I saw anohter thread like this one, but it was stupid :P So I'm trying to install a computer game, and when i run Setup.exe, it says "Do you want the following program from an unknown publisher to make changes to this computer?" I click Yes, and thats it. It goes away and nothing happens. The hourglass shows up for a second and nothing happens.
View 1 RepliesOk, I tried to install Windows 7 a while back, and it would freeze every time during 'expanding files' section. I also run into similar problems when it comes to installing Vista. I've gotten Vista to install maybe 2 times and both times it ran fine for a little then it refused to boot (not sure where in the process anymore).I checked the Windows Vista / 7 compatibility guide on Microsoft's page and everything i have SHOULD work, so I'm not thinking its hardware issues.I read another post on these forums that had someone saying it worked when they swapped out the dvds when it froze. I don't believe its the disc either, because both Vista and 7 had no problems installing on other computers that i tested it on. Running a Virtualbox with 768mb RAM assigned to it installed flawlessly as well.Why does my install keep freezing on the machine I plan to activate Windows with, but not on any other?
View 4 Replies View RelatedCan you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.
View 9 Replies View Relatedwhy my laptop do not install
View 3 Replies View RelatedI'm trying to uninstall a program (GTA4/Grand Theft Auto game), but the setup for this game does not work on Windows 7.
To make the setup work we need to edit the compatibility for it.
It's the same problem to install the game, the same error "incompatible with %P". The solution to install it's the compatibility mode.
But I don't know how to change the compatibility to the uninstall setup. The setup.exe, I don't know where it is, when I click to uninstall the system always generate a setup.exe on a temp folder like:
C:UsersSauloBAppDataLocalTemp{E5FDAAC7-1D94-43B7-BB89-F0762501AD15}setup.exe
The {strings} always change. So I cannot edit the setup to open on compatibility mode.
Does anyone know how to change the compatibility for setups on the uninstall list?
Btw, there's no uninstall shortcut on the game start menu
I recently read an article about using a USB thumb drive to install Windows 7.Set Up a USB Drive as a Bootable Device to Install Windows 7 IT Professionals.I would like more information about how to do this. After reading the article the questions I had were:Where do I get the Windows 7b ISO file? Can I make it from my present install disk or do I have to buy it? How do I setup my bios to be able to install from a USB device? I am not sure that is possible on the PC I have.
View 7 Replies View RelatedOK, trying to put windows 7 on a motion m1300 tablet. 1gig ram 1ghz cpu and 60gb hard drive. due to the bios being limiting install from xp desktop is impossible, so using an external disk drive i am trying to do a clean install, but it just stops at setup is starting, i know that seven will run on these, seen it with my own eyes, but i cannot get setup past this part.i have a feeling its the graphics driver, but getting into device manager from the language screen/ click here to install screen hasnt worked. its not in the system32 folder and so i dont know where to lookedit: before its asked, yes the disk is good, and i cant use a usb because the bios wont alow it. also the bios are up to date
View 8 Replies View Relatedupdate for setup for install intel(R)core(TM)i3 Cpu M350 @2.27GHz
View 2 Replies View RelatedWhen I install windows 7 on my regular hard drive it is fine. When I try to install it on my ssd drive it says that windows setup could not configure windows to run on the computers hardware, why???
View 2 Replies View RelatedI am having trouble installing windows 7 (home premium) on my new raid array (2x intel 330 120GB SSD in RAID0). Basically, windows CAN see the raid volume. it recognies that there is a single 223 GB volume available. I select "Load Driver" for the volume, and plug in my trusty USB with the appropriate intel SATA RAID drivers. Win7 recognizes that there is a compatible driver on the USB, installs it, but still says: "Windows cannot be installed to this disk. This computers hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu". The format and create new partition options are grayed out for this volume.
Using the Intel Rapid Storage Technology tool, I combined the two drives into a raid0 volume. This is confirmed because when I restart, the raid volume shows up in the RST echo with the right size, and also indicates that the volume is bootable. It is also confirmed because the windows 7 setup only sees one 223GB disk. I have confirmed that in the BIOS, the SATA controller is set to RAID mode (not AHCI). I have confirmed that in the BIOS, the first boot option is "RAID intel SSD". I've tried the RAID drivers that came with the motherboard, Ive also tried the raid drivers available from intel and the latest raid drivers available from the motherboard MFR.
