Basically I put a new hard drive into my laptop and tried to install windows 7. It keeps saying bootmgr is missing, press ctrl + alt + del to restart. The OEM windows 7 disk is inside my cd-rom drive and I went to the bios and put the cd/dvd as first, and the hdd as second, pressed f10 (save and exit.) and still no luck.
View 3 Replies
When i first installed windows 7, everything was going great. until i restarted without the windows 7 disc in my drive... then it all went wrong.
I have three hard drives.
1) Windows Vista 32bit Ultimate
2) Windows 7 Ultimate RC 32bit (partitioned in half, primary and logical)
3) Storage of my junk
The second hard drive is 160gb, partitioned in half to make to 80GB's. They are all sata, along with my dvd drives.
When i turn my computer on with hard drive 1 set to boot first, it boots vista perfectly fine. (no option comes up to pick an operating system)
When i turn my computer on with hard drive 2 set to boot first, and i DONT have my windows 7 dvd in, it comes up with BOOTMGR IS MISSING...
When i turn my computer on with hard drive 2 set to boot first, and i DO have my windows 7 disc in, it works perfect.
Is there a way to not have to put the disc in to boot all the time?
And its also strange that i dont have an option to select which operating system to boot from... its either one or the other
I have tried unplugging seperate hard drives and nothing changes, and i have tried start up repair from the windows 7 disc - still nothing.
The second problem i have, is hard drive 3. it is recognised in vista, but whenever im using windows 7, it does not detect the drive. Any ideas why it appears in vista and not 7?
i tried unplugging and re-plugging when the computer is both on and off, and its ALWAYS detected in the bios, just not windows 7.
I'm not entirely sure if this is the right category for this thread, but it seems to be the one that closest fits my problem.
A bit of background detail to this story (which you may already know if you've seen my other threads):
I had my desktop PC running W7 fine despite some hitches with an old hard drive of mine. I was able to get hold of a slightly higher specced system recently (a pre-built Acer Aspire T650-8B7H, if that means anything to anyone which has a slightly faster processor, an apparently better motherboard, yada yada) and so transferred my 9800GTX+, RAM, PSU and hard drive in to the new PC.
However, obviously Windows 7 didn't like the significantly different hardware so I nuked the drive and went to reinstall Windows 7, only to find that the Windows 7 install disc refused to pick up my SATA drive (which I had Windows 7 installed on before) in the new PC. Conveniently at the same time my problematic hard drive completely died on me, so I shrugged it off as that being the problem. However...
I've just bought myself a 500GB Western Digital Caviar Black hard drive. It's very nice, and I had no problems partitioning it up and installing multiple linux distributions on multiple partitions. However, I stuck my Windows 7 install disc in to install it on the drive. I choose to make a custom installation and... nothing. The drive just doesn't show up. I'm told to load drivers, but since when do you need to install drivers for an internal hard drive?
I've had this problem before and thought it was a problem with the hard drive, but it shouldn't be happening to a brand new drive. The install disc picks up IDE drives just fine, but as of yet it hasn't found either of the SATA disks I've had in there.
Any ideas? I would put it down to a BIOS setting but I had no problems installing Linux on other partitions of the same drive.
While installing Windows 7 on a fresh formatted disk, I am getting this msg all the time. The installation disk wont boot. I can't access anything. No repair... Nothing. I've tried also my old windows XP disk to get it to boot, but same error msg... BOOTMGR missing...
View 3 Replies View RelatedI purchased a vizio all in one desktop model CA24-A2 , with windows 7 installed. I upgraded it to windows 8, but decided to return back to windows 7 because the Metro UI always crashes on me. I purchased a windows 7 disc and booted the computer off the disc. When the installation asks which drive to install it to, nothing appears. For some reason, the installation disc is not reading the drives. I've checked vizio's page, but didn't find any drivers for the hard drive that would work. I check the Bios menu and both drives appear. I've read on other forum about changing the bios mode (AHCI,IDE), but my bios menu is very restricted, and i dont have that option available. I used MiniTool Partition wizard on a bootable cd, and it was able to see my hard drives as well. I added some pictures below. When i try to boot windows with windows 8, "bootmgr is missing" error appears. After restarting my computer several times it seems i only have access to the bios menu f2, and not f8 for recovery.
