putting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.
View 9 Replies
I decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
A standby machine that I have is having trouble starting. When first turned on, it will attempt a start, drive lights fans etc come on then within 3 seconds, go out and repeat. This does this for about 5-6 iterations and then starts normal and will run until turned off. This system has one HDD, one DVD drive, MB graphics, so I don't think there is much of a load.
View 9 Replies View Relatedcan you run a GTX 670 on a 650W power supply?
View 6 Replies View RelatedMy original problem, i am sure is my power suplly, I have just upgraded to the cross hair V main board. My computer has been restarting randomly during intensive game play. it didn't do this before my upgrade. Secondly as i have said above i currently have a 500w PSU. I am thinking of upgrading to the antec High Current Gamer 750 watt. I have filled in the system specs. do you think it will run my computer perfectly. also i will be getting 16GB DDR3 1600MHz RAM and an ATI 6970 will the antec PSU be enough?
View 8 Replies View Relatedi just bought a new gpu (Nvidia Gefore Gt 440) but it reccomends more than 400 watts, i only have 240 watts. Due to this, games lag on my new gpu. Can i overclock my power supply so i dont have to buy a new one?
View 5 Replies View RelatedI'm having some strange problems with my PSU. My computer went black last night while I was playing GTA IV. After some research on the web, I came to a conclusion that my PSU died. I attempted the paperclip trick with no success - fans didnt do anything. I was about ready to start shopping for a new one, plugged everything back into places, when I saw a red 115V/230V switch on the back. I switched it from default 115V to 230V and tried the paperclip test again. This time the fan on the back of the case (not PSU) started spinning, and lights on the front and the green light on CD-ROM lit up. I plugged the 24 pin connector back into the motherboard, and hit the on switch (still with 230V), and the same thing happened.From what I described above, what do you think has gone wrong with my PC? And why is PSU acting the way it is?
View 9 Replies View RelatedWhich power supply is better for gaming? CHIEFTEC 750W PSU, 85+,230V W/CABLE MNG ( CTG-750C ) Or OCZ ZT Series 750W fully Modular 80 Plus Bronze, ATX12V v2.2 Active PFC ( OCZ-ZT750W-EU )In future i might Sli/crossfire.
View 5 Replies View RelatedI replaced my power supply and now I get a 0x80070035 error when trying to map my network storage server. I've had this mapped for over a year, and usually just need to enter the password to re-connect after a re-boot. I've tried disabling the firewall, anti-virus, file and printer sharing, etc. I looked for the extra network entries that others have said to delete, but I don't have any.
This computer is running Windows 7 Professional 64 bit. The network storage server is running Windows 7 Professional 32 bit. From the 32 bit machine the 64 bit machine shows up, even in explorer.
From the 64 bit machine the 32 bit does not show up except under the Network and sharing center, selecting "see full map" shows both machines.
I can't see how changing a power supply could cause a problem. I tried going back to a restore point from last week in case a "windows update" caused the problem, which did not show up until the latest re-boot, but that did not help either.
Right I have a 550ti but only a 300w power supply. My performance is shocking on it. Is this cause my power supply? It's recommended to have a 400w +. Also my processor is only at like 70-80% use.
View 9 Replies View RelatedI am starting to think I may have a power supply issue and none of the programs I use seem to monitor it correctly or the power supply is bad. I have been using TOverclocker (came with my Biostar MB), Speccy, Everest, HWinfo64, HWinfo32 and SpeedFan. None of these give me consistent measurements or measure the voltages wrong from opening the program. Is there a monitor program out there that is very good at measuring power supply voltages. My MB is a Biostar TZ68A+.
View 9 Replies View RelatedI've got a gateway model computer I want to upgrade, but I need a 400W power supply for the card I'm buying, should I be worried about a new power supply being incompatible for any reasons with my computer?
View 3 Replies View RelatedThrough a clean install I switched to Windows 7 last week. Today being the 6th day since I switched, the computer has frozen 4 times. Of the 4 times, one was just a sudden power down without a proper shutdown.
Through event viewer, the log suggested an error dealing with power supply.
Since I've noticed that multiple PCs on different processors are seeing the same error, I would like to know if there have been any fixes released for this yet.
Anybody solve this yet?
I installed the graphics card but it needs 6 pin PCI-E auxiliary power connector, my power supply is DELL J102N PS-5361-2 360 Watt Power Supply XPS 435MT and it doesn't have this 6 pins, when i start my computer it's just giving me 6 beeps which means Video card failure. What should i do?
picture of my cpu: [URL]
Power supply Novatech 800W ATX Power Supply for AMD and Intel Motherboards 20Pin + 4Pin | NOV-PSU800
Graphics card Gigabyte GeForce GTX 580 SOC 1536MB GDDR5 PCI-Express Graphics Card - Aria Technology
My brother needs a video card but me being the smart one here. I got his info from dxdiag and I need a recommendation for two things , a video card and power supply. His current power supply runs at a max of 250w and it seems low, mine being 500w so its the right thing to upgrade in order to get a video card. keep video card recommendations "single slot" only since I have no idea how to hook up a video card to a power supply. Single slot ones are simple.
