i have a gateway nv5929u laptop with an i5 cpu and was wondering if i can upgrade to an i7 its the same socket right the motherboard should be able to handle it right ? i also want to upgrade the ram to 8ghz and install a ssd hard drive.i just need to get some advise from some pros to see if it is possible
View 1 RepliesSo here's my problem, my internet speed is fine , but the connection just drops at random times ,sometimes every hour , same time, my internet goes down and i have to turn my router back off and on again to make it work. Sometimes it doesn;t even work , i get the yellow sign on my wifi icon, on my toolbar , and i have to leave it on for like a hour before it works again.
I know there's nothing wrong with my wifi router and the modem, because its been working fine ,I think its something to do with the connection lines from my house to the isp. And also when i run a troubleshoot on my wifi , i always get the "the connection between your access point and the internet is broken" So i have to restart my modem and my wifi router. I have to do this about 20 times everyday at least. Sometimes it can work for an hour or even longer without any problems, so it can;t by my modem or my wifi.
Here is a picture of the Diagnostics Test i ran on my modem:I think the fail's are the ones that is causing my internet to behave like this.Im running windows 7. 64 bit. Im using a wifi connection. My setup is the modem being connected to the wifi router , which i then connect from. Also i've called my isp company, they said they would come tomorrow , if they do come , what should i tell the problem is? So they can fix it?
Unable to use rename. Command is normal for less than 1 second then reverts back to prior state. I have to use "properties" to rename files. Cannot use Favorites or Bookmarks. They drop down normally but disappear before you select anything. Cannot type addresses in Firefox or IE. I type 1 or 2 letters and they become high lighted in blue, as in rename, and are deleted for the next letter. Now I type the site I want in a search engines and enter the site that way. My system is built around a P5q3 Azus motherboard and runs 7 Ultimate, Norton360, Advanced System Care, and A-Squared free.
View 1 Replies View Relatedi have reinstall windows 7- 3 times. None have worked.i first system restored to earlier time. It work for awhile then stopped. Next i went through the f8.using dell databackup disk, again worked for days and then stopped.. last night i tried the system recovery disk made when first got system. I had tried them before but it wouldnt read them..last night it did. Retore to factory settings. But when i was looking at the computer panel i no longer have the d drive...sending a picture. orginaly there was the c with 56 gigs and d with rest. now d is unalloted. I would like to partition c bigger but thats later. I thought virus but i have ran all online scanners and no virus showed. I have ran all the diagnostics dell and microsoft installed. No problems:
My problems--1. when i turned on pc today, i am getting same message that made me do first restore."Realtek PCI FE Family Controller etc..PXE E-61 media test failed PXE-M0F exiting PXE ROM" exit reboot or install boot media"
2. what happened to d drive, make it useable again?
3. How do i make the install stable?
I have my pc set at f2 to boot to hard drive. Each time i start pc i have to redo this even though i keep saving configuration to hard drive...when using dvd i f12 to boot to dvd but always reset it...so what do i do now...my pc will not stay set to boot to hard drive nor is the d drive there...i used the methods decribed-toubleshooting boot failure. system- Dell Inspiron M5010-AMD Phenom II P920 quadcore 1.60Ghz-4.00GB-64-bit os-NTFS Windows 7 Home Premium sp1 version 6.1
I'm very new to overclocking and I'm really bad at it. I can't overclock higher than 5 %. It is not because my hardware is bad because I can auto overclock to 29 % without any trouble. For my cpu I can adjust 10 voltages and I really don't understand it anymore. Can anybody explain me why there are multiple voltages in the cpu and which voltage does what
View 2 Replies View RelatedI googled around a bit about my i7 860 and what other kinds of O.C others had succeded with and during some of these reads they mention that they increase PCH to get a stable system and one used as high as 1.25 and only 1.18 vcore to achieve 3.8 ghz I belive it was, while I read other guides and peoples toughts and they never touch PCH or PPL, so im a bit confused so to say. I run these settings now and I ran prime95 for 1 hour and 12 min with 0 error.
View 1 Replies View RelatedI plan to buy dvd Window7 for my new computer, but I saw in the store a lot of series of Window7.
View 3 Replies View RelatedI've recently moved into Windows 7 Service Pack 1.First thing (and foremost, right now) I've noticed is how unstable and slow my Internet Connection is; Windows 7 reports my Wi-Fi router's signal strength as "Average/Good", whereas in XP it's always "Excellent". I can't browse at all, or log into Windows Update to get fixes; the connection drops erratically.What offline tweaking can I do to fix this situation? I use a REALTEK RTL8185 54M Wireless LAN Network Adapter to connect to a D-LINK WBR-1310 Wi-Fi router.
View 6 Replies View RelatedI know with XP, Professional did not crash as much as XP home.Is that the case with Windows 7?
View 5 Replies View RelatedAdvertised to run 1.65v 9-9-9-27 at 1600 MHz. I've tried bumping up voltage and QPI to no avail. Will run at 1600 MHz for usually less than an hour before the computer shuts off. No BSOD, no errors, just shuts off.
View 2 Replies View RelatedI have a machine that's been flakey for about 2 months. It was fine, running Win7 64bit Home Premium just fine for 2 years. I upgraded the video card about 6 months ago and had no problems.Then, about 2 months ago, it would randomly stop responding. Mouse movements still worked, but buttons clicked wouldn't do anything. I could be running a Microsoft Security Essentials scan and it would just not progress. No malware scanners run from DVD found anything. I did the Kaspersky Rescue disc, and the Windows Defender Offline disc. Nothing was found.I assumed my HDD was dying, so I bought a new one (wanted to upgrade anyways). I took out the old HDD and put the new one in. I did a clean install of Win7 from a DVD I burned. The Win7 install goes perfectly. However, after the first login, I get the same problems after about 8-15 minutes. The machine just stops doing anything. The mouse still moves, status bars cycle but nothing completes. I can't open IE, can't kill anything from Task Manager, can't do anything with the mouse or keyboard that actually DOES anything, if that makes sense.
The weird thing is that the machine is perfectly stable in Safe Mode with Networking (other Safe Modes are also stable). It can run for a week straight in Safe Mode, connect to the internet, write word docs, etc. No errors, no warnings, no odd behavior. When I try to then reboot and login to Windows normally, same problems as above.Do I have a strange hardware issue (video card, memory failing, power supply...???) or some BIOS virus that's survived the new HDD and clean install?I'm at my wit's end, and my wife wants me to call Dell, which I don't want to do I'd rather fix this myself. I'm not afraid of formatting or wiping partitions because there's nothing on the HDD.
Need to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?
View 3 Replies View RelatedMy Windows 7 Lenovo ThinkPad X201 X-64 system experienced 3 BSOD crashes today, after 6 months with no issues. All three bugcheck codes seem to be for different errors.I have attached SF Diag output, CPU-Z screenshots, and RAMMon screenshots.
View 9 Replies View Relatedi new to all of this update bios thing and i just learned how to do it today (or so i hope)but i still too scared to give it a try because 1. i never done it before and scare to loss my mobo2. i don't know what the stable version for it3. scare from blackout.anyway i need help from other user that have the same mobo that i do and update his bios allready before (it will really help if you even update it to the last version) ... i need to know if the very last version (Version 2003) of my mobo Bios is stable for it and not case any "side effects" ... because i saw some situations in the past when people update their bios and the results was : they got blue screens nonstop in different situations ,got only black screen after the pc start up,was force to format their pc (in really rare cases), make hardwares to stop wroking, make the pc slower, and etc. i really scared to try it also beacuse i don't know if there is any way to restore the bios to it older version after i update it my motherbored is ASUS P7P55D (normal one, not deluxe and etc) which i bought in the end of 2009and my bios version is still the same (i never update my bios before)Uploaded with ImageShack.usnd it really old.you can see my build at my profile.
i new to all of this update bios thing and i just learned how to do it today but i still too scared to give it a try because
1. i never done it before and scare to loss my mobo
2. i don't know what the stable version for it
3. scare from blackout.. (lol)
anyway i need help from other user that have the same mobo that i do and update his bios allready before (it will really help if you even update it to the last version) ... i need to know if the very last version (Version 2003) of my mobo Bios is stable for it and not case any "side effects" ... because i saw some situations in the past when people update their bios and the results was : they got blue screens nonstop in different situations ,got only black screen after the pc start up,was force to format their pc (in really rare cases), make hardwares to stop wroking, make the pc slower, and etc. i really scared to try it also beacuse i don't know if there is any way to restore the bios to it older version after i update it my motherbored is ASUS P7P55D (normal one, not deluxe and etc) which i bought in the end of 2009 and my bios version is still the same (i never update my bios before)
How to upgrade laptop CPU
View 9 Replies View RelatedI have a HP dv5 Series laptop. I wish to upgrade from Vista Basic 32 to Windows 7 32.