View 4 Replies View RelatedI've had a problem with my computer booting up ever since I did a clean reformat.Whenever I turn on my computer, it goes to the black screen and says the default, "Bootmgr is missing, press ctrl alt delete to restart, blah blah blah".The only way to get it to work is I have to press F12, and select my HDD and pressenter twice. It then successfully loads and such and does fine from that point on.Problem is, it's kind of annoying and I want to rid of it.I'm currently at work, but when I get home I'll be more than happy to take some screenshots and stuff if th
View 14 Replies View Relatedi tryed reinstalling windows 7 and now when i turn it on no matter what sorces i use (usb or cd/dvd) it wont load the windows 7 disk to repair or install im stopped at BOOTMGR is missing press ctrl+alt+del to restart i pressed f2 to make it boot from cd and usb first and pressed f12 to try and boot directly but nether work?
View 2 Replies View RelatedBootmgr missing error. Dell Inspiron 560. DVD drive won't read disk to reload. Downloaded disk to USB n it won't reload. Changed boot options thru f12 key to no avail. Also can't access command prompt or any recovery key.
View 9 Replies View RelatedHave formatted this disc 2x and still get Bootmgr missing error, wont take a new install of an OS. Originally had windows 7, have key but no install disc for that, tried installing XP and could not get to bios?
1. Is it a bad hard drive?
2. Is it in the motherboard?
Is there action I can do? Pc will only allow for ctr. alt del which gets you back to square one again?
I have a HP Mini netbook which is just out of warranty. When I start computer i get a black screen with the message bootmgr missing.I have tried recovering system using start up recovery, etc, etc but still end up at same screen.I can get into the command prompt screen but have no idea what to do next.. have found on the web is for laptops/pcs with a disc drive, mine doesnt have one.I am not an expert on computers so
View 1 Replies View RelatedI have recently installed a new cpu cooler and tidied up my cables, I have replugged in my sata cable but now I have the no bootmgr problem, all was good before this and now I can't start windows 7.
View 3 Replies View RelatedI just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies View RelatedI just started having an issue on a clean install of Windows 7 SP1 build 7601.The icons for the W & Z partitions is suddenly showing as a broken link.I have tried right clicking on each partition > properties > customize > restore default folder picture and there is no change for either to update the icon.
View 2 Replies View RelatedAny way i got this question i want to reinstall and i was wondering i got install files on D: ready and on C: i still got 7100 RC i want to install it on same drive if im not wrong old windows will be moved to folder windows.old right? so later i just delete windows.old and it will be fine right?
In earlier windows i could enter dos and click on setup exe and install from hd why its no longer possible
I just installed Win 7 on an old Compaq pc that had been running XP. The computer has two 160GB hard drives on it. When going through the installation process I formatted both drives and deleted any partitions that I found. There were more partitions than I expected but I deleted them all. Win 7 installed perfectly and is working fine except that the 2nd drive isn't showing up. After searching a bit online it seems a 100MB partition is created during installation. By deleting the partitions I may have caused the setup to use the entire 2nd drive for whatever is in that 100MB partition and now I can't access the drive from Windows.
Does any of this make sense? From what I have read it sounds like I may have to reinstall but I'd like a second opinion before I go do something like that.
I'm installing a fresh copy of Windows 7 Ultimate on an Asus UL80J. When asking where I want to install windows, I get "No drives were found. Click to load a driver". The drive is new, has no problems, and is detected in the BIOS fine. Also, my Windows XP CD detects the drive just fine. I've tried both options in the BIOS for setting SATA to IDE and AHCI. I assume I'm missing a SATA driver needed at installation time, but I can't find one online or from the manufacturer.
View 8 Replies View Relatedi updated this post. look above it to find the other one.
View 1 Replies View Relatedi have an hp pavilion slimline. (model: s5213w) i am upgrading my hard drive but my power supply is limited to having just one hard drive installed at a time. when i put the new one in i ran the disks given to me by HP. the first half of the installation works fine (the part where im putting all the diff cd's in) then it says to remove all cd's and windows will automatically start installing the software. (it may take up to 3 hours). then a black screen comes on. kinda like comand prompt and the cursor line just flashes. three hours later. same deal. any help on this issue? its SATA btw.. idk if that makes a difference.What im trying to install is windows 7 on a Brand New WD5000AAKX (western digital) hard drive. ive used these cds before on my previous hard drive (which came with widows 7 on them from HP) and they worked fine to re install windows 7. The paper that came with the cds from HP say to use them when you want to "upgrade to a new hard disk drive"do i have to create a partition inside it or something? i jsut put the blank hard drive in because i dont have the power supply hookup for 2...
View 1 Replies View RelatedI have a laptop which has a ATA HDD and I tried to install Windows 7 on it, but when you come to the window for choosing a partition, nothing shows up. I have tried to upload new drivers for the chipset on the motherboard from intel (Intel 865 Chipset) but no luck still it doesn't do anything. I am able to find the drivers and I guess it installs them but in the end nothing. So my second attempt was to try and bypass this. I took another laptop and pluged in the hdd there and tried the installation, everything went smooth, when the first restart was prompted I took out the HDD and plugged it in my comp. Now windows starts up but only up to the logo and than restarts, over and over. I tried to install all over again but it still doesn't recognize the HDD on my laptop.
View 9 Replies View RelatedI get to the part of the installation where you select a partition/drive, and there is nothing there. I have tried using different two different HDD both spin up but the installation doesn't see them. I have also switched out SATA Cables, used different power connectors, even tried loading drivers, and have reset the BIOS by removing the CMOS Battery.
Specs:
GIGABYTE GA-Z68AP-D3 Intel Z68 Motherboard
Intel Core i5-2500 Processor
4x 1GB DDR3
Radeon 4870 Graphics Card
530 watt Power Supply
Seagate 320GB 7200 RPM SATA HDD ( tried to install first, no luck moved to the other HDD. Only one at a time connected. )
Maxtor 500GB 7200 RPM SATA HDD
No Disc Drive Atm Installing from Flash Drive?
i have a new samsung laptop running windows 7 64bit.when i first set it up the 1tb hard drive partitioned. that was ok, everything worked fine. a couple of days later i couldn't start windows, no idea why. as it was new and not a lot of files on it yet i reset it to when i first recieved it. now the hard drive shows 2 partitions ,one of 360gb and one of 54mb.
View 2 Replies View Relatedim Having a little problem here has u can see my C:/ HD is 298 gig as show in the device manager but wend i go to the proterties of the HD it only show 114 of space i mean im missing out on a bunch of space.
View 0 Replies View Relatedmy computer is telling me that my spare harddrive has less memory than there should be. the hdd is an old 160gb drive, which in reality has 149gb. after filling up the drive with 70gb of backup, it shows that i have 35 gb left. so where did the other 45 gb go? i highlighted all the files with CRTL+A, but it still only showed 70gb.
View 9 Replies View RelatedI have windows 7 and have 2 internal hard drives, the main hard drive is C, the second hard drive for storage was partioned into 2 drives, letters D and G, drive G is not visible anymore and when i go to disk management on drive D is visible how do i get drive G back as i had data on that drive
View 1 Replies View RelatedI bought a new custom PC from ebay, a shop called FreshTech Solutions, so when it arrived I tried installing Windows 7 Home Premium (came with it). Obviously I need to do a custom install, as I'm not upgrading from anything, but when I get to the screen where it asks where I would like to install Windows 7, nothing is listed. I've tried loading from the disc that came with the motherboard, the Windows 7 CD itself, even the C drive (said it needed to format it, but couldn't).
View 4 Replies View RelatedInstall everything, the bios detect the hard drive (it's a new hard drive, never been use) but when installing the Windows 7 64, the hard drive list is empty.
Here my spec
Phenom II 940BE | Gigabyte 790X-UD4P | Seagate Barracuda 7200.12 500GB | XFX HD4770 512MB | OCZ StealthXStream 600W | NZXT Tempest
i was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies View RelatedI bought a laptop asus K55VM, and switch the optical drive for a SSD. Both drives are format and active since what a want is a clean install.
During the instillation both drives don't show up, i tried to load drivers from intel but nothing shows up. The Bios shows both drivers, i change from AHCI to IDE but no effect.
Just bought a new hard drive due to my old one was failing. This is the same exact hard drive I had.Whenever I try installing windows 7, it "completes", then the screen blinks skips, and skips the "Create a user account" and just hangs at "Completing Installation". I thought I would give it a try and disable my gfx driver just to see if that would work.
View 9 Replies View RelatedBefore upgrading from XP to 7, I made backup on 2 external drives. I tested both backup, and they tested fine.
I then reformated my laptops hard drive & installed Windows 7. No problems were reported.
However I could not access the data on the 2 external hard drives. Windows 7 reported that they were unreadable and that I needed to reformat them!
The 2 hard drives were connected to my laptop when I installed Windows 7
I had to take both too a comuter geek who spent 2 days recovering my data - at a huge cost to me.
'installation directory must be on a local hard drive' Its not the msi as ive tested it on another computer.The msi is a plugin tool called t-splines by autodesk. Ive also tried older versions with the same error Things i've tried so far
sys restore
safe mode
right click - take ownership
I uninstalled 7zip which i already had, then reinstalled with the .msi from the website to test if it was all msi, however it actually worked I was looking around for other .msi install software just to test it but can't find any?
