How To Setup Bios To Be Able To Install From A USB Device?
Jun 14, 2011
I recently read an article about using a USB thumb drive to install Windows 7.Set Up a USB Drive as a Bootable Device to Install Windows 7 IT Professionals.I would like more information about how to do this. After reading the article the questions I had were:Where do I get the Windows 7b ISO file? Can I make it from my present install disk or do I have to buy it? How do I setup my bios to be able to install from a USB device? I am not sure that is possible on the PC I have.
View 7 Replies
ADVERTISEMENT
Nov 7, 2010
So im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies
View Related
Dec 30, 2010
I have two SATA hard drives. I was poking around in the BIOS yesterday and noticed that they were setup IDE instead of AHCI. I am not sure what either does and did not want to change anything without asking. When I first got my PC, it had XP installed, so I am thinking that is why IDE is set. Do I need to change it to AHCI? I am not having any problems. Would it be of any great advantage to change it? I understand that after the OS is installed, it is a problem to switch to AHCI.
View 4 Replies
View Related
Jan 10, 2012
I have a SSD drive & want to use the AHCI Mode & Native Command Quening from Windows 7 Pro X64. I performed the Regedit by setting the START paramater in the registry key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci from "3" to "0" - and then making the switch in the BIOS from IDE to AHCI. Windows still would not load! The Bios screen would not load Windows 7.I have a Gigabyte GA-EP45-UD3R Board that has a Intel P45 Chipset & I installed the latest Intel Sata drivers before I tried the change. I had to use my Acronis True Image program to get Windows 7 back up & running.My Board has 6 Intel Sata ports & two Gigabyte ports on the board. I don't use the Gigabyte ports & they were left in the IDE mode in the Bios when it failed.The Bios screen loaded differently but failed as I said to load Windows 7.If I perform a clean install will Windows 7 load & install in the AHCI/Native modes with the bios setting to AHCI & not IDE? I have the SSD for programs & a 1TB HDD for storage & backup.
View 7 Replies
View Related
Oct 3, 2012
I was working in Outlook 2010 this morning.I clicked on an e-mail and the mouse was disabled.I was unable to do anything and then the BIOS setup screen came up.I escaped and did a normal startup from the Windows screen that came up and was able to work normally and shut down normally. How should I diagnose and address the problem? I was using a Pentium 5 Toshiba laptop running Windows 7 Home Professional.
View 1 Replies
View Related
Jan 21, 2013
It's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!
View 9 Replies
View Related
Mar 19, 2012
After replace cmos battery cr2032on pc motherboard and clear cmos setting,still cannot boot to bios setup display.Although the display show cmos checksum error and loaded default setting!when press the F1 will continue boot to window 7 but lf press for del key enter bios setup will show black display.
View 1 Replies
View Related
Jan 27, 2013
i have acer aspire 5736z laptop which bios is automatically locked..how can i remove this password..
View 6 Replies
View Related
May 30, 2012
I have a real problem booting with my Restore CD. It doesn't let me go further then the bios. It tells me I can select ESC and it will give me the boot selection pop up, and when I do that it only says that boot selection has been selected but doesn't work. It also gives me an option to select F2 for setup but takes me straight to the bios. I set CD/DVD as first boot priority but it didn't work.
View 2 Replies
View Related
Jan 31, 2012
I have a problem when I open my notebook/laptop it always show the BIOS Setup, so what i do is I press "ESC" on keyboard the select "Yes" to discard the changes in BIOS and it loads the windows and works properly I tried to restart but when I restart same process the BIOS Setup always appear, how can I prevent the BIOS Setup showing in turning on my notebook/laptop?
[code]....
View 9 Replies
View Related
Apr 29, 2012
Need to Make DDR3 2400 Stable. I have been able to get my system to post and sometimes get into windows having my ram set to DDR3 2400. However I have yet to make it run stable enough to trust it. IE blue screens. Does anyone know simple things to check and what to set into the bios?
View 3 Replies
View Related
Jun 21, 2012
I am getting ready to set up a RAID Array but this is my first time doing anything with RAID. I know how to get into the BIOS and change settings and I know with two hard drives, I should do RAID 1. However, I just have a few questions before I do this. First off, I am an idiot and did not notice that my first hard drive I got when I built the computer has a 32 MB Cache:
Caviar Blue 1TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive WD10EALX - OEM
I noticed it only had a 32 MB CACHE when I went to get another one. I then asked for the version with a 64 MB CACHE (WD1002FAEX), paid for it and left. Will these two hard drives work together in RAID if they have different sized caches?
