Windows 7 Not Installing Properly From OEM Recovery Disks
Oct 17, 2012
I have a 2 year old Gateway laptop (NV5929u) i5 430M w/ 4GB. It came with Windows 7 Home Premium 64-bit installed. The computer crashed with a blue screen a few months ago, and I could not locate the recovery disks, so I ordered a set from Gateway (1 System disk, 2 Recovery disks, 1 Language disk). My attempts at recovery were unsuccessful and I got the msg: failure disk 0 partition 3. I replaced the HD with a brand new one yesterday. My attempts at recovery went a bit further, to the point that the computer loads the information on the various disks, but when it tries to restart.
My rather new Acer Predator G has been acting up lately. I tried a restore point but this doesn't seem to help. As a last resort I was going to format the disk and re-install 7, however Acer never sent me recovery disks and I don't have 7 disks (Came pre-loaded). So my question is, if I can find someone with windows 7 disks can I use them + The CD key that's on the label of my desktop? Or do I need specific ones? Acer will send me recovery disks for 20$ but If I can pull this off for cheaper, I'd like to.
i got a windows 7 2012 virus by downloading a picture so i wanted to use my homemade recovery disks that i made when i first purchased the laptop and i dont know how to use it. i pressed f2 to go to boot options but cds wasnt listed, also when i restarted the laptop with the cds inside it doesnt prompt me to do anything, it justs boots normally. how do i use these disks?!
Is there a repair with these disks? I am getting a BOOTMGR missing but I checked the hard drive and it is fine. I do not want to lose anything because I have a lot on it.I cloned my image about 5 days ago and I may go that route, however, I have done things since then and don't want to lose the data. Before I load the HP Recovery disks (4 of them, and I had to order them for free except pay for shipping), is there a repair option?
I have the original recovery disks I made when I first got my laptop and am wondering if I could use them to install windows 7 onto my desktop?A few details if needed...laptop - toshiba satellite p755d 4 months[CODE]
I got Windows 7 up and running on the Crucial drive (connected at SATA3_1, with the WD connected and functioning on SATA3_A1) and then decided it was time to get Xubuntu up and running on the OCZ (SATA3_0). So I installed rEFInd on the Crucial's ESP and it worked - I was able to launch Windows 7 from the rEFInd menu. I then disconnected the Crucial and connected the OCZ, and installed Xubuntu. In the UEFI, I set rEFInd as the boot device/manager, and from the rEFInd menu I can select Xubuntu and Windows 7 - great. However, I can only actually boot Xubuntu; booting Windows 7 results in a Windows Error Recovery loop.Disconnecting all but the Crucial SSD, I can get into Startup Repair. It attempts repair for several minutes, fails with the following details:Quote :Problem signature:
Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown
Trying to create the 3 recovery discs for my new computer with Windows 7. It keeps asking for a clean disc even though I am putting in new formatted disc. I was able to create the System Recovery Disk with no trouble.
My Laptop came preloaded with Windows 7 Home Premium and I would like to create system recovery disks. I have a drive labeled RECOVERY (D. How do I create recovery disks from this drive?
i have question, where can i download original Recovery Disks for my Packard Bell Easynote TSX66-HR-263CZ notebook? i cannot find them on the original page of packard bell..
I have a toshiba satellite L740 laptop. I have created the recovery disks from recovery media creator. I am trying to reinstall windows 7 using these disks but i'm not knowing how to do that. I am not able to enter the bios settings on start up. Should i have the original windows 7 installation cd to reinstall windows or can i use the recovery disks? I was not given any windows installation cd when i bought this laptop.
my 5 month old computer would no longer boot, it automatically ran start up repair, after about 6 hours said could not repair, took me to restore, but then said couldn't restore due to I/O error, tried recovery option with data back up with disks but get fail due to I/O error, tried again on the complete factory restore and got error of not enough memory to complete. can I recover my system?
Having crashed my wife's dual-boot system, and the HP recovery section is no longer available. We have got it back up using the hp windows 7 update disk from hp. (had vista). What I need to know is best way to back up our data before I crash something again. Will windows 7 help me build "recovery" disks that also back up our personal data... or should I back up our personal data another way? We have no Windows 7 installation disk - just the upgrade disk from HP (Vista to Windows 7). Reason for asking: I have 2 corrupted partitions in linux that I need to reformat and I want our data backed up before I start.
i'm going to go from 32 bit vista to 64 bit windows 7 and i want to know if files from my other hard disk that i use which doesn't contain any windows files or anything like that will be wiped when i'm installing it. also will it delete all of my files on the original C hard disk?
My hard drive crashed on my laptop. Before It crashed, It gave me a hard drive warning of imminent failure, and gave me an option to create recovery disks. I ended up creating 11 disks from the option. I installed the new hard drive and the BIOS reads that it will boot from the internal optical drive first. When I insert the first CD and start then computer, it continues to read "Operating system not found". When I look at the CD in another computer, it reads three files and one folder. The first file is an icon file which reads "Setup", the next is a "Media" bin file, and the last is an autorun setup information file. The last is a folder that contains various other backup files. My computer did not come with any copies of windows.
