Ok so I have 2 Hard drives on my notebook one HDD and a SSD. I have Windows 7 installed on the HDD and can boot to it. Ive been able to access the SSD and move files to it from Windows 7 installed on the HDD.When I try to install Windows 7 on the SSD Windows cant seem to find the SSD.The SSD is Intels X25-M SATA 80GB. Any clues on what I can do?
View 9 Replies
So my system (updated specs in my profile) has been running perfectly since first built in January.Saturday, a Steam update came out. Ever since then, I have had major problems. It starts with the entire system totally freezing and occasionally BSOD.If I reset (hardware reset button), then bios can't find any of my hard drives (two different SATA channels), but it can usually find the DVD (also SATA). Sometimes it will hang on the drive part of boot up. (ACHI mode is enabled.)If I do a cold boot (hardware off, wait 15 seconds, then on), then it boots and runs fine. for about an hour, maybe two... then the above happens again. It doesn't matter what I'm doing, games, surfing, or not even at my computer. I did notice that the drives were running much slower than normal, so I updated the Intel Response Time thing (whatever you call it). That greatly improved drive response and boot time. But it did not cure the crashes.Other than verifying all the case wires were firmly connected, I haven't had time to do anything else.I can't imagine how a software update (Steam) could frack up my bios or my mb, but that is the only thing that has changed between running perfectly to totally unstable.
I'm planning to uninstall steam and reinstall.I'm not confident that will help if the update has caused another problem.I don't know if it's Windows 7, Steam, hardware, or a bios issue.
I'm trying to install a new video card and when I enter BIOS I can't find anything that let's me switch the display from the on-board to PCI. Does any know how to do this?
View 5 Replies View RelatedHow to find out my bios version and update it? Or to look to see if there are any updates available.
View 6 Replies View RelatedI have chinese crap motherboard that its manufacturers customer service is only one person and gave me 700kb rom file through chat in a very long 2 hours.My problem is I can't find appropriate flashing utility for my bios file (.rom). Please don't mind contacting customer service again. I am very disappointed about it.I have tried russian utility uniflash 1.47 re 09, one ami flashing exe program and one ami flashing .com (ms dos) program. [code]
View 2 Replies View RelatedI'm building a new computer without a CD drive, because I realized I have no use for it. I know that you can install W7 from a USB into a PC with an existing OS, but obviously as I am building the computer, I will have to install the OS into the BIOS. I am getting a Biostar A880G+, but I'm not sure what BIOS it uses. Note: when I asked this question on Yahoo! Answers, many people thought that I was trying to update the BIOS with a USB, which is already a feature of the A880G+, but that's not what I am doing!
View 6 Replies View RelatedI want to say that this computer has the Windows 8 beta on it as its only OS. It's very clunky and full of bugs and whatnot and I want it off so I'm putting windows 7 on it and erasing everything on it. This shouldn't be a problem for these forums since everything I"m having problems with has nothing to do with the OS. Besides installing. now, basically this computers main parts are better than my own (it's not that great anyway) It's motherboard is x65 bit, it had 2 gb 800 mhz ram (my computer had the same amount but only 667mhz) it's processor is 3.00 GHz (mine is 2.3 GHz)So basically it's a better computer for the main parts. I've not looked at the PSU but I'm sure it's better aswell. The only thing that isn't better is the graphics card. It's a 7 series while mine is a 9. So, basically I want to put the best of my computer to this better one. Mine feels newer (since I keep it dusted so it sounds really smooth, while this one sounds a bit old. But either way I want to install windows on it. The only problem is that the BIOS is inoperable. When loading into the BIOS the keyboard no longer seems to work. Its light go off. But every once in a while on trying, I can get it into the boot menu so I can move it to put from CD rom. But at this point, no matter what, it won't let me scroll through the options.So naturally I went to google and came with some results that it could be the BIAS needing an update OR taking the CMOS battery out and allowing it to load default values. I tried the latter first, overnight actually. This brought it to default settings, but no luck. It didn't help the keyboard. Now, I'm on the "update BIAS" part. But I can't even seem to find the right update for this motherboard. I tried installing CPU-z but this Windows 8 needs framework to run the software since it's not made for W8. So I just look around on the MB myself and find the Model Number. It's D33C98. I googled it and mostly game up with Gigabyte results but I can't find BIOS updates for this model anywhere. I see manuels but I can't find much of anything for this MB.I thought about just putting the HD in my current computer and loading windows 7 on to it and putting back in the other one so I could just use my computers BIOS, but I've heard this isn't the best thing to do.
View 9 Replies View RelatedA friend of mine's computer stopped working a few days ago. When turned on they only get a message to change the boot sequence or insert boot media.
