If My RAM Is DDR3 Can I Only Upgrade To DDR3?
Jan 31, 2013I think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?
View 9 RepliesI think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?
View 9 RepliesCan 32gb ssd drive @ 4gb ddr3 will support the desktop with 2gb ddr3 & 200gb
View 3 Replies View RelatedIs DDr3 PC3 10666 ram any faster or slower than DDr3 PC3 19600 ram? Are they interchangeable?
View 7 Replies View RelatedI have a nvidia 9600GSO 384mb ddr3, i would like to upgrade it, Could any suggest a nice GPU that would fit into my system and won't require a PSU upgrade? I know this one is a little old, but it sure is a lot better than my present GPU, nvidia 9800GT gold edition.
View 4 Replies View Relatedddr 3 is much cheaper
View 1 Replies View RelatedOkay so i have a Quad core x6850 Intel CPU, EVGA 280GTX GPU CARD.
Now i installed window 7 x86 bit version ULTIMATE. And i have 6GB DDR3 RAM INSTALLED INTO MY geforce Nforce 790i motherboard. Now the problem is that in Windows 7 it shows "Installed Memory: 6.00GB (2.75 GB Useable)". But in Bios it shows me that 6gigs in installed.
Now does that mean it is WIN 7 that is just reading my DDR3 RAM WRONG? But i am still getting the full performance for all of my 6GB DDR 3 RAM? Since my bios is reading all of the 6GB RAM?
Also i tried doing what other forums indiated i should be doing like type config and check mark or uncheck mark MAX MEMORY. Tried doing that, but noting happened.
Now the only thats left and i am having confusion with is, some people are saying i should Enable Memory remapping in bios? I have a nforce 790i motherboard, and i can't find that exactly in my bios mode. Is there any other way to fix this problem?
I am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be alright as well (if not, it can be upgraded at later stage).
View 9 Replies View RelatedWhen I attempted to turn it back on after having to cut the power, it wouldn't boot up at all.
After resetting the motherboard by taking out the battery, it did get into windows, I ran a startup repair, it got to a while in, then BSOD'ed. Eventually I managed to pin it down to the memory. I have 2x4GB and 2x2GB.
The PC boots up perfectly when only either of these is in, so it doesn't seem to be a problem with either of these sets.
When both are inserted, I get a blue screen when trying to boot up which points to a dll file in system32. Unfortunately I haven't noted the name down yet.
i have update memory ddr3 2GB to 4Gb.
View 3 Replies View RelatedJust wondering if there is a physical difference between a DDR2 and a DDR3?
View 9 Replies View Relatedcan i use DDR3 for acer aspire 5050?
View 1 Replies View RelatedI decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
I have a DX58SO mobo from Intel with i7 processor. There are 4 channels for memory and 3 of them (all blue) are filled with 2GB DDDR3 DIMMS. (total 6 GB)[CODE]Do I have a problem or not? Why is this telling me I only have a "total" of 2047 MB, but 6144 MB installed? Does Win 7 use all channels in parallel, 2GB at a time? Or do I have 6GB x64 bits wide?My Microsoft performance index is low (5.5) on the memory test, the only bottleneck in my system.
View 5 Replies View RelatedNeed to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?
View 3 Replies View Relatedputting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.
View 9 Replies View RelatedDoes GTS 450 1gb DDR3 works well with DualCore Intel Pentium D 805, 2666 MHz (20 x 133) ?....I got 2 Gb RAM(800 MHz)...and my motherboard is XFX MG-63MI-7109 Motherboard ....
View 7 Replies View RelatedWhat graphic card is suitable for pentium 4, 3.0 ghz, ddr3 2gb ram, operating system is window
View 4 Replies View RelatedI was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.
My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies View RelatedI ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
View 9 Replies View RelatedCustomer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
I have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
I purchased Windows 7 Professional through the Ultimate Steal.
Downloaded it, put it on a disk also.
It will go through the start of the setup and copy files etc, and then it will give an error and say to install from a current version of windows I need to use the upgrade anytim through windows.
But when I go to upgrade anytime it asks for an upgrade key, but all I have with the purchase was a product key and it says that I can't use the product key.
any help?
edit: also i have windows 7 home premium installed right now
and here is exactly what it says:
"To upgrade from one edition of Windows 7 to another edition of Windows 7, use Windows Anytime Upgrade. Cancel the upgrade, open the Start menu, and search for Windows Anytime Upgrade. "
can i use the windows 7 professional student upgrade to upgrade from windows 7 home premium?
View 4 Replies View RelatedIf I bought Windows 7 Upgrade for 49.99... could I use it to upgrade windows 7 RC instead of vista or XP assuming it even supports XP.
View 5 Replies View RelatedI have Windows 7 Home Premium installed on my my machine, but is is not activated yet. I will be getting a Windows 7 Professional key from the student offer, and I would like to use that. Is it possible to use that key in Anytime upgrade?
View 7 Replies View RelatedI'm considering whether to upgrade from Windows XP to Windows 7. IMHO, the new OS seems to be not sufficiently "mature" yet, and it is better to wait for the first service pack to come out before actually upgrading.
View 9 Replies View RelatedI have a I7 920, with 12GB DDR3-1600 Memory, 2 x 300GB Raptors in a RAID 0, 1 x 300GB standalone and 640GB Standalone, and a ATI 4870x2 video card. I am upgrading using a DVD, and basically it's taken 7 hours before I aborted the upgrade (62% completed migrating folders and files).
All my other upgrades have gone reasonably quickly (Though not as quickly as some other installs and upgrades seem to go on lesser hardware) though the other 6 builds I have run. I don't really want to run a fresh install, can anyone suggest a solution? Does Windows 7 not really like ICHR10?
I run Windows 7 on my ex-Vista laptop, and would bite off someones hand if it I had to revert. But on my desktop, I dual boot XP and Windows 7, and am just as happy using XP as Windows 7. There are a few things I like prefer in Windows 7, but the same is true for XP.
M$ is already charging me to replace the piece of @@@@ that was Vista with Windows 7, why would I want to pay to upgrade XP? And the Pro upgrade price is OUTRAGEOUS, especially as I am based I the UK.
I accidently installed 64, and It seems to handlr it ok so far.I am thinking my computer was origanally a 64 bit, but had 32 bit vista installed.I got the Ultimate Premium and I like all the Bells and Whistles It seems to handle media files better than vista.I have a Acer Laptop with only 150gb hd and I dont have a dvd burner, so I propose to get a internal HD500gb from ebay 20bucks there abouts and get a dvd burner around the same price, I will later get another 500gb internal hd and get a SATA converter kit with USB and then I have 1tb system really cheap compared to buying a tower... I would like to know if it possible to upgrade my cpu, I got 1ntel celeron 540 1.86ghz, I know I cant get the latest, and I dont want the latest, just a miodel or few up from what I got.. I think the celeron is Pentium 3 I think, I am looking intop Pentium 4 2.86 ghz, I got the chip on another machine, an older machine...
View 2 Replies View Relatedi am always over on vista forums as i have vista as my main OS, but here is my question.
i have 7 Enterprise X64 running in VMWARE runs great except it does not reconize my video card as it is running in a virtual enviroment.
i have vista ultimate X64, when 7 X64 ultimate or enterprise comes out retail wise, I can do a upgrade from vista ultimate X64 to 7 Ultimate or Enterprise X64? correct?