I am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be alright as well (if not, it can be upgraded at later stage).
View 9 Replies
I decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
Can 32gb ssd drive @ 4gb ddr3 will support the desktop with 2gb ddr3 & 200gb
View 3 Replies View RelatedIs DDr3 PC3 10666 ram any faster or slower than DDr3 PC3 19600 ram? Are they interchangeable?
View 7 Replies View RelatedI think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?
View 9 Replies View Relatedddr 3 is much cheaper
View 1 Replies View RelatedCan I use 2gb of ram KINGSTONE with 4gb of ram ZION ? I m using Windows 7 32 bits GIGABYTE motherboard DDR3.
View 1 Replies View RelatedOkay so i have a Quad core x6850 Intel CPU, EVGA 280GTX GPU CARD.
Now i installed window 7 x86 bit version ULTIMATE. And i have 6GB DDR3 RAM INSTALLED INTO MY geforce Nforce 790i motherboard. Now the problem is that in Windows 7 it shows "Installed Memory: 6.00GB (2.75 GB Useable)". But in Bios it shows me that 6gigs in installed.
Now does that mean it is WIN 7 that is just reading my DDR3 RAM WRONG? But i am still getting the full performance for all of my 6GB DDR 3 RAM? Since my bios is reading all of the 6GB RAM?
Also i tried doing what other forums indiated i should be doing like type config and check mark or uncheck mark MAX MEMORY. Tried doing that, but noting happened.
Now the only thats left and i am having confusion with is, some people are saying i should Enable Memory remapping in bios? I have a nforce 790i motherboard, and i can't find that exactly in my bios mode. Is there any other way to fix this problem?
When I attempted to turn it back on after having to cut the power, it wouldn't boot up at all.
After resetting the motherboard by taking out the battery, it did get into windows, I ran a startup repair, it got to a while in, then BSOD'ed. Eventually I managed to pin it down to the memory. I have 2x4GB and 2x2GB.
The PC boots up perfectly when only either of these is in, so it doesn't seem to be a problem with either of these sets.
When both are inserted, I get a blue screen when trying to boot up which points to a dll file in system32. Unfortunately I haven't noted the name down yet.
i have update memory ddr3 2GB to 4Gb.
View 3 Replies View RelatedKingston sd card is locked
View 2 Replies View RelatedJust wondering if there is a physical difference between a DDR2 and a DDR3?
View 9 Replies View Relatedcan i use DDR3 for acer aspire 5050?
View 1 Replies View RelatedI have a Kingston flash drive 8gb usb 2.0 just like this one:[code]....
but for some reason it's not working on my pc/laptop/ps3 and any other computer I tried it on.
when I plug in the flash drive I don't get any detected sound on my windows and it's not there on my computer either, just like as if it wasn't plugged in at all, I tried using different usb ports and it's the same, I'm guessing it's a hardware problem with the flash drive itself not software at all.
I don't care about the flash itself but the files inside the flash are really important to me I just need to copy them on my PC and that's it.
i have a kingston flash 8gp >> i need to convert it to NTFS But I Can't >>can't convert rwa driver
View 1 Replies View RelatedWhen I plug it in, driver installation starts but fails. I can locate the device in the Device Manager, should I be manually installing a driver in this case? If so, I'd like to have a driver.
View 1 Replies View RelatedPen Drive is not showing into the computer, how can I solve this?
View 1 Replies View Relatedmy new flash drive is not formatting. but does show full in properties
View 2 Replies View RelatedHow to remove write protection a Kingston 102 4 GB
View 1 Replies View RelatedI have a nvidia 9600GSO 384mb ddr3, i would like to upgrade it, Could any suggest a nice GPU that would fit into my system and won't require a PSU upgrade? I know this one is a little old, but it sure is a lot better than my present GPU, nvidia 9800GT gold edition.
View 4 Replies View RelatedI have a DX58SO mobo from Intel with i7 processor. There are 4 channels for memory and 3 of them (all blue) are filled with 2GB DDDR3 DIMMS. (total 6 GB)[CODE]Do I have a problem or not? Why is this telling me I only have a "total" of 2047 MB, but 6144 MB installed? Does Win 7 use all channels in parallel, 2GB at a time? Or do I have 6GB x64 bits wide?My Microsoft performance index is low (5.5) on the memory test, the only bottleneck in my system.
View 5 Replies View RelatedAdvertised to run 1.65v 9-9-9-27 at 1600 MHz. I've tried bumping up voltage and QPI to no avail. Will run at 1600 MHz for usually less than an hour before the computer shuts off. No BSOD, no errors, just shuts off.
View 2 Replies View RelatedI have a Kingston/Ricoh SD card (8 GB). When I eject it via "safely remove hardware" tray icon and then insert it to another laptop, it always warns to scan for errors but after scanning there is always no problem found. Why do I always get this scary warning? A USB key (also 8 GB) does not do this.
View 2 Replies View RelatedMy pen drive (Kingston DT 101 G2 16GB) is showing write protected...I tried to format it but showed write protected message..
View 2 Replies View Relatedhow to remove the write protection from the kingston 4GB USB flash?
View 2 Replies View RelatedNeed to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?
View 3 Replies View Relatedputting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.
View 9 Replies View RelatedKingston Technology is instructing customers to return certain models of its memory sticks, after the firm discovered a glitch in its DataTraveler Secure flash drives.
The company said in a security notice that the models affected were “privacy” editions of the DataTraveler Secure, DataTraveler Elite and DataTraveler Blackbox.
Kingston said the security flaw could allow a wrongdoer to hack into the memory sticks. “A skilled person with the proper tools and physical access to the drives may be able to gain unauthorized access to data,” warned the vendor.
Kingston added that a number of its USB drives were not affected by the security flaw.
Customers whose drives could be exploited by the security loophole should return the product, where Kingston said it would apply a factory update.
Kingston had claimed that its Data Traveler Secure drive was the first of its kind to protect “100 percent of data on-the-fly via 256-bit hardware-based AES encryption.”
Source:Kingston coughs to security flaw in 'Secure' flash drive ?
Does GTS 450 1gb DDR3 works well with DualCore Intel Pentium D 805, 2666 MHz (20 x 133) ?....I got 2 Gb RAM(800 MHz)...and my motherboard is XFX MG-63MI-7109 Motherboard ....
View 7 Replies View Relatedkingston 16 gb pen drive detected but not showing files and folder, not formated.
View 1 Replies View RelatedI want to hack my Nintendo Wii. But when I try to format my SDHC Card, it says it is write protected.
View 4 Replies View Related
