Making DDR3 2400 Stable - BIOS Setup?

Apr 29, 2012

Need to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?

View 3 Replies


ADVERTISEMENT

Can 32gb Ssd Drive @ 4gb Ddr3 Will Support The Desktop With 2gb Ddr3 & 200gb

Sep 4, 2012

Can 32gb ssd drive @ 4gb ddr3 will support the desktop with 2gb ddr3 & 200gb

View 3 Replies View Related

Is Ddr3 Pc3 10666 Ram Faster Than Ddr3 Pc3 10600 Ram

Sep 11, 2011

Is DDr3 PC3 10666 ram any faster or slower than DDr3 PC3 19600 ram? Are they interchangeable?

View 7 Replies View Related

Does ASUS P7P55D Motherbored Last Bios Version (Version 2003) Stable

Feb 6, 2012

i new to all of this update bios thing and i just learned how to do it today (or so i hope)but i still too scared to give it a try because 1. i never done it before and scare to loss my mobo2. i don't know what the stable version for it3. scare from blackout.anyway i need help from other user that have the same mobo that i do and update his bios allready before (it will really help if you even update it to the last version) ... i need to know if the very last version (Version 2003) of my mobo Bios is stable for it and not case any "side effects" ... because i saw some situations in the past when people update their bios and the results was : they got blue screens nonstop in different situations ,got only black screen after the pc start up,was force to format their pc (in really rare cases), make hardwares to stop wroking, make the pc slower, and etc. i really scared to try it also beacuse i don't know if there is any way to restore the bios to it older version after i update it my motherbored is ASUS P7P55D (normal one, not deluxe and etc) which i bought in the end of 2009and my bios version is still the same (i never update my bios before)Uploaded with ImageShack.usnd it really old.you can see my build at my profile.

View 2 Replies View Related

Does ASUS P7P55D Motherbored Last Bios Version (Version 2003) Stable

Oct 6, 2011

i new to all of this update bios thing and i just learned how to do it today but i still too scared to give it a try because

1. i never done it before and scare to loss my mobo

2. i don't know what the stable version for it

3. scare from blackout.. (lol)

anyway i need help from other user that have the same mobo that i do and update his bios allready before (it will really help if you even update it to the last version) ... i need to know if the very last version (Version 2003) of my mobo Bios is stable for it and not case any "side effects" ... because i saw some situations in the past when people update their bios and the results was : they got blue screens nonstop in different situations ,got only black screen after the pc start up,was force to format their pc (in really rare cases), make hardwares to stop wroking, make the pc slower, and etc. i really scared to try it also beacuse i don't know if there is any way to restore the bios to it older version after i update it my motherbored is ASUS P7P55D (normal one, not deluxe and etc) which i bought in the end of 2009 and my bios version is still the same (i never update my bios before)

View 9 Replies View Related

If My RAM Is DDR3 Can I Only Upgrade To DDR3?

Jan 31, 2013

I think the answer to that is yes....right? In fact it is DDR3 Unbuffered ECC Memory - so that is the exact type that I must upgrade right?

View 9 Replies View Related

How To Setup BIOS

Dec 30, 2010

I have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.

View 4 Replies View Related

AHCI Bios Setup For SSD?

Jan 10, 2012

I have a SSD drive & want to use the AHCI Mode & Native Command Quening from Windows 7 Pro X64. I performed the Regedit by setting the START paramater in the registry key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci from "3" to "0" - and then making the switch in the BIOS from IDE to AHCI. Windows still would not load! The Bios screen would not load Windows 7.I have a Gigabyte GA-EP45-UD3R Board that has a Intel P45 Chipset & I installed the latest Intel Sata drivers before I tried the change. I had to use my Acronis True Image program to get Windows 7 back up & running.My Board has 6 Intel Sata ports & two Gigabyte ports on the board. I don't use the Gigabyte ports & they were left in the IDE mode in the Bios when it failed.The Bios screen loaded differently but failed as I said to load Windows 7.If I perform a clean install will Windows 7 load & install in the AHCI/Native modes with the bios setting to AHCI & not IDE? I have the SSD for programs & a 1TB HDD for storage & backup.

View 7 Replies View Related

Unexpected BIOS Setup Screen

Oct 3, 2012

I was working in Outlook 2010 this morning.I clicked on an e-mail and the mouse was disabled.I was unable to do anything and then the BIOS setup screen came up.I escaped and did a normal startup from the Windows screen that came up and was able to work normally and shut down normally. How should I diagnose and address the problem? I was using a Pentium 5 Toshiba laptop running Windows 7 Home Professional.

