When I plug it in, driver installation starts but fails. I can locate the device in the Device Manager, should I be manually installing a driver in this case? If so, I'd like to have a driver.
View 1 RepliesI recently received a virus that did a plethora of things and one of them was trying to delete system 32. To counter this I tried to reset my comp to a previous date. After pushing it to the farthest date and still dealing it I decided to reset to factory default without backing up any files. Everything goes great but when it starts installing the service and the OS it says the installation can not continue and the comp must be restarted. My comp is a HP TouchSmart 600 PC running Windows 7 Premium 64-bit. I have disconnected everything from it and tried running it on safe mode but I do not know how to restart it without pressing the power button but that just ends everything.
View 1 Replies View RelatedI got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional
View 4 Replies View RelatedI have windows 7 ultimate x64 and I have been trying to install microsoft .NET Framework 4. However, every time I try, it always fails. It gets about halfway through the installation and a window pops up asking for me to open the location of an .msi that is not there. It's not in the setup fies and its not in the location that is given.Here is a screen cap of the installation and the window that pops up asking for the .msi file.
View 4 Replies View RelatedI have just had a new 1Tb hdd fitted by a shop after my original failed but since he fitted it it keeps crashing ior corrupting Is it possible to reload the Win 7 Home premium to a clean start as I can'tr get it to load
View 3 Replies View RelatedI get this error whenever I try to install Maya 2013 any ideas?
Code: 2012/10/27:01:39:30[private][private]=== Setup started on [private] by [private]===
2012/10/27:01:39:30[private][private]Launch
2012/10/27:01:39:30[private][private]CommandLine/url "http://studentsdownload.autodesk.com/SWDLDDLM/2013/MAYA/WI/Autodesk_Maya_2013_English_Japanese_SimplifiedChinese_Win_en-US_Setup1.exe" /SN 900-34219145 /PK 657E1 /student /skipEULA /akamai /auth /sid
[code]....
Can't install Windows 7 from original DVD , I formatted the HDD twice and still, same error. The installation stops after 10-15 min with this error code 0x80070017 I know the media is in great condition, so exclude this problem. Maybe HDD failure ? I did the format and wipe via usb with MiniTool partition wizard .
View 4 Replies View RelatedMy new asus p8z68-pro mobo runs everything just fine in the bios -- it detects all the relevant drives, my USB peripherals are working, etc. When I try to install Windows, however, I run into a problem. As soon as the installation files load off of the DVD and the installation begins my USB devices shut down. This means, of course, no keyboard or mouse to proceed with the install, so I'm stuck.I checked in the bios -- both the usb legacy support and the usb 3.0 legacy support are turned on. I have tried this with the EHCI hand-off both on and off. Either way, I run into the same problem. I've even swapped out my fancier mouse and keyboard for simpler models to see if it was some sort of driver issue, but nothing seems to make a difference.
View 2 Replies View RelatedI installed window 7 that time show massage reboot and select proper boot device and top media failure checked cable
View 2 Replies View RelatedI get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies View RelatedSpecs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
I am unable to get my Epson Stylus Photo R240 installed on Windows7 - has anyone got an answer to this please?
View 1 Replies View Relatedi'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?
View 2 Replies View Related"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?
View 3 Replies View RelatedYesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.
View 2 Replies View RelatedCan I use 2gb of ram KINGSTONE with 4gb of ram ZION ? I m using Windows 7 32 bits GIGABYTE motherboard DDR3.
View 1 Replies View RelatedI am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be alright as well (if not, it can be upgraded at later stage).
View 9 Replies View RelatedKingston sd card is locked
View 2 Replies View RelatedI have a Kingston flash drive 8gb usb 2.0 just like this one:[code]....
but for some reason it's not working on my pc/laptop/ps3 and any other computer I tried it on.
when I plug in the flash drive I don't get any detected sound on my windows and it's not there on my computer either, just like as if it wasn't plugged in at all, I tried using different usb ports and it's the same, I'm guessing it's a hardware problem with the flash drive itself not software at all.
I don't care about the flash itself but the files inside the flash are really important to me I just need to copy them on my PC and that's it.
i have a kingston flash 8gp >> i need to convert it to NTFS But I Can't >>can't convert rwa driver
View 1 Replies View RelatedPen Drive is not showing into the computer, how can I solve this?
View 1 Replies View Relatedmy new flash drive is not formatting. but does show full in properties
View 2 Replies View RelatedHow to remove write protection a Kingston 102 4 GB
View 1 Replies View RelatedAdvertised to run 1.65v 9-9-9-27 at 1600 MHz. I've tried bumping up voltage and QPI to no avail. Will run at 1600 MHz for usually less than an hour before the computer shuts off. No BSOD, no errors, just shuts off.
View 2 Replies View RelatedI have a Kingston/Ricoh SD card (8 GB). When I eject it via "safely remove hardware" tray icon and then insert it to another laptop, it always warns to scan for errors but after scanning there is always no problem found. Why do I always get this scary warning? A USB key (also 8 GB) does not do this.
View 2 Replies View RelatedI decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
My pen drive (Kingston DT 101 G2 16GB) is showing write protected...I tried to format it but showed write protected message..
View 2 Replies View Relatedhow to remove the write protection from the kingston 4GB USB flash?
View 2 Replies View RelatedKingston Technology is instructing customers to return certain models of its memory sticks, after the firm discovered a glitch in its DataTraveler Secure flash drives.
The company said in a security notice that the models affected were “privacy” editions of the DataTraveler Secure, DataTraveler Elite and DataTraveler Blackbox.
Kingston said the security flaw could allow a wrongdoer to hack into the memory sticks. “A skilled person with the proper tools and physical access to the drives may be able to gain unauthorized access to data,” warned the vendor.
Kingston added that a number of its USB drives were not affected by the security flaw.
Customers whose drives could be exploited by the security loophole should return the product, where Kingston said it would apply a factory update.
Kingston had claimed that its Data Traveler Secure drive was the first of its kind to protect “100 percent of data on-the-fly via 256-bit hardware-based AES encryption.”
Source:Kingston coughs to security flaw in 'Secure' flash drive ?
kingston 16 gb pen drive detected but not showing files and folder, not formated.
View 1 Replies View RelatedI want to hack my Nintendo Wii. But when I try to format my SDHC Card, it says it is write protected.
View 4 Replies View Related