How To Upgrade Nvidia 9600GSO 384mb Ddr3
Aug 26, 2011
I have a nvidia 9600GSO 384mb ddr3, i would like to upgrade it, Could any suggest a nice GPU that would fit into my system and won't require a PSU upgrade? I know this one is a little old, but it sure is a lot better than my present GPU, nvidia 9800GT gold edition.
View 4 Replies
ADVERTISEMENT
Jan 31, 2013
I think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?
View 9 Replies
View Related
Sep 4, 2012
Can 32gb ssd drive @ 4gb ddr3 will support the desktop with 2gb ddr3 & 200gb
View 3 Replies
View Related
Sep 11, 2011
Is DDr3 PC3 10666 ram any faster or slower than DDr3 PC3 19600 ram? Are they interchangeable?
View 7 Replies
View Related
May 1, 2012
I run a Lenovo thinkpad r61 15.4' laptop with 1,256mb ram and intel x3100 graphics which says it can support up to 384mb of video graphics.due to having 1gb of ram in one slot and 256mb in the other slot. Is it just using ram from the 256mb slot ? So would taking the 256 out and falling back to 1gb ram improve the graphics ? I havent found any information on that issue and only know that having 2gb of ram can get the card to reach its prime. I just thought I'd ask, I've updated my card to the new driver and cant find any newer one that what I have already.
View 2 Replies
View Related
May 7, 2009
I'm having this really weird problem.
I am currently running a GeForce 9500 GT on vista and have tried upgrading to Windows 7 release candidate 1 from Vista. The problem is, Windows 7 doesn't like the Nvidia drivers I have on my system. So I uninstalled them. Completely. Restarted. Tried the upgrade again, and boom! Still can't upgrade because Nvidia drivers / nview desktop manager (yes, that is what it says).
I have literally restarted my computer 20 times, uninstalling, reinstalling and whateverinstalling. I have no idea what to do in order to upgrade to windows 7. The drivers or my actual hardware is not letting me upgrade.
View 8 Replies
View Related
Jun 16, 2012
in upgrading my video card nvidia g210
View 1 Replies
View Related
Dec 27, 2012
How i upgrade my Nvidia geforce8 8800 for windows 7?
View 2 Replies
View Related
Jan 19, 2012
I'm not sure if this belongs in Drivers or here, but I'm having an issue with the video drivers on my laptop. It's an HP Compaq Presario V6000 series,v6205 according to the limited tech support I received. The laptop was purchased in '06 and originally ran Windows Vista, however I upgraded to Windows 7 Ultimate 32bit a couple of days ago, and have had an issue finding compatible drivers, namely a driver for my nVidia graphics card. HP's website has the drivers for XP and Vista, but want to charge me to get 7 compatible drivers (59.99 for a one-time use). I've read on other forums that it is possible to take the non-manufacturer drivers and modify the .INF files to work, but I'm inexperienced with that sort of stuff. The card is an nVidia GeForce 6150. If there are any other details I've left out, I'd be happy to add them. EDIT: In the event that I can't secure the proper drivers, does anyone know if Linux is an option for such a machine? Or would the same driver issues be present?
View 3 Replies
View Related
Feb 2, 2013
ddr 3 is much cheaper
View 1 Replies
View Related
Dec 9, 2009
Okay so i have a Quad core x6850 Intel CPU, EVGA 280GTX GPU CARD.
Now i installed window 7 x86 bit version ULTIMATE. And i have 6GB DDR3 RAM INSTALLED INTO MY geforce Nforce 790i motherboard. Now the problem is that in Windows 7 it shows "Installed Memory: 6.00GB (2.75 GB Useable)". But in Bios it shows me that 6gigs in installed.
Now does that mean it is WIN 7 that is just reading my DDR3 RAM WRONG? But i am still getting the full performance for all of my 6GB DDR 3 RAM? Since my bios is reading all of the 6GB RAM?
Also i tried doing what other forums indiated i should be doing like type config and check mark or uncheck mark MAX MEMORY. Tried doing that, but noting happened.
Now the only thats left and i am having confusion with is, some people are saying i should Enable Memory remapping in bios? I have a nforce 790i motherboard, and i can't find that exactly in my bios mode. Is there any other way to fix this problem?
View 9 Replies
View Related
Nov 29, 2011
I am thinking to upgrade my ram from 4GB (4x1024MB Corsair XMS3 DDR3) to Kingston HyperX Blu DDR3 1333MHz CL9 8GB DIMM. In near future, I might upgrade to i5/i7 depending on budget along with motherboard. Rest of the hardware will be carried forward to new machine and hoping this RAM will be alright as well (if not, it can be upgraded at later stage).
View 9 Replies
View Related
Nov 20, 2011
When I attempted to turn it back on after having to cut the power, it wouldn't boot up at all.
After resetting the motherboard by taking out the battery, it did get into windows, I ran a startup repair, it got to a while in, then BSOD'ed. Eventually I managed to pin it down to the memory. I have 2x4GB and 2x2GB.
The PC boots up perfectly when only either of these is in, so it doesn't seem to be a problem with either of these sets.
When both are inserted, I get a blue screen when trying to boot up which points to a dll file in system32. Unfortunately I haven't noted the name down yet.
View 1 Replies
View Related
Mar 3, 2012
i have update memory ddr3 2GB to 4Gb.
View 3 Replies
View Related
Apr 14, 2011
Just wondering if there is a physical difference between a DDR2 and a DDR3?
View 9 Replies
View Related
Jun 20, 2012
can i use DDR3 for acer aspire 5050?