However,the upgrade lists out certain issues like SCSI/RAID Host controller and keyboard filter(among others),as potential issues.
What should I do to resolve these issues,and where do I go to find resources needed for the solution?
Also,is it necessary to uninstall services like Catalyst manager,and UT3 and reinstall them,or can I just leave 'em there,install Windows 7 and then update these programs?
how i want upgarade my laptop msi cr410 from 1GB ram To 2GB ram.
View 2 Replies View RelatedI recently upgraded my dell desktop from 2005 to windows 7. It works great. I want to do the same with my laptop, but I am worried the laptop is not good enough for windows 7. According to this site: PassMark - CPU Benchmarks - List of Benchmarked CPUs the laptop's processor is actually better than the desktop's but I'm still not sure. Here are the specs of my laptop
[code]...
I am trying to install on an HP DV6-1063TX laptop computer.
I have runs upgrade adviser it reports 1 issue although I am not sure what it is,
In the System report I get two notices one about MS Mail & Web filtering and one suggesting a visit to HP website, everything else is green ticked so I don't think there are any serious problems here.
In the Devices section there is a ? againnst the HP DVB-T/Analog TV-Tuner but again all else is green ticked.
In the Software section I get a 'Yellow Triangle !' against Adobe Shockwave Player version 10.2.0.023, everything else has green ticks. The problem is that as far as I can see there should not be Adobe Shockwave version 10 as I have uninstalled not only this program but all the other Adobe software as well. I have tried updating to version 11.5, I have used Adobe's standalone uninstall tool for Shockwave but Windows 7 UGA insists it is still on the computer. I have run CCLeaner but all to no avail. Is this the problem?
On the first attempt I had a problem with HPs Keyboard Filter which I understand is related to the HP Quick Launch Button software, I have uninstalled the software and have upgraded to the latest version.
I have tried the installation 3 or 4 times now with the HP software upgraded or fully installed. Each time the installation goes through all the on-line checks, system checks, file expansion etc... only to find that it fails during the final stage. During the last attempt I had the upgraded Keyboard Filters installed and this again caused a problem so I am going to uninstall the upgraded software and try another install although I hold little hope for success.
The fact that the Windows 7 UGA reports a phantom Adobe Installation leads me to think the problem may be there but I have no idea how to solve this as it is not on the machine.
I would prefer to do the upgrade installation if possible as it will save many hours of software installation (after hours of time already wasted on Windows 7 installation), and I am worried that being a laptop Windows 7 may fail with some of the drivers it does not help that I cannot find this laptop on HPs website even though it was bought just over 12 months ago.
I really want to get rid of this Vista installation and hope that someone here can be of assistance, in the meantime I will be trying one more attempt to upgrade after uninstalling the HP Quick Launch Bitton software.
I recently bought a samsung NP-300V5A laptop for compsci at school, and picked it due to the fact that out of all the laptops at microcenter, this one was at a reasonable price with an i7 2670qm, however, coming from building 3 of my own very high end desktops (3930k w/ gtx 690 & ssd's) the 5400 rpm drive just was unbearable, so I went out and picked up a crucial M4, and replaced it. I also bought a copy of windows 7 home premium OEM and tried booting from that dvd, and it would not work, I just got a backlight loop, so I inserted the Samsung recovery install disc, and used it to install windows, worked just the same as any other win7 install, however, my internet is not working now, and my laptop's monitor/display is recognized as a generic nonPnP and won't go to its max resolution.