View 3 Replies
View Related
Aug 18, 2010
I need to install either windows XP or windows 7 on my USB stick so I can boot my computer from the USB and use it like a normal installation. Articles I read tell you how to install Windows on a USB but not how to allow your computer to boot from the USB like it would be a HDD. I know how to set up my BIOS and I don't need an explanation in that respect I just need a step by step guide or at least a good guide on how to install either XP or 7 onto a USB, not from I've done that 1,000,000 times.
View 9 Replies
View Related
Feb 15, 2012
How do you get into the bios setup at startup on an Asus a50 series laptop?
View 2 Replies
View Related
Dec 22, 2011
I lost my bios setup password
View 4 Replies
View Related
Feb 16, 2013
My laptop does boot up when I press F2 to enter setup but in few seconds my laptop shut down automatically. I am using sony vaio model no. VPCEB46FG
Optional Information:
Computer OS: Windows 7 Home Premium (64-bit)
View 1 Replies
View Related
Mar 27, 2012
I was wondering if it was possible to image one device after it's been setup and re-image the other 24 tablets with the created image. I know its *possible* but will there be issues with the Windows 7 key/activation process? Each device has an OEM key/product ID in place and I don't want to wipe it if at all possible. I intend to use Macrium Reflect Free Edition, are there better options for what I'm trying to do? We'd also be using the original image as an emergency restore just in-case a tech in the field decides to get into some system aspects that they ought not have access to (taken care of but some of our guys are fairly crafty).
View 1 Replies
View Related
Dec 29, 2011
I got my computer working but when I started it up it didn't tell me to press F8 or ESC or anything to get into the Bios. But what it does say is "Reboot and Select proper boot device. Or insert Boot Media in selected Boot device and press a key". I am assuming, since I cant enter the bios too tell it where to boot from, Id just put in the Operating System disc and let it install itself. When it says "boot media" it means the Operating System right?
View 8 Replies
View Related
Dec 4, 2011
Still trying to find out why the Ports, Coms, etc don't show anywhere in Device Manager. I noticed an old Post where it said to look in add/Remove Hardware. Where do I find this Add/Remove Hardware option? There was also a Post to check the BIOS for this and to see if PORTS is set to Auto. How to have the Ports show up in Device Manager.
View 5 Replies
View Related
Jan 13, 2013
I recently bought two Sandisk SSD's to run in RAID for my rapidly aging computer. I'm currently installing windows 7 (x64) on my new drives and I get the "no device drivers found" message that has haunted me in the past. I remember previously I resolved this issue on my Samsung F1 by setting the drive configuration in my BIOS to IDE, of course, this is not possible now as it must be set to RAID.
View 4 Replies
View Related
Feb 3, 2011
I'm trying to create a dual boot with win7 and ubuntu. I want to install win7 first and then the other os. So, using Gparted, if I create a partition, formatted or not, win7 setup will not recognize my hdd and i get the above error message. "No device drivers found". If I set my hdd space as unallocated, it gets recognized, but setup tells me it's unable to install windows into any of the drives. No further information is delivered.
The thing is I can easily install ubuntu and set it up. So there's nothing wrong with my hdd. Why would windows not recognize it and request for the drivers? I went to the Hitachi website, but they tell me there are no drivers available, since all OSs already have that information. I wonder why I'm having such a hard time installing win7. Ubuntu clearly works and installs smoothly and no errors occur.
More info:
- Installing Windows 7 Ultimate 64bit
- HDD (500gb) is empty, expect for one OEM recovery partition (12gb)
View 1 Replies
View Related
Feb 18, 2011
some manual says i can reach the ez flash through the 'tools' option while in cmos setup utility, however i have no such option. now i have no ideas how to enter ezflash
View 2 Replies
View Related
Oct 17, 2011
I'm building a new computer without a CD drive, because I realized I have no use for it. I know that you can install W7 from a USB into a PC with an existing OS, but obviously as I am building the computer, I will have to install the OS into the BIOS. I am getting a Biostar A880G+, but I'm not sure what BIOS it uses. Note: when I asked this question on Yahoo! Answers, many people thought that I was trying to update the BIOS with a USB, which is already a feature of the A880G+, but that's not what I am doing!
View 6 Replies
View Related
Dec 30, 2011
I saw anohter thread like this one, but it was stupid :P So I'm trying to install a computer game, and when i run Setup.exe, it says "Do you want the following program from an unknown publisher to make changes to this computer?" I click Yes, and thats it. It goes away and nothing happens. The hourglass shows up for a second and nothing happens.
View 1 Replies
View Related
May 30, 2010
my attempt to install windows 7 today ended in ! When I boot from the DVD, choose the Language and press "Install" I get an Error message stating "A DVD/CD drive device driver is missing. If you have a driver CD/Floppy please insert it now..."
Here are my specifications-
HP Pavilion p6126f Desktop PC Product Specifications HP Pavilion p6126f Desktop PC - HP technical support (Austria - English)
I have experienced this same problem with Vista x86 and x64. I am trying to clean install Windows 7 64bit.
I put the drivers on a thumb drive and Browse to it when 7 prompts me. Funny thing is, Windows 7 reads all the other files on the thumb drive like .psds, .flas, .skps, and so on.... but it just plays stupid to the actual drivers for the motherboard/chipset. The system rejects XP and I was forced to put Ubuntu on it. Ubuntu sucks, nothing runs. I know all about WINE to get some programs to run but I use the entire Adobe Suite.
View 9 Replies
View Related
Oct 16, 2012
I want to say that this computer has the Windows 8 beta on it as its only OS. It's very clunky and full of bugs and whatnot and I want it off so I'm putting windows 7 on it and erasing everything on it. This shouldn't be a problem for these forums since everything I"m having problems with has nothing to do with the OS. Besides installing. now, basically this computers main parts are better than my own (it's not that great anyway) It's motherboard is x65 bit, it had 2 gb 800 mhz ram (my computer had the same amount but only 667mhz) it's processor is 3.00 GHz (mine is 2.3 GHz)So basically it's a better computer for the main parts. I've not looked at the PSU but I'm sure it's better aswell. The only thing that isn't better is the graphics card. It's a 7 series while mine is a 9. So, basically I want to put the best of my computer to this better one. Mine feels newer (since I keep it dusted so it sounds really smooth, while this one sounds a bit old. But either way I want to install windows on it. The only problem is that the BIOS is inoperable. When loading into the BIOS the keyboard no longer seems to work. Its light go off. But every once in a while on trying, I can get it into the boot menu so I can move it to put from CD rom. But at this point, no matter what, it won't let me scroll through the options.So naturally I went to google and came with some results that it could be the BIAS needing an update OR taking the CMOS battery out and allowing it to load default values. I tried the latter first, overnight actually. This brought it to default settings, but no luck. It didn't help the keyboard. Now, I'm on the "update BIAS" part. But I can't even seem to find the right update for this motherboard. I tried installing CPU-z but this Windows 8 needs framework to run the software since it's not made for W8. So I just look around on the MB myself and find the Model Number. It's D33C98. I googled it and mostly game up with Gigabyte results but I can't find BIOS updates for this model anywhere. I see manuels but I can't find much of anything for this MB.I thought about just putting the HD in my current computer and loading windows 7 on to it and putting back in the other one so I could just use my computers BIOS, but I've heard this isn't the best thing to do.
View 9 Replies
View Related
Oct 15, 2010
After an attempt to dual boot my system with 32 bit OS, I couldn't boot back into 64, it wasn't even an option. So, I figured I must have messed up the install and it was time for a clean one. Now I get an option to dual boot windows 7 or windows 7 (recovered).
Recovered is the one I want, but if I switch my boot HDD to the one that Windows 7 (recovered) is on, bootmgr is suddenly MIA.
I have not a clue how to restore it, and I even wiped the second HDD clean.
View 9 Replies
View Related
Aug 19, 2009
Windows 7 works fine, except some things. But I wanted to reinstall it after I updated my BIOS from 1.1 to 1.8.
After it loads my working install dvd, it gives me BSOD with stop code 124
Its the same problem he has: windows 7 crash on install bsod stop 0×00000124 - Windows 7 Forums
But i'm in another situation.
Maybe I could downgrade my BIOS, but I don't know how. Or maybe ill just have to change a BIOS setting.
View 2 Replies
View Related
Jun 13, 2010
Ok so I have 2 Hard drives on my notebook one HDD and a SSD. I have Windows 7 installed on the HDD and can boot to it. Ive been able to access the SSD and move files to it from Windows 7 installed on the HDD.When I try to install Windows 7 on the SSD Windows cant seem to find the SSD.The SSD is Intels X25-M SATA 80GB. Any clues on what I can do?
View 9 Replies
View Related
Aug 30, 2010
Ok, I tried to install Windows 7 a while back, and it would freeze every time during 'expanding files' section. I also run into similar problems when it comes to installing Vista. I've gotten Vista to install maybe 2 times and both times it ran fine for a little then it refused to boot (not sure where in the process anymore).I checked the Windows Vista / 7 compatibility guide on Microsoft's page and everything i have SHOULD work, so I'm not thinking its hardware issues.I read another post on these forums that had someone saying it worked when they swapped out the dvds when it froze. I don't believe its the disc either, because both Vista and 7 had no problems installing on other computers that i tested it on. Running a Virtualbox with 768mb RAM assigned to it installed flawlessly as well.Why does my install keep freezing on the machine I plan to activate Windows with, but not on any other?
View 4 Replies
View Related
Dec 5, 2009
Can you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.
View 9 Replies
View Related
