 7 ultimate with partitions. BUT i want to use the original pack i have recovered with all the HP tools and partition.
My rather new Acer Predator G has been acting up lately. I tried a restore point but this doesn't seem to help. As a last resort I was going to format the disk and re-install 7, however Acer never sent me recovery disks and I don't have 7 disks (Came pre-loaded). So my question is, if I can find someone with windows 7 disks can I use them + The CD key that's on the label of my desktop? Or do I need specific ones? Acer will send me recovery disks for 20$ but If I can pull this off for cheaper, I'd like to.
I have a H P Pavilion dv5 laptop that has windows 7.. I cannot access windows 7 or any of the recovery methods.. I've tried a system restore disk i burned from my wifes computer and it didn't work ... I cannot access anything except the systems configuration, boot options etc... Tried tapping the f8 key.. f11.. still no luck. At startup the HP logo comes on for a second then goes to a black screen with a flashing bar in the upper left hand corner of the screen.
I've just used the windows 7 utility on my hp station pc which is called "restore to factory" and this seems like went smoothly, but when I try to reboot the pc, and after the "preparing pc for first use" there's a text box popping up witch says "could not complete installation of windows, to install windows on this computer, restart the installation" and then the system reboots again, and it all starts over. I dont know how to restart the installation, and I don't have any cd/dvd or usb, tried to download the windows 7 usb/dvd download tool, but as a first step it is requested a .iso file which I don't have, and don't know where to find..
I have a 2 year old Gateway laptop (NV5929u) i5 430M w/ 4GB. It came with Windows 7 Home Premium 64-bit installed. The computer crashed with a blue screen a few months ago, and I could not locate the recovery disks, so I ordered a set from Gateway (1 System disk, 2 Recovery disks, 1 Language disk). My attempts at recovery were unsuccessful and I got the msg: failure disk 0 partition 3. I replaced the HD with a brand new one yesterday. My attempts at recovery went a bit further, to the point that the computer loads the information on the various disks, but when it tries to restart.
The hard disk of my Gateway NV78 notebook pre-installed with Windows 7 HP has crashed. I have made the recovery discs in 3 DVDs . I will be buying a new hard disk. I would like to know whether it is possible to install Windows 7 HP on the new hard disc from the recovery discs or I have to go in for a new installation disc.
Every time I boot my computer, it come up loading files, the open the boot recovery mode. If I leave it, it says that it fix one error, then it restarts and does the same again. The error was that it the boot.ini was missing. So I booted it up with ubuntu, and created an empty boot.ini file, then booted the minitool partition wizard (Partition Wizard Bootable CD allows user to manage partition directly with partition manager bootable CD.) and configured the boot.ini. But still no luck. It's booting into recovery mode because that is the first partition.
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
The hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
My HP Pavilion DV7 laptop will not do a system recovery after I hit F11 when I boot the PC.The recovery drive on my computer says it's just about full.It's running windows 7 64-bit
I have a Dell XPS 17 laptop that has dual drives - c & d.The c drive crashed and was replaced by dell.We are now trying to do a system image recovery from the d drive.We are following How to do a System Image Recovery in Window7 from seven forums.com.url...After Selecting the System Image from the D Drive (STEP TWO, # 5 and 6), the computer prompts to create a repair disk.The only way to move forward is to create or not create the disk.In either case, it then has you restart the machine, takes you through the process again.. Step 5/6.Never gets to Step 7 to actually DO the System Recover.
i have vaio laptop when i get it ,it was contain only local disk(C) so i made shrink to create another logical derive (D)so, when i recovered my laptop after that i lost (D)?
My neighbor was having issues with their laptop and since I'm a bit more tech savvy I'm attempting to fix it for them. The laptop is a Toshiba Satellite L505d-S5983. Its about 3 years old. They had an issue with the laptop and now whenever it starts up windows it shows an error screen that gives error f3-f200-0002. Apparently this can happen to Toshiba laptops. Seems there is a corrupt Windows 7 file and I need to do a system restore. There are no system partitions to do a back up of. I burned a disc on another laptop of the Windows 7 System Recovery Environment and changed the boot drive to the disk drive in the BIOS. Now it loads the disc and loads up the Windows 7 System Recovery Environment. The problem now is it doesn't detect a Windows installation. It gives me an option to load a driver from c:WindowsSystem32 to detect the Windows installation, but I don't know which file has information about the Windows install.
I decided to recover the windows and I haven't made the recovery disc yet, so I will recover from from windows directly from hp recovery systemI just want to know how many times can I use this option for later?
I got a new HP laptop ame with window 7 home premium. I decided to have dual boot so install ubuntu 11.10. The bad thing is i didn't make a recovery disc and now windows 7 cant boot. It does show up in the grub menu but when i choose windows7 it give me an error that windows can't boot it might be because of hardware or software change.
Drive is not accessible in windows 7. I installed W7 on Drive C and Drive D is visible but not accessible. Both C and D are partitions on the same HD. I had Windows XP on drive C before and formatted it and installed W7 on it. I have a lot of material saved on Drive D and cannot afford to lose them. What can I do to let windows 7 access drive D?
I have a HP laptop with a Vista Home Premium 64 bit on it now that came with no recovery disc from HP like on all DV2 laptops from HP.
So question is if I order the upgrade W 7 Home Premium preorder and install it on my laptop it should be no problem the first time even with out recovery disc since Vista will be on the harddrive. But if I do a second clean format reinstall say a year later (after the first upgrade install) to freshen up my laptop, will there be a problem installing Windows 7 the second time since I have no recovery disc of Vista to put in the DVD as proof?
I would like to create a Bootable Recovery Partition On my laptop, just like the one that came from the manufacturer, except since I am migrating to Windows 7 I need to have that recovery partition be Windows 7 as well. The laptop came with Vista Home Basic Edition.
