Update Memory Ddr3 2GB To 4GB?

Mar 3, 2012

i have update memory ddr3 2GB to 4Gb.

View 3 Replies


ADVERTISEMENT

Use Dd3 Memory In Ddr3?

Feb 2, 2013

ddr 3 is much cheaper

View 1 Replies View Related

Ddr3 Memory Usage Windows 7 Explanation?

Jun 16, 2011

I have a DX58SO mobo from Intel with i7 processor. There are 4 channels for memory and 3 of them (all blue) are filled with 2GB DDDR3 DIMMS. (total 6 GB)[CODE]Do I have a problem or not? Why is this telling me I only have a "total" of 2047 MB, but 6144 MB installed? Does Win 7 use all channels in parallel, 2GB at a time? Or do I have 6GB x64 bits wide?My Microsoft performance index is low (5.5) on the memory test, the only bottleneck in my system.

View 5 Replies View Related

Can 32gb Ssd Drive @ 4gb Ddr3 Will Support The Desktop With 2gb Ddr3 & 200gb

Sep 4, 2012

Can 32gb ssd drive @ 4gb ddr3 will support the desktop with 2gb ddr3 & 200gb

View 3 Replies View Related

Is Ddr3 Pc3 10666 Ram Faster Than Ddr3 Pc3 10600 Ram

Sep 11, 2011

Is DDr3 PC3 10666 ram any faster or slower than DDr3 PC3 19600 ram? Are they interchangeable?

View 7 Replies View Related

If My RAM Is DDR3 Can I Only Upgrade To DDR3?

Jan 31, 2013

I think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?

View 9 Replies View Related

6GB DDR3 Ram Installed BUT Only 2.75 USABLE

Dec 9, 2009

Okay so i have a Quad core x6850 Intel CPU, EVGA 280GTX GPU CARD.

Now i installed window 7 x86 bit version ULTIMATE. And i have 6GB DDR3 RAM INSTALLED INTO MY geforce Nforce 790i motherboard. Now the problem is that in Windows 7 it shows "Installed Memory: 6.00GB (2.75 GB Useable)". But in Bios it shows me that 6gigs in installed.

Now does that mean it is WIN 7 that is just reading my DDR3 RAM WRONG? But i am still getting the full performance for all of my 6GB DDR 3 RAM? Since my bios is reading all of the 6GB RAM?

Also i tried doing what other forums indiated i should be doing like type config and check mark or uncheck mark MAX MEMORY. Tried doing that, but noting happened.

Now the only thats left and i am having confusion with is, some people are saying i should Enable Memory remapping in bios? I have a nforce 790i motherboard, and i can't find that exactly in my bios mode. Is there any other way to fix this problem?

View 9 Replies View Related

Kingston HyperX DDR3

Nov 29, 2011

I am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be alright as well (if not, it can be upgraded at later stage).

View 9 Replies View Related

Won't Boot Up With 2 Sets Of DDR3 I7

Nov 20, 2011

When I attempted to turn it back on after having to cut the power, it wouldn't boot up at all.

After resetting the motherboard by taking out the battery, it did get into windows, I ran a startup repair, it got to a while in, then BSOD'ed. Eventually I managed to pin it down to the memory. I have 2x4GB and 2x2GB.

The PC boots up perfectly when only either of these is in, so it doesn't seem to be a problem with either of these sets.

When both are inserted, I get a blue screen when trying to boot up which points to a dll file in system32. Unfortunately I haven't noted the name down yet.

View 1 Replies View Related

Physical Difference Between A DDR2 And A DDR3?

Apr 14, 2011

Just wondering if there is a physical difference between a DDR2 and a DDR3?

View 9 Replies View Related

Can Use DDR3 For Acer Aspire 5050

Jun 20, 2012

can i use DDR3 for acer aspire 5050?

View 1 Replies View Related

How To Upgrade Nvidia 9600GSO 384mb Ddr3

Aug 26, 2011

I have a nvidia 9600GSO 384mb ddr3, i would like to upgrade it, Could any suggest a nice GPU that would fit into my system and won't require a PSU upgrade? I know this one is a little old, but it sure is a lot better than my present GPU, nvidia 9800GT gold edition.

View 4 Replies View Related

New Kingston DDR3 1333 Running At Only 800 Bus Speed

Jul 29, 2012

I decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one

This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?

Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G

View 4 Replies View Related

Making DDR3 2400 Stable - BIOS Setup?

Apr 29, 2012

Need to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?

View 3 Replies View Related

Power Supply Unit - How Many Watts For 8GB Ddr3 1333 ?

Oct 4, 2012

putting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.

View 9 Replies View Related

Does GTS 450 1gb DDR3 Works Well With Dual-core Intel Pentium D 805, 2666 MHz

Dec 11, 2011

Does GTS 450 1gb DDR3 works well with DualCore Intel Pentium D 805, 2666 MHz (20 x 133) ?....I got 2 Gb RAM(800 MHz)...and my motherboard is XFX MG-63MI-7109 Motherboard ....

View 7 Replies View Related

What Graphic Card Is Suitable For Pentium 4, 3.0 Ghz, Ddr3 2gb Ram, Operating System Is Window

Oct 23, 2012

What graphic card is suitable for pentium 4, 3.0 ghz, ddr3 2gb ram, operating system is window

View 4 Replies View Related

Dual Monitor - GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE

Jun 4, 2009

I was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.

My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.

View 9 Replies View Related

Convert A Shared Video Memory Into Dedicated Video Memory And System Video Memory?

Aug 12, 2011

how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?

View 1 Replies View Related

Troubleshooting Excessive Memory Use (Memory Leak) After Playing Video

Oct 6, 2012

i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.

machine: dell xps studio 8100
os: win 7,
processor: i7 2.8
ram: 16gb (max it will take)
video: ati radeon 5700 (running 3 monitors)

versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)

browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.

normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).

View 2 Replies View Related

Chkdsk High Memory Usage / Memory Leak?

Jun 1, 2009

I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).

View 9 Replies View Related

Memory Usage Goes Up Gradually (Memory Leak)

May 22, 2010

Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...

my system :
------------------------
OS : Windows 7 x86
Cpu : Intel P4 3.0GH
Vga : nVidia 6600
MB : Gigabyte GA-8I915G Duo
PSU : Corsair 750W
RAM : 2GB DDR-400 Transcend
(I have these memories for 2 years)
Physical Memory: 2000 mb
Paging File: 2000 mb
Virtual Memory: 6000 mb

0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)

1- Scanning my computer with antivirus and antispywares

2- Changing antivirus software

3- Updating windows with all updates available via Windows Update

4- Updating drivers of all hardwares

5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2

View 7 Replies View Related

Increased Memory Usage With Added Memory?

Nov 5, 2011

I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.

I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.

Computer specs:
Windows 7 HP 64-bit
gSkill 16gb 1866 memory (BIOS shows it at 1866, too)
Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets)
ASRock z68 Extreme4 mobo

View 9 Replies View Related

Memory Says It Has 3.0 GB Of Ram And Runs Until Start Actually Using To New Memory?

Feb 28, 2012

I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.

View 6 Replies View Related

Windows 7 Explorer.exe Running At Total Memory After A Few Minutes "memory Leak"

Oct 28, 2012

To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.

View 12 Replies View Related

Windows Update Error / Not Search Or Update / Install Critical Items

Jan 30, 2011

I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.

View 1 Replies View Related

Optional Update In Windows Update Is Giving A Blue Screen

Nov 3, 2012

The update is called:

nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.

After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.

View 1 Replies View Related

Auto-update Property Sheet Extension File Update

Oct 12, 2011

Is this file safe to have operating on my computer???

View 2 Replies View Related

Unable To Update Using Windows 7 Update (Code 8000FFFF Error)?

Oct 30, 2012

A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.

Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.

View 8 Replies View Related

"Out Of Memory" Error, All Apps Continually Increase Memory Usage

Sep 20, 2011

I have windows 7 64 bit and also running a ssd. Just a few days ago I've started to have an issue where after my computer is running for a couple hours all processes continually increase the amount of memory they are using until I get an out of memory error. Here is a pic of it around 75%. I have 8 gigs of ram (kingston) that before this never went above 4gigs of use, so not sure what is causing this suddenly.

View 9 Replies View Related

Kodak - Camera Says Memory Card Is Protected (reset Switch On Memory Card) ?

Nov 5, 2011

my camara says memory card is protected (reset switch on memory card) how do you do this the camara wont take photos untill this is dun

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved