Im trying to partition the drive but I cant make the C drive less than 500gb. I followed this guide How to Resize Disk Partition in Windows 7. How do i make it smaller. I wanted to make C for Windows 7 and extra, but not half the hard drive.
View 1 RepliesI have a 500 GB Western Digital Hard Drive, I can't access one of its partitions, it says access denied, and I have the ownership and all security stuff is marked for my account and system. Still can't access it, while I can when I boot from my other hard drive which have windows XP.
View 3 Replies View RelatedI have a Hitachi 2TB Hard drive with about 1.2 TB worth of data (it was my data drive for my SSD). I've recently had to temporarily move motherboards (from a Z77 Motherboard to a Dell Foxconn from 2007). However, I can't use my SSD on the Foxconn (G33M) so I made a 500GB partition to use for WIn7 until I get my mobo back. However, I can't install because Windows keeps saying I can't install on a GPT partition. Before I would just change the mboo into EFI/UEFI mode to fix it, but my 2007 board doesn't support it.
View 3 Replies View RelatedHow to partition hard disk 500gb
View 2 Replies View RelatedMy 750gb hard disk is failing on a HP laptop that came preloaded with Windows 7 home prem. I have a SMALLER excellent 500gb, 7200 rpm hard disk that I'd like to replace the failing hard disk with. I've read that my Windows 7 System Repair DVD will not restore my recent system image (on NAS) to a smaller partition. The C:partition on the failing drive is well over 600gb but can shrink to 300gb. QUESTION Can I restore a system image from my larger drive "as is". If not, and I shrink my C: partition (contain windows) ay 350GB will I be able to restore the system image to where windows will boot?I have an old copy of (7.0) partition magic that I used to resize partitions on XP machines Can this old 32 bit partition magic safely resize my C: partition. If so, and I create a new system image can I restore it to the new disk?
View 5 Replies View RelatedI have an external western digital HD which is 2x 500gb sata drives that mount to 1tb, I assume there bridged to make the 1 TB possible my question is that ive decided to put these in my pc case(couldnt do it before) as media drives etc, I put both in, but my pc only sees the one 500gb drive is there anything I can do for me to see both.
EDIT also ive just noticved I can actualy see the non working drive in BIOS.
My Computer indicates only 35Gb free on my drive, and dropping daily. WinDirStat shows 400Gb of 'unknown' files which I'm unable to delete (option greyed out). I have used various drive cleaners, done a chkdsk & a full system virus scan to no avail.
View 5 Replies View RelatedNeed a WDC RE3 SATA Driver for a DC7100 and a Windows 7 ICH6R Controller Compatibility Issue
I'm trying to install a Western Digital RE3 500GB SATA Drive on to the System but the Latest Version 2.15A of the 786C1 Bios is listing the drive at 0.0 MB and Windows 7 doesn't see the drive at all. I'm trying to install Windows 7.
The WDC Site recommends that I contact my motherboard manufacturer, so I'm following their recommendation and posting my request for a DC7100 SATA Driver for a WDC RE3 Drive here.
I've been to the Intel site and there doesn't seem like there is a proper Windows 7 Update for the ICH6R Controller since the Intel® 82801 FB/FR I/O controller has been discontinued.
I want to download the Intel® Matrix Storage Manager Floppy Configuration Utility dated 7/2009 from the Intel site, but I need confirmation from HP Support that this utility will work with a DC7100 with he Latest Version 2.15A of the 786C1 Bios for a Win 7 install.
Iomega eGo 500GB External Hard Drive isn't recognized
View 1 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
I have a WD 500GB HDD plugged into my PC via USB, the drive was brand new and had a 90GB partition and a 410GB partition on it, I formatted the larger partition with Partition Wizard and now in disk management the drive only shows as 90GB, there is no unallocated space where the partition was before. I've run 5 different partition recovery tools (Partition Wizard, Acronis True Image WD, Easus Partition Recovery, Partition Table doctor, Active Partition Recovery) but none of them can see anything more than 90GB, what's happened to the rest of it and how can I recover it?
View 9 Replies View RelatedI recently bought an HP Elite Book and I decided to pick up an OCZ Vertex 3 for the computer (120GB SSD). I normally use Norton Ghost for a lot of things I do so I decided to use Ghost to Image the OEM HDD that came with the laptop too the SSD. I went in used the command prompt screen to use the switch -ntexact so it would work, did Disk -> Disk image and ran the process. Now when the unit boots with the SSD in it, it's getting hung up on the starting Windows 7 Screen.
View 3 Replies View RelatedI have Windows 7 64 bits in a DELL Laptop Latitude E4300 working fine (more or less). I just plugged into it a USB HD from iomega with 500 GB capacity. I can see this disk without problems in all my XP (32 bits) based systems. But not on Windows 7. When I try to open it I get the error message:
Cannot access F:
The archive is damaged or inaccessible
I know the disk is fine. I have in this very same computer vmware installed with Ubuntu 64 bits where I can mount the HD and see it without problem (?) but not in the host Windows 7 system. I saw a driver installation message the first time I plugged into the laptop on Windows 7 but clearly, this was incorrect.
Should I uninstall the driver and get it from somewhere else other than the default place (which did not seem to work well)?
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.
I have a spare sata 500gb hdd.Thinking of getting a caddy to hold this drive so that I can make use of it,On the other hand I have seen desktop docking station for a hdd. Just want to know which one would be the best to get. A Caddy or the docking station?
View 9 Replies View RelatedI was playing Mass Effect earlier. Got off because of school, so i put it to sleep. When i returned home, I tried getting on steam. The path wasn't found, so I didn't think anything of it. Rebooted. Still no path, so i go to my slave HDD, and surprise! It wasn't there for some reason. I've looked for it in disk management; no where to be found. Ran seatools, no luck. I had around 300 GiGs on there.I also turned off the laptop, took out the battery, and both master and slave drives for an hour. NOTHING.
EDIT: when i check disk management, it seems there is a drive of some sort on there, but it has no name.. It's blank. Nothing but *Status* has any information: "Healthy (OEM partition)." When i try to right click, the menu only has a "Help" tab.
Almost all my files are in this hdd and it won't work anymore. just restatted my pc and suddenly it won't show up. it's my back up/storage hdd...
View 5 Replies View RelatedI just purchased the wd mybook 500gb studio e stata and using it with windows 7. When i try to access the drive it say's. "please insert a disk into removable drive"
View 4 Replies View RelatedI recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedUnable to see 500GB Samsung HM500JI in Windows 7
View 1 Replies View RelatedIs there a way to easily downgrade to Windows 7 32 bit without having the 32-bit disc? Maybe a program to do all the bitchwork while I basically sit back?
View 6 Replies View RelatedI have seagate freeagent goflex usb device of 500GB its not reading .please hlep in the same. i have lots of data in that hard disc.
View 1 Replies View RelatedThe software that came with my Go Flex external hard drive accidently got eraced.
How do I get it back?
Bought a Dell laptop a year or so ago. It has one Hard Drive broken into C and D partitions. C is a lot smaller than D and is almost filled up, with next to nothing on D. My Documents is on C and is probably accounting for a lot of the used space. I need more space on C to install more programs.
View 8 Replies View RelatedI have a clone image of my 500 GB (nominal) laptop drive backed up to 750 GB USB external and would like to allocate the remaining space on the 750 as a separate extended partition. Is that possible using W7 disk management? I have looked, but cannot see a way to do what I want on this NTFS-formatted basic drive. This is the layout of the two drives:
View 2 Replies View RelatedHow to partition the c drive
View 3 Replies View RelatedI just purchased a new computer with windows 7 installed. So far all I have done is hooked it up and turned it on and it did it's thing for the first time. Before I go any further, I would like to partition the 1tb hard drive into several drives. I have no idea how to do this.Everyone I have contacted, is a charge support. I can't go that way
View 14 Replies View RelatedI read about dual boot win xp (first ) and win 7. It says: win 7 does not see the win xp partition/drive and change made in win 7 ALMOST makes no change in win xp.So change in win 7 in this case does make change in win xp. What is it ?
View 3 Replies View Related