Okay so i have a Quad core x6850 Intel CPU, EVGA 280GTX GPU CARD.
Now i installed window 7 x86 bit version ULTIMATE. And i have 6GB DDR3 RAM INSTALLED INTO MY geforce Nforce 790i motherboard. Now the problem is that in Windows 7 it shows "Installed Memory: 6.00GB (2.75 GB Useable)". But in Bios it shows me that 6gigs in installed.
Now does that mean it is WIN 7 that is just reading my DDR3 RAM WRONG? But i am still getting the full performance for all of my 6GB DDR 3 RAM? Since my bios is reading all of the 6GB RAM?
Also i tried doing what other forums indiated i should be doing like type config and check mark or uncheck mark MAX MEMORY. Tried doing that, but noting happened.
Now the only thats left and i am having confusion with is, some people are saying i should Enable Memory remapping in bios? I have a nforce 790i motherboard, and i can't find that exactly in my bios mode. Is there any other way to fix this problem?
My motherboard is the ASUS Maximus III Formula, using Intel Core I5 760. And I recently did a dual boot on my system. One copy of Windows 7 Ultimate x64 on my original hard drive, and a Windows 7 Home premium x64 bit on another hard drive ( Hitachi ) and after a month or two, I had to format that ( Hitachi ) hard drive as I needed it for extra storage and now I'm getting only 2 Gb usable RAM but I installed 4Gb.
i have corsair xms 2x2 4GB 9-9-9-24 1333mhz with phenom 965 and biostar890gxe..........for about 15days after aasembling the pc running windows7 x64 my pc showed ram installed 4gb 3.25 usable
My PC says it has 4GB of RAM installed but only 3.5GB are usable, I have windows 7 home premium X64.
CPU: Athlon II x3 Unlocked to Phenom II X4 @3Ghz. Motherboard: Asrock N68-VS3-UCC RAM: 4GB DDR3 generic brand. HDD: 1x 320GB SATA, 1x 250GB SATA and 1x 250GB IDE GPU: XFX ONE 5400 series PSUEM 500w PSU.
Windows recognized the full 4GB and the whole 4GB were usable but when I checked about 2 days ago it said that only 3.5GB were usable. I started to do a little research and I found out that my GPU might be using Hyper Memory so i tuned off my system, removed the GPU and when I went to see how much RAM was usable it said 4GB installed 3.25GB usable. So its not my GPU.
My computer's memory was 2GB and i added 4GB more, but only 2GB is usable. I have tried many time take the Ram out and put it back but i still have the same problem.
I installed Windows 7 64 bit from on two partitions.
The first one, a fresh install, Computer Properties shows 4gb RAM, the same value (4096) is also showed in Task Manager.
The second one, I upgraded from Vista 64 bit, it shows 4gb RAM (2usable), the same (2048) is showed in Task Manager.
I heard the story about Memory Remap, my mainboard didn't have it. However, the first case, it automatically recognize 4gb RAM, I guess Windows7 manages everything. Is there anyway I 'turn on' the rest 2gb in the second case?
Earlier tonight I rebooted and noticed that it took an extremely long time to boot. Almost 10 minutes to get the desktop completely loaded. So I checked task manager > performance tab and it says I have only 256mb of RAM. So then I checked My Computer > Properties and noticed it said "Installed Memory (RAM): 4.00 GB (256 MB Usable)" I've had Windows 7 installed for a good 2 weeks now and never had a problem, until I rebooted tonight. I checked my BIOS and all my sticks show up. I DO NOT have a shared memory video card. Memory test checked out fine. I haven't installed any new hardware, nor touched the sticks at all. why Windows 7 started doing this?
I have 4GB of RAM installed in my computer (the stock RAM; I have changed no hardware since receiving the laptop), but Windows tells me on 1.75GB of it is usable. Things I've tried so far, to no avail, include. Going into msconfig and switching off "Maximum Memory", Enable Memory Remapping in Bios (Bios has no Memory Remapping option) Switching RAM Slots One RAM stick at a time (laptop would not start � tried both sticks in both slots) Ran Microsoft memory analysis? Updated some drivers
I recently upgraded from Vista home premium 32 bit to Windows 7 Home premium 32 bit. My system now shows RAM 4GB installed (2.97GB usable) this never happened in my vista version.
I have searched numerous threads on this forum but and have found similar issues but none of the threads seem to have been resolved.
I am thinking to revert back to Vista if i cant make full use of my RAM.
I am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be alright as well (if not, it can be upgraded at later stage).
When I attempted to turn it back on after having to cut the power, it wouldn't boot up at all.
After resetting the motherboard by taking out the battery, it did get into windows, I ran a startup repair, it got to a while in, then BSOD'ed. Eventually I managed to pin it down to the memory. I have 2x4GB and 2x2GB.
The PC boots up perfectly when only either of these is in, so it doesn't seem to be a problem with either of these sets.
When both are inserted, I get a blue screen when trying to boot up which points to a dll file in system32. Unfortunately I haven't noted the name down yet.
I have a nvidia 9600GSO 384mb ddr3, i would like to upgrade it, Could any suggest a nice GPU that would fit into my system and won't require a PSU upgrade? I know this one is a little old, but it sure is a lot better than my present GPU, nvidia 9800GT gold edition.
I decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
I have a DX58SO mobo from Intel with i7 processor. There are 4 channels for memory and 3 of them (all blue) are filled with 2GB DDDR3 DIMMS. (total 6 GB)[CODE]Do I have a problem or not? Why is this telling me I only have a "total" of 2047 MB, but 6144 MB installed? Does Win 7 use all channels in parallel, 2GB at a time? Or do I have 6GB x64 bits wide?My Microsoft performance index is low (5.5) on the memory test, the only bottleneck in my system.
Need to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?
putting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.
Does GTS 450 1gb DDR3 works well with DualCore Intel Pentium D 805, 2666 MHz (20 x 133) ?....I got 2 Gb RAM(800 MHz)...and my motherboard is XFX MG-63MI-7109 Motherboard ....
For some odd reason, my new Windows 7 32 bit laptop is constantly using 40+ precent of it's installed RAM. I checked my computer's properties and found that Windows is only using 2.84 gigs of my computer's 4 gigs of ram. Is there any way I can force it to use 4 gigs? Or at least, force it to use more than my current amount? I have attached a screenshot of my computer's RAM specs.
I have an older desktop, Acer Aspire running Windows 7 Ultimate 32 bit, it had 4gb ram installed (I did know that only 3gb could be used)yesterday I took one of the ram sticks out ( had 4 x 1gb) and put in a different computer. Since then it has started crawling along, I have noticed that it says 3gb ram 1 gb usable. is this something that I need to go into the bios for? I ran the memory diagnostic tool this morning but did not get to see a report.