View 1 Replies
View Related
Jul 29, 2012
I decided to upgrade my pc by adding a new kingston 2G DDR3 1033 kit .. I Bought it and placed it in the same slot color with the old one (kingston 2g DDR3 1033) .. when i turned on the pc it just gave a black screen without any beeps .. i removed the new one, it worked well .. i changed the clock freq. from the bios from AUTO To 667 and 553 and aslo they didnt work .. BUT when i changed the freq. to 400 .. the new kit worked well with the old one
This is my pc spes. without the new ram installed With the 2 rams installed it Reads 400 MHZ What should i do ?! Is the New kit is bad ?
Note the old one Model is KVR1333D3N9/2G and the new one is KVR1333D3S8N9/2G
View 4 Replies
View Related
Jun 16, 2011
I have a DX58SO mobo from Intel with i7 processor. There are 4 channels for memory and 3 of them (all blue) are filled with 2GB DDDR3 DIMMS. (total 6 GB)[CODE]Do I have a problem or not? Why is this telling me I only have a "total" of 2047 MB, but 6144 MB installed? Does Win 7 use all channels in parallel, 2GB at a time? Or do I have 6GB x64 bits wide?My Microsoft performance index is low (5.5) on the memory test, the only bottleneck in my system.
View 5 Replies
View Related
Apr 29, 2012
Need to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?
View 3 Replies
View Related
Oct 4, 2012
putting together an mobo handling 8GB ddr3 1333 & using max ram 8GB, duo core 2 E8400 3.0GHz 64bit chip, and installing Windows 7 HPrem 64bit. was wondering about how large of a power supply unit i should be considering?Sometimes all of the ram will prob be used w/ vid editing and other times just regular 2-3 applications open.
View 9 Replies
View Related
Dec 11, 2011
Does GTS 450 1gb DDR3 works well with DualCore Intel Pentium D 805, 2666 MHz (20 x 133) ?....I got 2 Gb RAM(800 MHz)...and my motherboard is XFX MG-63MI-7109 Motherboard ....
View 7 Replies
View Related
Oct 23, 2012
What graphic card is suitable for pentium 4, 3.0 ghz, ddr3 2gb ram, operating system is window
View 4 Replies
View Related
Oct 25, 2009
I got motherboard: Asus m2n-mx se plus. Video Card : nVIDIA nForce 6150SE (6100-430), Onboard Audio : nVIDIA MCP61 , D-Link DFE-520TX PCI Fast Ethernet Adapter .
My Motherboard comes with Vista drivers, but I heard that even that are creating problems for video and audio. Should I download any specific drivers beforehand?
View 2 Replies
View Related
Jun 4, 2009
I was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.
My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.
View 9 Replies
View Related
Nov 13, 2009
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies
View Related
Aug 7, 2009
I ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
View 9 Replies
View Related
Nov 30, 2009
Customer dropped off a laptop telling me that his Windows upgrade had failed.
It's a new HP DV6 that had Vista pre-installed on it.
I've taken a look at it, and there's a "Windows.old" folder on the root of C:, which is of course a back up of all his data.
There's also a batch file inside the folder with the following inside of it:
"REM Dummy file for NTVDM"
I'm wondering if there's a way to "continue" the upgrade / merging process? He has asked me to re-install all of his software the way he had it. So i'm hoping there's an easier way to continue where he left off.
I know Windows 7 creates a "Windows.old" folder when upgrading from XP. Not sure why one was created for a Vista to Windows 7 upgrade though.
View 7 Replies
View Related
Dec 24, 2012
I have a pc with Windows XP pro 32bit retail version. First I have made an image, just in case. Then I have upgraded it to windows 8, 64bit by using the retail upgrade DVD and clean install. However, I found out that my motherboard is so old (5 years old) that there are no drivers for win8 and after asking ASUS they said that the motherboard is not supported any more and that there will be no new drivers for it. I tried using win7 drivers but it did not work and without correct drivers a lot of things does not work (in particularly hdmi port).What I want to do now is to revert to my image (windows xp), buy a Windows 7, 64bit upgrade retail DVD and upgrade windows xp to windows 7 for which there are drivers for my motherboard.
1) Can I use windows xp retail (whose product key has already been used to upgrade to win8) image to upgrade to windows 7 retail? will the activation of windows 7 succeed? I want to use clean install again since i upgrade from 32bit to 64bit
2) If the answer to question 1 is a yes, how does microsoft prevent users from using the same windows image file to upgrade different pc's? I mean, theoretically, I can make an image of pc1, copy it to a hard drive of pc2 (even if it will result in erroneous installation due to different specs) and upgrade both systems by using two VUP product keys which are cheaper than one VUP + one retail product keys
3) Can I use windows 8 upgrade DVD which is not used any more to upgrade another PC?
View 4 Replies
View Related
Feb 27, 2010
I purchased Windows 7 Professional through the Ultimate Steal.
Downloaded it, put it on a disk also.
It will go through the start of the setup and copy files etc, and then it will give an error and say to install from a current version of windows I need to use the upgrade anytim through windows.
But when I go to upgrade anytime it asks for an upgrade key, but all I have with the purchase was a product key and it says that I can't use the product key.
any help?
edit: also i have windows 7 home premium installed right now
and here is exactly what it says:
"To upgrade from one edition of Windows 7 to another edition of Windows 7, use Windows Anytime Upgrade. Cancel the upgrade, open the Start menu, and search for Windows Anytime Upgrade. "
View 4 Replies
View Related
Aug 26, 2011
can i use the windows 7 professional student upgrade to upgrade from windows 7 home premium?
View 4 Replies
View Related
Oct 5, 2009
Try this link if you're having problems downloading the Vista/Windows 7 64-bit file.
View 1 Replies
View Related