i don't know if the video card and the graphics card is the same thing (because im not from UK or USA). my problem is that i have installed the driver and by the devices appears a yellow sign that shows that i have installed nothing what should i do ? my card is : ati radeon saphire x1550 (if someone didn't understand that what i wrote plz ask me for more explanations)
View 9 Repliesi'm using a Radeon X1550 on Windows 7 build 7137. What are the latest drivers avaiable for this card? Now i'm using the Catalyst 8.1 for Vista, and I can't install the Catalyst 9.3 for Vista.
View 9 Replies View Relatedi have a sapphire HD 5770 a little over a yr now and recently it started giving problems and now it does not wrk most of the time. what happens is that when the computer is turned on the card starts up (the lights on the back of the card light up green and soon after they start to flicker and turn off and the fan spins really fast and loud as if there is no six pin power connector in the card. i gave it to a friend to check it for me and it wrked in his system for about 4 days str8 the started to chip off.
View 3 Replies View Relatedi installed Windows 7 Professional 32bit on My GPU is compatible with Aero, why I can't use it? I tried to install all windows drivers, but it doesn't work.
View 8 Replies View RelatedI recently looked into this cards performance and even used furmark to benchmark test it. THIS program made the card reach 91c before I stopped it.I recently got MSI Afterburner to test it out even more accurately and it gave me readings of 79c only after maybe 4-5 minutes of play on Metro 2033 with High settings.It just worries me that it may be overheating at times.
View 9 Replies View Relatedyes I have a Sapphire Radeon HD 4850x2 on a Intel Motherboard but I can't find drivers to overdrive my Fan .....?
View 4 Replies View RelatedHad a frustrating afternoon trying to get my triple-monitor setup going again; I had WinXP for years with two video cards: a single, simple VGA / PCI card, and a recent Radeon HD 4670 card with two outputs. Under XP everything was recognized without incident, first repeating all three monitors and then able to extend windows to this monitor under Display Preferences.
Now under Windows 7 RC, I did a fresh install with both cards inserted, and only the single VGA card would drive its monitor. The HD 4670 drivers are listed in the Device Manager, I removed and installed the ATI 9.9 version software several times, and the single VGA output is the only thing I get. I even tried the 'F8', selected the unsigned drivers, and still it didn't bring the Radeon to life.
I pulled the single VGA card out, and bam the two monitors off the Radeon come alive. I install the CCC and it works just fine. And then I shutdown, add the VGA card back, and get the single VGA output again.
My m'board is Gigabyte GA-K8U-939 with Athlon X2 2.6 GHz and 3GB DDR. Windows 7 x64 detected the card but had an yellow symbol with the status code 43. Aero could not be enabled because of that. A poster torrentg seems to have sorted out this particular issue for a lot of people. I tried all his suggestions but the code 43 exists.
View 9 Replies View RelatedI'm currently using xp home edition and I just bought the SAPPHIRE RADEON HD 4650 1G AGP. The current version of my driver is 8.620.0.0. I found out that there was new updates for the driver. When I tried to make them a bug came in my system. I tried manually to locate the files for the update but still didn't work.
Anybody could pls have any clue about that?
Device Manager is showing the Display Adapter as "VirtualBox Graphics Adapter" I want it to recognise my Sapphire Radeon X1650 Graphics Card so that i can install the appropriate ATI Drivers. How can I do this.
On a similar note my on - board Sound Chip has not been identified properly and again i would like to correct this and install the correct drivers.
What should be the minimum power supply for an intel i5 2500k and a sapphire radeon 6770? Right now I'm running a Corsair 600x power supply.
View 3 Replies View Relatedi can't know how to install video controller driver in windows 7 i have graphics card Radeon X1550 series.
View 2 Replies View RelatedMy story is simple, I bought a Sapphire HD 3850 512mb DDR3 !AGP! and i want 9.6 catalyst drivers installed NOW!
Well, I had to manually install the drivers first. So make sure your drivers are already extracted to your c: or w/e.
www.otleague.net/stuff/9.6_32_bit_hotfix.zip
This link will take you to my Problem Step Recorded (psr.exe) movie of how I got my drivers from the 9.6 Catalyst.