View 1 Replies View Related

New Ssd Not Recognized In Setup Of Windows 7 But IS Seen In Bios

Jan 21, 2013

It's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!

View 9 Replies View Related

How To Setup Bios To Be Able To Install From A USB Device?

Jun 14, 2011

I recently read an article about using a USB thumb drive to install Windows 7.Set Up a USB Drive as a Bootable Device to Install Windows 7 IT Professionals.I would like more information about how to do this. After reading the article the questions I had were:Where do I get the Windows 7b ISO file? Can I make it from my present install disk or do I have to buy it? How do I setup my bios to be able to install from a USB device? I am not sure that is possible on the PC I have.

View 7 Replies View Related

Connot Boot To Bios Setup

Mar 19, 2012

After replace cmos battery cr2032on pc motherboard and clear cmos setting,still cannot boot to bios setup display.Although the display show cmos checksum error and loaded default setting!when press the F1 will continue boot to window 7 but lf press for del key enter bios setup will show black display.

View 1 Replies View Related

How To Remove Bios Setup Password

Jan 27, 2013

i have acer aspire 5736z laptop which bios is automatically locked..how can i remove this password..

View 6 Replies View Related

Cannot Boot With Restore CD - Setup Go Straight To BIOS

May 30, 2012

I have a real problem booting with my Restore CD. It doesn't let me go further then the bios. It tells me I can select ESC and it will give me the boot selection pop up, and when I do that it only says that boot selection has been selected but doesn't work. It also gives me an option to select F2 for setup but takes me straight to the bios. I set CD/DVD as first boot priority but it didn't work.

View 2 Replies View Related

BIOS Setup Always Show In Turning On A Notebook / Laptop

Jan 31, 2012

I have a problem when I open my notebook/laptop it always show the BIOS Setup, so what i do is I press "ESC" on keyboard the select "Yes" to discard the changes in BIOS and it loads the windows and works properly I tried to restart but when I restart same process the BIOS Setup always appear, how can I prevent the BIOS Setup showing in turning on my notebook/laptop?

[code]....

View 9 Replies View Related

RAID Array Setup - How To Get Into BIOS And Change Settings

Jun 21, 2012

I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:

Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM

I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?

View 3 Replies View Related

Installing Windows 7 Onto USB Drive - BIOS Setup For Bootup?

Aug 18, 2010

I need to install either windows XP or windows 7 on my USB stick so I can boot my computer from the USB and use it like a normal installation. Articles I read tell you how to install Windows on a USB but not how to allow your computer to boot from the USB like it would be a HDD. I know how to set up my BIOS and I don't need an explanation in that respect I just need a step by step guide or at least a good guide on how to install either XP or 7 onto a USB, not from I've done that 1,000,000 times.

View 9 Replies View Related

Get Into The Bios Setup At Startup On An Asus A50 Series Laptop?

Feb 15, 2012

How do you get into the bios setup at startup on an Asus a50 series laptop?

View 2 Replies View Related

How To Go Setup Bios Menu Without Enter Password In Aspire One D257

Dec 22, 2011

I lost my bios setup password

View 4 Replies View Related

BIOS - Cannot Enter In Setup Mode / Laptop Shuts Down Automatically

Feb 16, 2013

My laptop does boot up when I press F2 to enter setup but in few seconds my laptop shut down automatically. I am using sony vaio model no. VPCEB46FG

Optional Information:
Computer OS: Windows 7 Home Premium (64-bit)

View 1 Replies View Related

No "tools" Option In Navigation Bar In Bios Setup?

Feb 18, 2011

some manual says i can reach the ez flash through the 'tools' option while in cmos setup utility, however i have no such option. now i have no ideas how to enter ezflash

View 2 Replies View Related

Internet Is Not Stable?

Jul 6, 2012

So here's my problem, my internet speed is fine , but the connection just drops at random times ,sometimes every hour , same time, my internet goes down and i have to turn my router back off and on again to make it work. Sometimes it doesn;t even work , i get the yellow sign on my wifi icon, on my toolbar , and i have to leave it on for like a hour before it works again.

I know there's nothing wrong with my wifi router and the modem, because its been working fine ,I think its something to do with the connection lines from my house to the isp. And also when i run a troubleshoot on my wifi , i always get the "the connection between your access point and the internet is broken" So i have to restart my modem and my wifi router. I have to do this about 20 times everyday at least. Sometimes it can work for an hour or even longer without any problems, so it can;t by my modem or my wifi.

Here is a picture of the Diagnostics Test i ran on my modem:I think the fail's are the ones that is causing my internet to behave like this.Im running windows 7. 64 bit. Im using a wifi connection. My setup is the modem being connected to the wifi router , which i then connect from. Also i've called my isp company, they said they would come tomorrow , if they do come , what should i tell the problem is? So they can fix it?

