Trying to create the 3 recovery discs for my new computer with Windows 7. It keeps asking for a clean disc even though I am putting in new formatted disc. I was able to create the System Recovery Disk with no trouble.
View 5 Repliesjust setting up a friends new dell laptop create system disks - no mention in the manual how to
s511016au dell inspiron 1545 laptop.
it only came with software application disks.
i got a windows 7 2012 virus by downloading a picture so i wanted to use my homemade recovery disks that i made when i first purchased the laptop and i dont know how to use it. i pressed f2 to go to boot options but cds wasnt listed, also when i restarted the laptop with the cds inside it doesnt prompt me to do anything, it justs boots normally. how do i use these disks?!
View 5 Replies View RelatedIs there a repair with these disks? I am getting a BOOTMGR missing but I checked the hard drive and it is fine. I do not want to lose anything because I have a lot on it.I cloned my image about 5 days ago and I may go that route, however, I have done things since then and don't want to lose the data. Before I load the HP Recovery disks (4 of them, and I had to order them for free except pay for shipping), is there a repair option?
View 4 Replies View RelatedMy Laptop came preloaded with Windows 7 Home Premium and I would like to create system recovery disks. I have a drive labeled RECOVERY (D. How do I create recovery disks from this drive?
View 9 Replies View Relatedi have question, where can i download original Recovery Disks for my Packard Bell Easynote TSX66-HR-263CZ notebook? i cannot find them on the original page of packard bell..
View 4 Replies View RelatedI have a toshiba satellite L740 laptop. I have created the recovery disks from recovery media creator. I am trying to reinstall windows 7 using these disks but i'm not knowing how to do that. I am not able to enter the bios settings on start up. Should i have the original windows 7 installation cd to reinstall windows or can i use the recovery disks? I was not given any windows installation cd when i bought this laptop.
View 4 Replies View RelatedMy rather new Acer Predator G has been acting up lately. I tried a restore point but this doesn't seem to help. As a last resort I was going to format the disk and re-install 7, however Acer never sent me recovery disks and I don't have 7 disks (Came pre-loaded). So my question is, if I can find someone with windows 7 disks can I use them + The CD key that's on the label of my desktop? Or do I need specific ones? Acer will send me recovery disks for 20$ but If I can pull this off for cheaper, I'd like to.
View 3 Replies View RelatedNot only do I get Error Code= 1117, I also get an I/O device error, how can I reboot if there are errors?
View 1 Replies View Relatedmy 5 month old computer would no longer boot, it automatically ran start up repair, after about 6 hours said could not repair, took me to restore, but then said couldn't restore due to I/O error, tried recovery option with data back up with disks but get fail due to I/O error, tried again on the complete factory restore and got error of not enough memory to complete. can I recover my system?
View 9 Replies View RelatedI have a 2 year old Gateway laptop (NV5929u) i5 430M w/ 4GB. It came with Windows 7 Home Premium 64-bit installed. The computer crashed with a blue screen a few months ago, and I could not locate the recovery disks, so I ordered a set from Gateway (1 System disk, 2 Recovery disks, 1 Language disk). My attempts at recovery were unsuccessful and I got the msg: failure disk 0 partition 3. I replaced the HD with a brand new one yesterday. My attempts at recovery went a bit further, to the point that the computer loads the information on the various disks, but when it tries to restart.
View 1 Replies View RelatedHaving crashed my wife's dual-boot system, and the HP recovery section is no longer available. We have got it back up using the hp windows 7 update disk from hp. (had vista). What I need to know is best way to back up our data before I crash something again. Will windows 7 help me build "recovery" disks that also back up our personal data... or should I back up our personal data another way? We have no Windows 7 installation disk - just the upgrade disk from HP (Vista to Windows 7). Reason for asking: I have 2 corrupted partitions in linux that I need to reformat and I want our data backed up before I start.
View 4 Replies View RelatedI have the original recovery disks I made when I first got my laptop and am wondering if I could use them to install windows 7 onto my desktop?A few details if needed...laptop - toshiba satellite p755d 4 months[CODE]
View 7 Replies View RelatedI have a HP pavilion DV6 windows 7 that came with back up discs and I cannot get them to work! How do I do this?
View 2 Replies View RelatedI had to replace the hard drive. Have no recovery or windows disks. What do I need and where can I get it??
My hard drive crashed on my laptop. Before It crashed, It gave me a hard drive warning of imminent failure, and gave me an option to create recovery disks. I ended up creating 11 disks from the option. I installed the new hard drive and the BIOS reads that it will boot from the internal optical drive first. When I insert the first CD and start then computer, it continues to read "Operating system not found". When I look at the CD in another computer, it reads three files and one folder. The first file is an icon file which reads "Setup", the next is a "Media" bin file, and the last is an autorun setup information file. The last is a folder that contains various other backup files. My computer did not come with any copies of windows.
View 1 Replies View Relatedi am using acer 5745g, when i tried to use the recovery disks created earlier, it is unable to load even i tried everything from the boot menu..
View 1 Replies View Relatedwhich of the 5 recovery disks from geek squad has install media for device?
View 1 Replies View RelatedJust built a new PC, specs as follows:
3770K
32GB DDR3
ASRock Z77 Extreme6
Crucial M4 128GB (from previous build)
OCZ Vertex 4 128GB
WD 400GB (from previous previous build)
I got Windows 7 up and running on the Crucial drive (connected at SATA3_1, with the WD connected and functioning on SATA3_A1) and then decided it was time to get Xubuntu up and running on the OCZ (SATA3_0). So I installed rEFInd on the Crucial's ESP and it worked - I was able to launch Windows 7 from the rEFInd menu. I then disconnected the Crucial and connected the OCZ, and installed Xubuntu. In the UEFI, I set rEFInd as the boot device/manager, and from the rEFInd menu I can select Xubuntu and Windows 7 - great. However, I can only actually boot Xubuntu; booting Windows 7 results in a Windows Error Recovery loop.Disconnecting all but the Crucial SSD, I can get into Startup Repair. It attempts repair for several minutes, fails with the following details:Quote :Problem signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
[code]....
I recently upgraded my Acer 722 netbook to an 265GB SSD and installed Windows 7 on it. I was wondering if there was a way to create a partition for a recovery environment (just in case something happens). I have a system image of this pc saved, however I feel it would be best to also create a recovery partition.
Note: This does not have a CD drive.
My Emachines Recovery Management will not restore windows 7 it gives me error code=1392 The files or directory is corrupted and unreadable.H
View 1 Replies View Relatedpackard bell recovery management windows 7 copy
View 4 Replies View RelatedI installed 7 on my Dell laptop that has no CD-ROM drive. I created a partition (D and set it to Active, installed from that partition, doing a quick format over Vista (C.
All was fine and dandy, but I was getting some boot option, I'm assuming because the Active drive had the install files on it. No problem, I'll set the C: partition to Active.
Reboot, should go away right? Wrong. "Bootmgr is missing."
No problem, there has to be a way to fix this. I'll put the CD in and recover... Or not!
What I have is a 2 gig USB thumbdrive, is there anyway to fix this problem with that? If not, what are my options.
Using the factory Dell restore to get Vista back won't work, I bought the laptop secondhand and they screwed that up.
I am not sure if this is possible however is there a way of installing Windows 7, ctivating it with my OEM key and then created a recovery partition just in case I am ever in the situation where I need to run it using a hot key during boot?
View 8 Replies View RelatedAfter purchasing my new Student Version of Windows 7 Professional I was keen to do a full system format, and start fresh. I no longer had a need for the Dell Recovery Partition which contained Vista (and a decent amount of bloatware), so I removed all partitions from my disk to start with a blank 180GB HDD.
I thought to myself, if I am going to start fresh I might as well do things right and mimic Dell’s setup with a recovery partition of my own. Now to be fair, this isn’t an extremely wild idea as there are plenty of manufacturers and software companies who provide such solutions very simple and easy. Everyone knows that Norton Ghost is fantastic, and Acronis TrueImage is right there with them. Of course you can simply run-up Imagex along with WinPE and sysprep a WIM to re-image your HDD at anytime for a free solution.
However, all these solutions require that you have some sort of recovery media for boot time operation, and the Imagex solution isn’t for the faint of heart. Now I do a lot of travel, and I wanted a solution that didn’t require me to look after a bootable DVD or USB stick, and because I am working with a laptop I didn’t have second disk which I could boot from via BIOS settings. My recovery solution had to be a Primary Partition on my only HDD with boot time options (in case my system is completely rooted.)
This turned out to be quite the challenge, as Windows 7 / Vista no longer support the simple easy boot.ini file that allows you to manually adjust boot time parameters. Instead Windows 7 / Vista have moved onto some fancy form of bootsect / BCD (Boot Configuration Data) which is very difficult to edit manually. Thankfully all of my hard work paid off and I now have a self sufficient system with all the diagnostics and re-imaging tools I could ever need. And thanks to Windows 7’s new Backup and Restore options, I was also able to include a system image which contained all of my settings and applications so that I don’t have to sit through 10 hours of Windows Update again.
What I ended up with is a Primary partition on my HDD that is a full and complete bootable version of the Windows 7 installation media. When I choose this partition at boot time it is exactly as if I have inserted the Windows 7 Install DVD into my disk drive! I can utilise all of the tools in the Windows Recovery Console (which includes the option to restore from a previously created system image), or I can simply re-install Windows 7 from scratch - without affecting my restore partition or boot menu variables!
I've created the recovery DVDs, but unbeknown to me at the time - you're only allowed to create one set. What i'd like is to put this onto a USB stick.Currently i have:DVD #1 - Boot Media: (312mb)The boot DVD containing "BOOT" folder, BootMgr file which is quite small & Winre.Wim at about 300mb.DVD #2 - Data DVD #1: (4.03GB)factory recovery folder, recovery folder & Autorun fileDVD #3 - Data DVD #2: (3.87GB)factory recovery folder & recovery folder (NO autorun file)DVD #4 - Data DVD #3: (3.04GB)factory recovery folder, recovery folder, LenovoQDrive file, qdrive icon file.My USB stick is 16GB capacity.So basically i'd like to make the USB stick the recovery media. I can't do this from the laptop as Lenovo only let you create one ......... so how can i do this
View 9 Replies View RelatedI have a computer with the F10 option when I first turn on the computer. The hard drive failed so I have replaced it and installed windows 7. I am wondering if I can create a recovery partition when I turn on the computer and use the F10 option to restore back to when I first installed windows 7?
View 9 Replies View RelatedI made it through the "copy file"s part, then in "verify files" it froze at 89% for about the last half hour.
It says I can only make these files once. If this doesn't finish, will it let me retry?
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies View RelatedUnder computer I go to my drive of folders. When I click new folder either by right clicking or by hitting new folder the system then creates 2 or 3 new folders at one time. I then have to go back and delete the extra folders. At first I did not mind because it only happened once or twice and now it is every time.
View 4 Replies View RelatedI have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies View Related