I took out their HDD and attached it as a external to my computer. I then backed up all their files (the drive appears to be working fine.) not being sure what the issue was I decided to reformat the drive and re install a clean version of win 7.
After finally getting the drive completely erased I reformatted as NTFS and installed it back into the computer. At this point The bios did not recognize any HDDs or optical drives (I had the win 7 disk in the DVD drive).
I created a bootable USB win 7 disk which the computer did recognize and initiated set up. At this point the set up process does not recognize any drives.
Not sure what to do to get it to recognize the drive. My initial thoughts are formatted incorrectly.
I was running Windows 7 ultimate x64 on my system (specs below), and I usually let my computer go into hibernate as it does that automatically after some time of system inactivity. Usually it will boot back up with no problem but then last week I tried to boot it up, it crashed and said system error.. I can't remember everything it said as it was obviously coded; since then I haven't been able to bring up the same warning screens.
Instead what happened was I reinstalled windows 7 on the same drive, formatted and all, and after installation it would finalize my settings, etc. After which, it would do a final reboot and, after bios goes, the computer hangs on a command prompt type screen with just a flashing underscore. Asking my family members, they proposed it might be a hardware issue so I bought a new hard drive (Seagate Barracuda 1tb.. not sure if that matters) and tried installing windows on that drive; same exact problem.
I also tried different combinations of RAM with my board, including just one stick of RAM, tried taking out the video card, tried taking out the sound card, etc. No dice. So my dad took his drive from his computer, that has an install of VISTA x64, and I plugged it into my computer and it worked perfectly. Conversely, I plugged my drive with the Windows 7 install into his computer and it also worked perfectly. We tried playing around with a few settings in the BIOS, etc. but nothing gives.
SPECS:
MOBO: Intel DP45SG
Chip: Q6600
Ram: Hynix 2x2gb and 2x1gb kingston
Vid card: Zotac GeForce GT 610
Sound: Creative X-Fi Xtremegamer
BIOS: Should be up-to-date, irregardless it ran Windows 7 before
I'm trying to install Windows 7 on a Compaq Presario 2100 laptop with 1GB of RAM and known good HDD. I ran memtest 86 for 12 hours with no errors.The BIOS sucks and has no options for ACPI, power management, or even serial/parallel port addressing, only boot order, system info, and password. The only device option in the BIOS besides video memory (tried every setting there) is legacy usb support (tried that too). I've been googling for 2 hours about this and found the whole F5 and F7 thing for XP, but I'm not sure if there's a similar option in 7 to only use Standard HAL. There's no Press F6 prompt in 7 install to press F7 at.
View 1 Replies View RelatedIm installing a new SSD and i wanted to use it as an oppertunity to change everything over to AHCI and wanted to clarify one thing before i went ahead. Im going to change the setting to AHCI in the bios and then install windows 7 on the SSD. Once i get into windows i was going to plug in the old Hard drives. With the old hard drives being used when my computer was on IDE will they be able to be read or will all the data be lost.
View 1 Replies View RelatedI'm loading a new system and encountering a problem I haven't seen before. I have a Gigabyte Z77MXD3H motherboard with an Intel i5 3570 proc. When I boot to the Windows 7 install disk I get the BIOS splash screen, then the monitor goes so dim I can't read any text during the boot process but I can tell there is text on the screen. The monitor's menu also appears so dark its unusable. After some time the text mode finishes and the Windows install menu pops up and everything returns to normal. I can find loads of posts about black screens after windows boots, but not before.
View 1 Replies View RelatedI have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies View RelatedSo im having issues with my PNY 8gb Flash drive that im trying to use to install 7 onto my desktop. The problem is that whenever I insert it into my computer and try and boot off it, (Clean install btw) even though the bios menus detect the drive when I boot it acts as though it didnt insert. I need my desktop.
View 6 Replies View RelatedI have Dell Inspiron N5010. I was using windows 7 home basic 32 bit os. I wanted to change it to windows 7 ultimate. So I have inserted windows 7 Installation disk into CD drive. Then I went to through the installation and I chose the Custom as the installation type.When the partition page appeared, I have formatted all the disks including C which contains windows files. Then I got 298 GB unallocated space. Then I split them in to 4 partitions. Then I have selected one partition to install the windows. Then installation started .
Copying windows files succeeded. Expanding Windows files(0%) is still be like that for 20 minutes. Then I got the error message like: "Windows cannot install required files. Error code 0x80070017". And I thought it would be the installation disk problem. But it works fine in other systems. I tried several disks. No use. Also I got another problem. When system boots I tried to enter into BIOS using F2 and F12 which was mentioned in screen. But it did not enter into the BIOS, Instead it goes to the installation.
Can I install a 32 bit program on a Windows 64 bit system by turning on a function in the Bios.