Computer freezes when installing games from disks. I've replaced my DVD-Drive and it doesn't fix the problem. I've also re-installed windows 7 64 bit and it still doesn't solve the issue
I purchased hp laptop, pavilion g6, windows 7 before five months. There were two partitions c and D. D was fixed for recovery which is damaged now. How can I recover windows 7, my sound is not working properly as well.
Just purchased a new MOBO and some other new hardware a couple of weeks ago. I am using the same Windows 7 Pro copy I had on my previous mobo and HD. After I installed Windows 7 Pro onto my SDD (with a HD as my secondary storage), I was getting BSOD and SP1 would not install (but other updates would prefectly fine). I re-installed (cleanly) Pro a couple of days ago. Now, barely any of the updates work. There are various failure codes, such as the ones in the title--and no distinct problem.
I was able to download some updates by only selecting 1-3 at a time. However, with 118 updates...I eventually lost my patience (plus, sometimes a few would still fail even at only 1-3 at a time).
The failure process at first was at the download stage - the progress would freeze randomly at 7% or whichever. After several more attempts it got through to the installation phase. Now installations randomly stop at a random file. Upon restart, Windows fails to configure updates and nothing is accomplished.
Now a weird thing is, that with some of my larger files (2+mb), I will sometimes see like 5.1mb - 10mb for the listed file size. Also, on my main Windows Update screen (the one which lists how many important and optional updates you can download), it says "79 important updates selected, 236.2 MB - 1,059.8 MB."
I have tried: -FixIt -Deleting all temp files -Deleting DataStore
Random Specs: Windows 7 Pro ASUS P8Z77-V Pro Samsung 830 64GB SSD
trying to reinstall windows 7 on my laptop with a new hdd. it installs the os but wont read the hdd to boot, but it does see it in bios. trying running maxblast and wiped it clean but same prob still. noticed in maxblast that hdd is designated as drive d instead of c.
I newly tried to install sql server 2008 but when I install I got a error message. The sql server encountered the error: The System database file Master.mdf already exists in C: Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData. Error code 0x84b40000. I tried to delete the folder but I can't. What shall I do now.
since i have clean installed windows 7 on my laptop my dvd drive is not working properly. it starts reading the disk and stop and keep doing it several times and finally i removes the dvd. i have even cleaned the lens with lens cleaner but still it do read erroe many times.
My laptop is an inspiron n5110 and before my warrenty expired i had to have the hard drive replaced. Its been maybe a year or two since that happened. My computer was not updating with windows update since mid oct. and my firewall was down for i dont know how long. I had the IT guy at my work look at it and somehow my BYTES (i think thats what it was) driver was deleted from my computer and my java update somewhere along the line had corrupted my updates too. He said to do a restore and if i wanted he could completly wipe my hardrive clean for me. Well i did a factory restore yesterday and finished installing the last two disks today. Now i cannot connect to the internet and it is saying my drivers were not downloaded correctly. Should i do a factory restore again or have the IT guy wipe it clean? We even hooked up my computer directly to the router through an eithernet cord.
I've been using a HP pavillion dv6 3043TX, with a samsung hard disk, and built-in win.7 home premium and due to power short prob i was recommended by HP to create recovery DVDs (5 discs) and replace it. Now Ive replaced it with a 'seagste' of 450 gb capacity. A friend has installed a version of windows 7 ultimate with partitions. BUT i want to use the original pack i have recovered with all the HP tools and partition.
Purchased a brand new Asus USB-BT211 bluetooth dongle with the express goal of connecting a wiimote to my new computer. the machine runs Windows 7 x64, the drivers for the dongle install without a problem, and the bluetooth searching mode on the "add a device" screen appears to be running without a hitch.
when i place the wiimote into sync mode (holding down the red button), it never appears to be visible to the computer, and doesn't show up on the add a device screen. When I attempt this procedure with either of my other two laptop computers, (running Windxows Vista x86) using the same dongle, the wiimote syncs without a problem and can be used with other utilities such as glovePIE and JoyToKey and Dolphin.
So, tell me, Why is it that Windows 7 refuses to see the wiimote when i try to make the connection?
I've just used the windows 7 utility on my hp station pc which is called "restore to factory" and this seems like went smoothly, but when I try to reboot the pc, and after the "preparing pc for first use" there's a text box popping up witch says "could not complete installation of windows, to install windows on this computer, restart the installation" and then the system reboots again, and it all starts over. I dont know how to restart the installation, and I don't have any cd/dvd or usb, tried to download the windows 7 usb/dvd download tool, but as a first step it is requested a .iso file which I don't have, and don't know where to find..