System: Windows 7 Home Premium 64 bit
Manufacturer : Hewlett-Packard
Processor: AMD Athlon(tm) II X4 640 Processor
Memory: 4096MB RAM
OS Memory: 3840MB RAM
Power Supply : 250W Max
Here is my current build:
[code]....
Ever since I changed my power supply from an Orion 480W to my current Cooler Master power supply, my pc will not sleep. It initiates sleep but then immediately turns back on and boots to the login screen. I have tried everything! From powercfg in cmd to changing the seetings on the motherboard in bios, and disabling all hardware from waking my system up to changing the power supply settings in windows. I am considering doing a reinstall of windows
recommendations for compatible power supply & graphic card upgrades. My current model is EL1352-03 (specs from Newegg below):[URL]Is it realistic to upgrade this model due to the motherboard case & available slots?
View 1 Replies View RelatedIf the computer is shut down and disconnected from the power supply for about 5 hours or longer I get a bluescreen right after the windows boot screen. Otherwise it starts without problems and works fine. My workaround for the problem after long shut down is to switch on the power supply, then immediately switch it off and then on again. This works always fine!
My System:
Windows 7 Home Premium 64bit SP1
AMD Phenom II X6 1090T Black Edition Asus M4A89GTD PRO/USB3 4GB (2x2) 1333-777 RAM ATI Radeon HD 5570
Blue Screen: *** STOP: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
I already used all of the windows debugging, diagnostic tools and Memtest but without success.
it freeze totally at random, i cant move my mouse or do anything.
View 9 Replies View RelatedMy computer keeps shutting itself down with the following error message:
"Power surges detected during the previous power on. ASUS anti-surge was triggered to protect the system from unstable power.......(see below for photo of screen).
So I bought a UPS in the hopes of controlling the flow of power to my computer. Unfortunately that didn't work so I assumed that the power supply unit must be broken. I have replaced it and I am still getting the crash/error. So I simply disabled the feature on teh motherboard that controls anti-surge protection and now my computer simply crashes and powers down.
I have checked the event logs and noticed this being logged right before the crash every time:
"File System Filter 'aswSnx' (6.0, 2012-03-07T01:04:05.000000000Z) has successfully loaded and registered with Filter Manager."
dxdiag:
------------------
System Information
------------------
Time of this report: 5/23/2012, 20:17:39
Machine name: ENDUSER-PC
[Code].....
My desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
I keep getting BSODs .I tried many things but doesnt solved my problem.I dont know how to open the minidump files.All i can do is use WhoCrased or BlueScreeView.But i heared they are not showing all and i must take a look in minidumps.How do i open the .dmp files?
Crash Dump Analysis
--------------------------------------------------------------------------------
Crash dump directory: C:WindowsMinidump
Crash dumps are enabled on your computer.
On Sun 26.08.2012 07:29:29 GMT your computer crashed
crash dump file: C:WindowsMinidump�82612-18828-01.dmp
[code]....
What should be the minimum power supply for an intel i5 2500k and a sapphire radeon 6770? Right now I'm running a Corsair 600x power supply.
View 3 Replies View RelatedCan 32gb ssd drive @ 4gb ddr3 will support the desktop with 2gb ddr3 & 200gb
View 3 Replies View RelatedI installed a power supply and removed the floppy disk from a Dell Optiplex GX520. Now when I turn it on, it says there is no serial ATA SATA-2 nor parallel ATA, Path=0 (Pri Master.) Everything is working so I don't know what the problem is.
View 2 Replies View RelatedIs DDr3 PC3 10666 ram any faster or slower than DDr3 PC3 19600 ram? Are they interchangeable?
View 7 Replies View RelatedI just got a new Geforce 8400gs by galaxy. The card requires about 300watts but I only have 250. What will most likely happen if I use it? will it work?
View 9 Replies View RelatedI think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?
View 9 Replies View Relatedok, sounds like a stupid question, i know, but if i purchase them by ende of tomarrow i get 25% off, and i plan on upgrading mobo soon. i have been generaly informed on another post that 1600 in 1333 should work, it will just operate at 1333 speed, is it the same with 2133?
View 9 Replies View RelatedI had 8 GiB of memory in my HP Pavilion dv7-4110em XE287EA#BED working at 1,066 MHz because one of the 2 4-GiB memory modules had a maximum frequency of 1,066 MHz. Today, I replaced that module with a 4-GiB module which can work at 1,333 MHz. So, now my 8 GiB of memory works at 1,333 MHz. Windows work noticeably faster.
However, the CPU and GPU temperatures now go over 90C and the laptop goes into hibernation. Is there a way to avoid this - somehow slow down the CPU when the temperature is too high, or similar? How can I make the laptop go into standby instead of hibernation when this happens?