View 2 Replies View RelatedI have changed the ram and that fixed most NOw this one when w7 starts it looses parts like no disc drives no device manager no modem and so its a restart and they return untiull next time then it all stops again.some programs run slow internet pages are real slow changeing.I cant install word packages it crashes and now on install it comes up with cant find network.
View 6 Replies View RelatedCisco EAP-FAST Module is on my Programs file but when I 'search device',Windows can't find it.
View 9 Replies View RelatedCan't find DVD driver for new Windows 7 install. During initial Windows 7 setup, it says it needs a DVD driver but I can't find one for my Samsung SH-222BB/RSBS.
View 13 Replies View RelatedAfter an attempt to dual boot my system with 32 bit OS, I couldn't boot back into 64, it wasn't even an option. So, I figured I must have messed up the install and it was time for a clean one. Now I get an option to dual boot windows 7 or windows 7 (recovered).
Recovered is the one I want, but if I switch my boot HDD to the one that Windows 7 (recovered) is on, bootmgr is suddenly MIA.
I have not a clue how to restore it, and I even wiped the second HDD clean.
I recently read an article about using a USB thumb drive to install Windows 7.Set Up a USB Drive as a Bootable Device to Install Windows 7 IT Professionals.I would like more information about how to do this. After reading the article the questions I had were:Where do I get the Windows 7b ISO file? Can I make it from my present install disk or do I have to buy it? How do I setup my bios to be able to install from a USB device? I am not sure that is possible on the PC I have.
View 7 Replies View RelatedWindows 7 works fine, except some things. But I wanted to reinstall it after I updated my BIOS from 1.1 to 1.8.
After it loads my working install dvd, it gives me BSOD with stop code 124
Its the same problem he has: windows 7 crash on install bsod stop 0×00000124 - Windows 7 Forums
But i'm in another situation.
Maybe I could downgrade my BIOS, but I don't know how. Or maybe ill just have to change a BIOS setting.
I have computer with Phoenix award bios utility v1.3 (945 platinum w7176ims v1.3). Im trying to install windows 7 but I keep getting "a required cd/dvd drive device driver is missing." this is after I press install now. Im stuck in select the driver to be installed window. I have 2 hdd 1 is 500gb and the other is 130gb. I try to browse and select the c drive or the d drive.
View 9 Replies View RelatedI am attempting to install Windows 7(32) onto my computer (currently running Windows Vista32). I have been unable to do so because the setup claims that I have no harddrives in which to install windows. It will not detect them during the installation process.
The compatibility check states that my computer is capable of running Windows 7(32) I am curious if there is anything I could do to get the installation to detect my harddrive.
My computer specs are:
Nvidia GTS 450
Intel Quad CPU Q6600 @ 2.4Ghz
4.00gb Ram
Dell XPS720
PLDS DVD+RW DH-16A6S SCSI CdRom (driver up to date)
I attempted to format my C: as well, as per a friends suggestion, and was unable to do so recieving an error message stating "system partition is not allowed to be formatted" . I do not recall partitioning my system.
I have a laptop with Windows 7 x64, I re-partitioned my drive in Disk Management (shrink) and now my system won't boot.
Here is what happens:
1. Acer Splash Screen
2. Small blinking cursor.
3. Rinse, repeat (Acer screen again!)
When I try to boot from Windows 7 DVD, I get CDBOOT: Could not find BOOTMGR.
I just switched form Win 7 32 bit to 64 bit. I performed a backup and was able to get 64 bit installed and working properly, however I can't find my backup of MS Office 2010.I've looked through my backup and also Windows old file and can't seem to find it. Will I have to reinstall Office from the disk?
View 1 Replies View RelatedWhere can I find drivers to install HP Deskjet 895Cse on my window 7 64 bit pc.
View 1 Replies View RelatedI have just bought two brand new WD 500 GB RE4 HDD's and connected them coorectly for RAID 1. I have changed the BIOS and Pressed Ctrl+F to create the RAID and this has been successful. When installing Windows you obviously get to the aprt where you need to load the floppy drivers to locate the drives...
I have downloaded ever driver from the Gigabyte support drive and loaded them onto a USB, not one driver can be seen when the USB is "Browsed" too...
How important is it that the drivers are on a floppy, as I do not have a floppy drive or access to a floppy and drives. Also what driver should be downloading as I tried the 3.2.1540.17 one and that was not seen, so I just downloaded them all in an attempt for success.
I just installed a new hard drive. How do I find the hard drive partition to install my new windows 7. I am dot seeing the hard drive
View 3 Replies View Relatedi tried to install win7 in dell laptop, setup can not find harddrive, took out format it with pc, now ntldll missing
View 3 Replies View RelatedI've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