After I restarted I than installed the CCC from the C:atiSupport9-6_agp-hotfix_vista32_dd_cccSetup.exe. (hotfixs are for AGP cards only) You can use the setup know beacuse it doesn't need to install your drivers And boom I hope it works for you, like it has for me.
It took me close to a week of trail and error to get this answer.
Did anybody know when will be released sapphire's ATi drivers for windows 7.
Because official ATi-AMD drivers for windows 7 don't work on my graphic card witch is HD3650 AGP also drivers for vista don't work it installs only CCC but not the display drivers.
Quote: Originally Posted by torrentg That method should work with the hotfix driver but it also works well for the normal non-hotfix Catalyst driver too, even though the card is AGP. I don't use hotfixes any longer as they haven't been necessary for many months.The only thing I can think of is that you're using the wrong .inf in either the wrong folder or right one. (Or again, could be chipset but I'd try this first.)Download the normal Catalyst 9.9 32 bit for Windows 7 and extract it to C:ATI.Here is the .inf you should use. Download it and copy/paste it directly over the existing one in C:ATISupport9-9_vista32_win7_32..:1-CLICK Web hosting - Easy Filehosting Now install using device manager the same as you did before.
View 1 Replies View RelatedIs Sapphire HD 6850 is Compatible to the B75, H77, Z77 Motherboard? What will i loose inserting a HD 6850 to a PCI 3.0 Slot?
View 2 Replies View RelatedI purchased my new computer on Christmas 2008 due to the sales they had that day. When I first got it, it work perfectly fine without even downloading the drivers. I'm a developer for a game and I use various software needed for graphics editing. I play a 10 year old game (Sony's Infantry) almost everyday on average for 1 to 3 hours a day and my system temps are pretty normal. Around 40-50C temps when playing. I use compressed air every 2 weeks and my case is nice and tidy so there's no dust bunnies or anything of that sort.The problem arose during the month of August 2009. There were no artifacts or blue screens or anything like that. The computer would just suddenly turn off on its own and when I tried to power it on, it did not display a picture. I saw the CPU fans spinning, the HDDs were running, all the cables are connected properly, the video card (sapphire 4850) fan was on and there's 1 beep code.
I asked my friend to borrow his old 8600GT and my computer worked normally. He suggests that my PSU may not be supplying enough juice to the GPU. I thought it might have been the mobo. But my friend is more knowledable than I am. I ended up buying a new PSU. The PSU ended up not solving the problem. Then I buy the same exact card that gave me the problem and a new motherboard and installed the drivers.. that didnt do it either. With basically a brand new computer minus the RAM, I end up with the same results.
Original setup:
Intel Q6600
Sapphire ATI 4850 HD
Asus P5E
Antec 500W
G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800
Antec 500W Continuous SLI Certified CrossFire Ready 80 PLUS Certified
Windows 7 x64
Windows Vista x64
[code]....
tried to follow manual guide for installing agp drivers for my sapphire 4650 agp card,
after changing the CL_91526.inf, and udating via device manager, it tells me the
'standard driver' is the best one to use???
im not too good at computers but i just got a new graphics card for my pc, its a sapphire 6790, today i saw there were new drivers available and when i downloaded it and installed it windows shutdown and then when it started back up everything, icons etc were all large, this is the download i did which a guy on bf3 advised me to do which may not of been the smartest option but anyways
[URL]
Well I do not really know where to start. I've bought myself a new computer and I'm trying to set it up and completing updating stuff.
And Everything goes smooth until the installation of my new Sapphire Radeon Hd 5870 Graphic card.
I'm not any expert in this field and could really need some help, directions or what to look after to make it work.
I'm able to install all except the actual driver. The drivers I'm trying to install is latest from Ati's homepage.
The error message i get is following:
"Driver install: user must be a member of the administrators group"
Error During installation of newest Drivers
I've tried right clicking and Run as Administrator but nothing changed and I still got the same "result" or problem after that.
I've checked in my Administrative Tools -> Computer Management -> Local Users and Groups -> Users
And there I've checked that my User is a member of Administrators.