View 6 Replies View Related

Windows 7 Ultimate Is Not Stable

Feb 21, 2011

Unable to use rename. Command is normal for less than 1 second then reverts back to prior state. I have to use "properties" to rename files. Cannot use Favorites or Bookmarks. They drop down normally but disappear before you select anything. Cannot type addresses in Firefox or IE. I type 1 or 2 letters and they become high lighted in blue, as in rename, and are deleted for the next letter. Now I type the site I want in a search engines and enter the site that way. My system is built around a P5q3 Azus motherboard and runs 7 Ultimate, Norton360, Advanced System Care, and A-Squared free.

View 1 Replies View Related

How To Make Install Stable

Oct 20, 2012

i have reinstall windows 7- 3 times. None have worked.i first system restored to earlier time. It work for awhile then stopped. Next i went through the f8.using dell databackup disk, again worked for days and then stopped.. last night i tried the system recovery disk made when first got system. I had tried them before but it wouldnt read them..last night it did. Retore to factory settings. But when i was looking at the computer panel i no longer have the d drive...sending a picture. orginaly there was the c with 56 gigs and d with rest. now d is unalloted. I would like to partition c bigger but thats later. I thought virus but i have ran all online scanners and no virus showed. I have ran all the diagnostics dell and microsoft installed. No problems:

My problems--1. when i turned on pc today, i am getting same message that made me do first restore."Realtek PCI FE Family Controller etc..PXE E-61 media test failed PXE-M0F exiting PXE ROM" exit reboot or install boot media"

2. what happened to d drive, make it useable again?

3. How do i make the install stable?

I have my pc set at f2 to boot to hard drive. Each time i start pc i have to redo this even though i keep saving configuration to hard drive...when using dvd i f12 to boot to dvd but always reset it...so what do i do now...my pc will not stay set to boot to hard drive nor is the d drive there...i used the methods decribed-toubleshooting boot failure. system- Dell Inspiron M5010-AMD Phenom II P920 quadcore 1.60Ghz-4.00GB-64-bit os-NTFS Windows 7 Home Premium sp1 version 6.1

View 3 Replies View Related

How To See If Your System Is Stable While Overclocking?

Jul 8, 2012

I'm very new to overclocking and I'm really bad at it. I can't overclock higher than 5 %. It is not because my hardware is bad because I can auto overclock to 29 % without any trouble. For my cpu I can adjust 10 voltages and I really don't understand it anymore. Can anybody explain me why there are multiple voltages in the cpu and which voltage does what

View 2 Replies View Related

To Increase Pch To Get A Stable System

Aug 8, 2012

I googled around a bit about my i7 860 and what other kinds of O.C others had succeded with and during some of these reads they mention that they increase PCH to get a stable system and one used as high as 1.25 and only 1.18 vcore to achieve 3.8 ghz I belive it was, while I read other guides and peoples toughts and they never touch PCH or PPL, so im a bit confused so to say. I run these settings now and I ran prime95 for 1 hour and 12 min with 0 error.

View 1 Replies View Related

Laptop Cpu Upgrade From I5 To I7 Can It Be Done And Be Stable

Mar 3, 2012

i have a gateway nv5929u laptop with an i5 cpu and was wondering if i can upgrade to an i7 its the same socket right the motherboard should be able to handle it right ? i also want to upgrade the ram to 8ghz and install a ssd hard drive.i just need to get some advise from some pros to see if it is possible

View 1 Replies View Related

Windows 7 Serial Which One Is Stable?

Jan 8, 2013

I plan to buy dvd Window7 for my new computer, but I saw in the store a lot of series of Window7.

View 3 Replies View Related

Use Dd3 Memory In Ddr3?

Feb 2, 2013

ddr 3 is much cheaper

View 1 Replies View Related

Network Connection Is Faster More Stable On XP Than On 7

Aug 26, 2011

I've recently moved into Windows 7 Service Pack 1.First thing (and foremost, right now) I've noticed is how unstable and slow my Internet Connection is; Windows 7 reports my Wi-Fi router's signal strength as "Average/Good", whereas in XP it's always "Excellent". I can't browse at all, or log into Windows Update to get fixes; the connection drops erratically.What offline tweaking can I do to fix this situation? I use a REALTEK RTL8185 54M Wireless LAN Network Adapter to connect to a D-LINK WBR-1310 Wi-Fi router.

View 6 Replies View Related

Is 7 Professional More Stable Than Home Premium

Jan 23, 2012

I know with XP, Professional did not crash as much as XP home.Is that the case with Windows 7?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved