What should be the minimum power supply for an intel i5 2500k and a sapphire radeon 6770? Right now I'm running a Corsair 600x power supply.
View 3 RepliesI installed the graphics card but it needs 6 pin PCI-E auxiliary power connector, my power supply is DELL J102N PS-5361-2 360 Watt Power Supply XPS 435MT and it doesn't have this 6 pins, when i start my computer it's just giving me 6 beeps which means Video card failure. What should i do?
picture of my cpu: [URL]
i have a sapphire HD 5770 a little over a yr now and recently it started giving problems and now it does not wrk most of the time. what happens is that when the computer is turned on the card starts up (the lights on the back of the card light up green and soon after they start to flicker and turn off and the fan spins really fast and loud as if there is no six pin power connector in the card. i gave it to a friend to check it for me and it wrked in his system for about 4 days str8 the started to chip off.
View 3 Replies View Relatedi don't know if the video card and the graphics card is the same thing (because im not from UK or USA). my problem is that i have installed the driver and by the devices appears a yellow sign that shows that i have installed nothing what should i do ? my card is : ati radeon saphire x1550 (if someone didn't understand that what i wrote plz ask me for more explanations)
View 9 Replies View Relatedi installed Windows 7 Professional 32bit on My GPU is compatible with Aero, why I can't use it? I tried to install all windows drivers, but it doesn't work.
View 8 Replies View RelatedI recently looked into this cards performance and even used furmark to benchmark test it. THIS program made the card reach 91c before I stopped it.I recently got MSI Afterburner to test it out even more accurately and it gave me readings of 79c only after maybe 4-5 minutes of play on Metro 2033 with High settings.It just worries me that it may be overheating at times.
View 9 Replies View Relatedyes I have a Sapphire Radeon HD 4850x2 on a Intel Motherboard but I can't find drivers to overdrive my Fan .....?
View 4 Replies View RelatedHad a frustrating afternoon trying to get my triple-monitor setup going again; I had WinXP for years with two video cards: a single, simple VGA / PCI card, and a recent Radeon HD 4670 card with two outputs. Under XP everything was recognized without incident, first repeating all three monitors and then able to extend windows to this monitor under Display Preferences.
Now under Windows 7 RC, I did a fresh install with both cards inserted, and only the single VGA card would drive its monitor. The HD 4670 drivers are listed in the Device Manager, I removed and installed the ATI 9.9 version software several times, and the single VGA output is the only thing I get. I even tried the 'F8', selected the unsigned drivers, and still it didn't bring the Radeon to life.
I pulled the single VGA card out, and bam the two monitors off the Radeon come alive. I install the CCC and it works just fine. And then I shutdown, add the VGA card back, and get the single VGA output again.
My m'board is Gigabyte GA-K8U-939 with Athlon X2 2.6 GHz and 3GB DDR. Windows 7 x64 detected the card but had an yellow symbol with the status code 43. Aero could not be enabled because of that. A poster torrentg seems to have sorted out this particular issue for a lot of people. I tried all his suggestions but the code 43 exists.
View 9 Replies View RelatedI'm currently using xp home edition and I just bought the SAPPHIRE RADEON HD 4650 1G AGP. The current version of my driver is 8.620.0.0. I found out that there was new updates for the driver. When I tried to make them a bug came in my system. I tried manually to locate the files for the update but still didn't work.
Anybody could pls have any clue about that?
Device Manager is showing the Display Adapter as "VirtualBox Graphics Adapter" I want it to recognise my Sapphire Radeon X1650 Graphics Card so that i can install the appropriate ATI Drivers. How can I do this.
On a similar note my on - board Sound Chip has not been identified properly and again i would like to correct this and install the correct drivers.
A standby machine that I have is having trouble starting. When first turned on, it will attempt a start, drive lights fans etc come on then within 3 seconds, go out and repeat. This does this for about 5-6 iterations and then starts normal and will run until turned off. This system has one HDD, one DVD drive, MB graphics, so I don't think there is much of a load.
View 9 Replies View Relatedcan you run a GTX 670 on a 650W power supply?
View 6 Replies View RelatedMy original problem, i am sure is my power suplly, I have just upgraded to the cross hair V main board. My computer has been restarting randomly during intensive game play. it didn't do this before my upgrade. Secondly as i have said above i currently have a 500w PSU. I am thinking of upgrading to the antec High Current Gamer 750 watt. I have filled in the system specs. do you think it will run my computer perfectly. also i will be getting 16GB DDR3 1600MHz RAM and an ATI 6970 will the antec PSU be enough?
View 8 Replies View Relatedi just bought a new gpu (Nvidia Gefore Gt 440) but it reccomends more than 400 watts, i only have 240 watts. Due to this, games lag on my new gpu. Can i overclock my power supply so i dont have to buy a new one?
View 5 Replies View RelatedI'm having some strange problems with my PSU. My computer went black last night while I was playing GTA IV. After some research on the web, I came to a conclusion that my PSU died. I attempted the paperclip trick with no success - fans didnt do anything. I was about ready to start shopping for a new one, plugged everything back into places, when I saw a red 115V/230V switch on the back. I switched it from default 115V to 230V and tried the paperclip test again. This time the fan on the back of the case (not PSU) started spinning, and lights on the front and the green light on CD-ROM lit up. I plugged the 24 pin connector back into the motherboard, and hit the on switch (still with 230V), and the same thing happened.From what I described above, what do you think has gone wrong with my PC? And why is PSU acting the way it is?
View 9 Replies View RelatedWhich power supply is better for gaming? CHIEFTEC 750W PSU, 85+,230V W/CABLE MNG ( CTG-750C ) Or OCZ ZT Series 750W fully Modular 80 Plus Bronze, ATX12V v2.2 Active PFC ( OCZ-ZT750W-EU )In future i might Sli/crossfire.
View 5 Replies View RelatedI replaced my power supply and now I get a 0x80070035 error when trying to map my network storage server. I've had this mapped for over a year, and usually just need to enter the password to re-connect after a re-boot. I've tried disabling the firewall, anti-virus, file and printer sharing, etc. I looked for the extra network entries that others have said to delete, but I don't have any.
This computer is running Windows 7 Professional 64 bit. The network storage server is running Windows 7 Professional 32 bit. From the 32 bit machine the 64 bit machine shows up, even in explorer.
From the 64 bit machine the 32 bit does not show up except under the Network and sharing center, selecting "see full map" shows both machines.
I can't see how changing a power supply could cause a problem. I tried going back to a restore point from last week in case a "windows update" caused the problem, which did not show up until the latest re-boot, but that did not help either.
Right I have a 550ti but only a 300w power supply. My performance is shocking on it. Is this cause my power supply? It's recommended to have a 400w +. Also my processor is only at like 70-80% use.
View 9 Replies View RelatedI am starting to think I may have a power supply issue and none of the programs I use seem to monitor it correctly or the power supply is bad. I have been using TOverclocker (came with my Biostar MB), Speccy, Everest, HWinfo64, HWinfo32 and SpeedFan. None of these give me consistent measurements or measure the voltages wrong from opening the program. Is there a monitor program out there that is very good at measuring power supply voltages. My MB is a Biostar TZ68A+.
View 9 Replies View RelatedI've got a gateway model computer I want to upgrade, but I need a 400W power supply for the card I'm buying, should I be worried about a new power supply being incompatible for any reasons with my computer?
View 3 Replies View RelatedThrough a clean install I switched to Windows 7 last week. Today being the 6th day since I switched, the computer has frozen 4 times. Of the 4 times, one was just a sudden power down without a proper shutdown.
Through event viewer, the log suggested an error dealing with power supply.
Since I've noticed that multiple PCs on different processors are seeing the same error, I would like to know if there have been any fixes released for this yet.
Anybody solve this yet?
Power supply Novatech 800W ATX Power Supply for AMD and Intel Motherboards 20Pin + 4Pin | NOV-PSU800
Graphics card Gigabyte GeForce GTX 580 SOC 1536MB GDDR5 PCI-Express Graphics Card - Aria Technology
My brother needs a video card but me being the smart one here. I got his info from dxdiag and I need a recommendation for two things , a video card and power supply. His current power supply runs at a max of 250w and it seems low, mine being 500w so its the right thing to upgrade in order to get a video card. keep video card recommendations "single slot" only since I have no idea how to hook up a video card to a power supply. Single slot ones are simple.
System: Windows 7 Home Premium 64 bit
Manufacturer : Hewlett-Packard
Processor: AMD Athlon(tm) II X4 640 Processor
Memory: 4096MB RAM
OS Memory: 3840MB RAM
Power Supply : 250W Max
Here is my current build:
[code]....
Ever since I changed my power supply from an Orion 480W to my current Cooler Master power supply, my pc will not sleep. It initiates sleep but then immediately turns back on and boots to the login screen. I have tried everything! From powercfg in cmd to changing the seetings on the motherboard in bios, and disabling all hardware from waking my system up to changing the power supply settings in windows. I am considering doing a reinstall of windows
recommendations for compatible power supply & graphic card upgrades. My current model is EL1352-03 (specs from Newegg below):[URL]Is it realistic to upgrade this model due to the motherboard case & available slots?
View 1 Replies View RelatedIf the computer is shut down and disconnected from the power supply for about 5 hours or longer I get a bluescreen right after the windows boot screen. Otherwise it starts without problems and works fine. My workaround for the problem after long shut down is to switch on the power supply, then immediately switch it off and then on again. This works always fine!
My System:
Windows 7 Home Premium 64bit SP1
AMD Phenom II X6 1090T Black Edition Asus M4A89GTD PRO/USB3 4GB (2x2) 1333-777 RAM ATI Radeon HD 5570
Blue Screen: *** STOP: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
I already used all of the windows debugging, diagnostic tools and Memtest but without success.
it freeze totally at random, i cant move my mouse or do anything.
View 9 Replies View RelatedMy computer keeps shutting itself down with the following error message:
"Power surges detected during the previous power on. ASUS anti-surge was triggered to protect the system from unstable power.......(see below for photo of screen).
So I bought a UPS in the hopes of controlling the flow of power to my computer. Unfortunately that didn't work so I assumed that the power supply unit must be broken. I have replaced it and I am still getting the crash/error. So I simply disabled the feature on teh motherboard that controls anti-surge protection and now my computer simply crashes and powers down.
I have checked the event logs and noticed this being logged right before the crash every time:
"File System Filter 'aswSnx' (6.0, 2012-03-07T01:04:05.000000000Z) has successfully loaded and registered with Filter Manager."
dxdiag:
------------------
System Information
------------------
Time of this report: 5/23/2012, 20:17:39
Machine name: ENDUSER-PC
[Code].....
My desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
putting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.
View 9 Replies View Related