View 3 Replies View RelatedI received my laptop (HP dv2635) back today at factory settings on 32-bit Vista Professional after having to send it away to get the mainboard replaced. I installed Win 7 and all seems to be going well, though there are a few things like drivers for webcam, touchpad, fingerprint reader etc that are not up to date because these devices are not responding in the same way they used to.
HP website has not yet listed driver updates for Windows 7, but I recall reading somewhere on several of the forums I have looked at that most Vista drivers for devices such as these should work. Is this true?
I can definitely survive with things as they are until HP extends driver support over the coming weeks, but a temporary fix would definitely eb awesome, especially for the touchpad.
I'm getting since upgrading my laptop from Vista to 7. Laptop has allways been faultless before the OS upgrade (clean install). After the upgrade yes it runs quicker but it overheats and shuts down. -The laptop is getting hotter than usual and depending on CPU demand will just shut down, the only warning being the fan speed increasing just before it dies. I have tried the following;
1. Cleaned out the fan and air dusted all under the cover. -even tried freezer spray to the bottom cover!
2. restored all the drivers I had backed up before the instal.
3. checked the latency on the system (the computer is mainly used for Music) APCI.sys sits high on the demand list and its latency increases as CPU heats. -Not sure if this is the problem, can find no reliable info as to if I can stop it running (not listed in the services
4. removed battery and ran the laptop. -still shuts down and runs red hot!
5. checked the Acer website for driver. It only has drivers listed for Vista and XP (not tried these as yet).
Was thinking of updating all drivers to latest using a driver update program, had allready done the CPU update but to be honest I have had problems before with the updated drivers causing more problems than they solve on other PC's.
Seems to be a lot about Win 7 causing overheat problems
So my brother got a new vista laptop recently and it came with a paper saying he can upgrade to Windows 7 for free.
So i go on HP's site (he got a pavilion), and i come across the page where i place my order. But then i find this:
It says it costs 30 euros! I thought it was meant to be free!? 30 euros isn't much anyway but thats not the problem, my problem is also that i cant pay online because i don't have paypal or a credit card!
Isnt it meant to be free? Or is that the shipping cost?
I purchased a SSD for my laptop and installed it. Therefore the SSD is blank with no OS on it. So I need to install 7 but it's an upgrade.
1.) Partition my 120GB SSD as partition#1 40GB, partition#2 40GB, leave rest unpartitioned
2.) Install XP on partition #2
3.) Install 7 upgrade on partition#1 which will see XP on partition #2
4.) Once install is over delete partition#2 and recreate partition#2 as 80GB
have just bought a refurbished toshiba Satelite laptop from Curry's and after a few days it starting coming up with an 'error occurred during upgrade' message. It appears several times during the day. The laptop seems to be running okay otherwise, but it is annoying when it keeps popping up. I am running windows 7.
View 13 Replies View RelatedI plan to replace Win 7 HP 64bit with Win 7 Ultimate 64bit on an Asus N53S, a replacement for a laptop that is now trashed and on which the win 7 OEM 64bit version had been installed to replace Win Vista. Is it possible to overcome Win 7 OEM being keyed to one computer MS protocol and if so, how is it done?
View 2 Replies View RelatedI own a GateWay laptop NV51B15u series. I was simply wondering if I would be able to upgrade the processor to something more powerful. Currently it is 1.6 GHz, and I play a lot of PC games, so wanted something a bit faster, at least 2.4 GHz. I know this is not a gaming computer, though it has surprised me, and I love him. Even runs Dead Island full graphics, which surprised me. Anyways, my current processor is a 1.6GHz dual-core AMD E-Series.
View 1 Replies View RelatedJust built my new computer but realized that I can't use the same Windows 7 disc/cd-key that's on my old computer because it's only one per computer when I thought it was 3.Looking at the prices on the Windows 7, it costs $119 for upgrade and $200 for full retail. From what I have read, when installing using the upgrade disc, it would detect my previous Windows version and if it's older than XP, or if there's no Windows installed, it would not activate Windows as it isn't a proper license and I would need the full retail one.
View 5 Replies View RelatedAspire 5250-BZ808 Laptop with 2GB Ram. Can I Upgrade?
View 1 Replies View Relatedcan l connect online for upgrade for my laptop
View 1 Replies View Related