I've tried starting up a game (Aion to be correct) and got this error:
Error Message Starting up Aion
I've tried to install new drivers by selecting the location off the driver but then windows gave me a message that said following:
"Windows has determined the driver software for your device is up to date"
Picture shows Advanced settings in Screen Resolution
Picture off Advanced Screen Res. Settings
On my Motherboard, Asus Rampage II Extreme, It said that if you were running a single GPU card it should stand at the top Pci-e slot, so it's mounted after the manual.
I don't know if that makes me unable to try the 2nd or 3rd Pci-e slot to test the actual slot or not?
Installed OS (Windows 7 Professional 64-bit)
Installed Chipset drivers.
Ran Windows Update
Installed Graphics Card drivers - newest from website
Reboot - CRASH - have to boot in Safe Mode & restore to earlier version as system will no longer start properly.
Why? What did I do wrong?
Until attempting to install the proper drivers, it would appear the system is using a default VGA adapter, and not seeing as PCI-e? Are there special drivers to install for the PCI-e boards?
I am using windows 7 64 bit on my desktop (motherboard ASUS P5E) ASUS - Motherboards- ASUS P5E And I installed VGA SAPPHIRE HD 3870 (ATI RADEON Technology) 512 MB.This VGA has a converter plug from DVI to HDMI.connected a 3 m HDMI cable from a converter to the Samsung TV.I can see a picture on the TV but no sound?
1- download latest driver from AMD website from the link below : AMD Catalyst
2- Follow the instructions here : How to Set Up Audio on an ATI Radeon HD | [URL] No audio from HDTV when playing audio / video from a computer system
3- Digital Audio (HDMI) option was grayed out (not clickable) as can be seen in the snapshot below :[URL]
I have a Sapphire Radeon HD3850 AGP card in my system but windows will not install the driver from the latest release of the ATI Catalyst driver install. Instead it defaults to the Standard VGA
From what i have read on these forums i may need to change some information the CH87739.inf file for the driver.
I see a memeber called torrentg had posted a modified .inf file but the download limit has been reached. Is there any chance of posting again? Or perhaps positing its contents into the replay.
i have AMD Radeon HD 6670 when i play game then it very slow
View 1 Replies View RelatedI was looking for CCC drivers for my ATI radeon 3100.
One problem: They have drivers for ATI Radeon 3100 HD, But NOT 3100.
Whats the difference between the two?
Is it possible to just use the ATI radeon 3100 HD drivers on my ATi radeon 3100?
I have installed win 7 about 4 weeks ago and I have a hp laptop dv5115nr which uses the ati mobility radeon xpress 200, win 7 uses some generic driver which is ok but not what I am used to (xp pro), is there a a site to download the driver free?
Answer:
The latest drivers are here.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1843722&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%BB
Use the Vista ones, for 32 or 64 bit, whichever you have.
Answer 2:-
Check the following link:-
http://driverscollection.com/?H=Radeon%20Xpress%20200&By=ATI
i have Windows 7 ultimate x64 and the drivers to run my ATI Radeon 4870 work and have already been installed when i switched to windows 7 from windows vista.
I try to download the control center where i can overclock and change settings for my PC and whenever they start to install i get the blue screen and my comp restarts... What can i do?
p.s i did go to windows 7 x64 on the drivers list on the ATI wedsite and didn't accidentally click another OS
anyone know driver for ati 9200 for windows7?
View 2 Replies View RelatedCan any1 help me with this driver for windows 7 , or at least for vista x64 , i'm a little bit nubbish with the search on google i found only catalist but didn't found the driver.
View 1 Replies View RelatedI keep getting this problem whenever I play any games, mostly World of Warcraft. I always get the BSOD! It's the most annoying thing in the world. I just upgraded to 7 yesterday and I downloaded the new drivers from their site.
most I could before it reset.
Stop:0x0000008E
atikmdag.sys Adress at 9397E1F1 base at 93806000
Does anyone know how to fix this?
Newegg.ca - XFX HD-577A-ZNFC Radeon HD 5770 (Juniper XT) 1GB 128-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Cardis my current and old card, I'm trying to find something under the $200 price range again with better performance... also, the card should preferably be the same size lengthwise...8.5") I can probably jam in a 9.2" card..
View 9 Replies View Related