ASROCK extreme 6
Intel Core i7-3770k
16 GB RAM
2x intel 330 120GB SSD
NVIDIA GTX 680
Basically my problem is I cant install anything. I have tried to install several different software in the .iso format and none of which are installing. On every installation I get a message saying 'Setup has stopped working, windows is checking for a solution' then it tells me 'Setup has stopped working' and gives me an option to close program.
View 3 Replies View RelatedI just purchased a new HP laptop that has Windows 7 Home Premium install setup on the hard drive. I started and completed the installation. But I don't remember during the install asking me for an Administrator Name & Password. After the installation was completed I did the Recovery Disks, but have not yet rebooted the laptop. When is the Admin Name and Password created? I remember seeing a Rick-PC during the install, but I don't remember it asking for me to input a password. Am I fretting prematurely, or do I need to reboot, or can I use the Recovery Disks to start over?
I've been using an old PC with Windows XP. And I checked out 3 books on Windows 7 at the Library.
I have downloaded windows 7 home premium upgrade ISO from the microsoft store. The burned the iso to disk using the image burner in windows.
My problem is that the disk will boot, and a "windows is loading" screen appears which only takes a minute. Then a windows background appears on screen with a cursor. That is all. No setup at all. What might be wrong here. I would like to make a bootable disk that works.
I can run setup from an OS, but that is not what I want to be able to do.
I am having trouble installing .net framework 4. I had it before but when installing security updates it would fail, so I thought I would just uninstall and reinstall it again. But now I can no longer install it again. When ever I double click the setup.exe it does not run. It doesn't do anything.Here is what I did before coming to this forum:Virus scan: microsoft security essentials, ad-adwareSFC scan: no errorscheckdiskregister and unregister windows installeruse many microsoft fix it that includes repairing windows update, msi, etc
View 1 Replies View RelatedHow to Install and Setup a SATA Hard Drive ?
View 0 Replies View RelatedHow to Install and Setup Virtual Windows XP Mode in Windows 7 ?
View 0 Replies View RelatedI am attempting to install Windows 7(32) onto my computer (currently running Windows Vista32). I have been unable to do so because the setup claims that I have no harddrives in which to install windows. It will not detect them during the installation process.
The compatibility check states that my computer is capable of running Windows 7(32) I am curious if there is anything I could do to get the installation to detect my harddrive.
My computer specs are:
Nvidia GTS 450
Intel Quad CPU Q6600 @ 2.4Ghz
4.00gb Ram
Dell XPS720
PLDS DVD+RW DH-16A6S SCSI CdRom (driver up to date)
I attempted to format my C: as well, as per a friends suggestion, and was unable to do so recieving an error message stating "system partition is not allowed to be formatted" . I do not recall partitioning my system.
I am trying to install Windows 7 enterprise. When it gets to the step to enter the computer name and usually at that same step you setup the username. This installation does not have that step and when I click next it finishes the install reboots and brings me to the login screen. I can log in because there is no username or password set.
View 2 Replies View RelatedI can,t get past the keyboard setup when installing windows 7 on a toshiba satellite p200-rt2
View 4 Replies View RelatedI would like to know on my new build 120 SSD and a 3T HHD so that I can install my games with most of the files are on the HHD and the games startup with the 120 SSD with the OS installed on it?
View 8 Replies View RelatedI have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration. After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. "No signed Driver Found, Please insert CD/DVD/ Floppy", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.
After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed "during" the Windows installation. Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??
I have a home premium (custom built) i didn't build, i also want to format hard drive. When i put disc in, it doesn't load the windows 7 ultimate install setup, why?
Specs
500gb hdd
4gb ram
i5 quad core
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
after formatting my sony vaio vpcee2m1e, using a Bootable USB (win7, 64x) it stops at -setup is starting service.. I have tried booting with a CD and It gives random error msg at various stages during installation.
View 2 Replies View RelatedI tried to dual boot Fedora 18 with my Windows 7. They are on two different hard drives. Fedora 18 worked but I was unable to boot up Windows 7. Frustrated, I decided to just delete everything from all the hard drives and try to do a clean install of Windows 7 using the USB-DVD Windows tool to make a USB Windows 7 installer. I then got the following error when trying to install Windows onto my hard drive:
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
I tried unplugging the other hard drives and got the same error. I also went to the command prompt and used Diskpart and did clean all. Still the error shows up. Something that might be useful is that when I did disk list in the command prompt it showed my hard drive but with 0 free space. Not sure if this is useful but the drive I want Windows 7 on is a solid state drive but the one I had Fedora on is a normal hard drive and I had an extra harddrive that I used for storage that is a normal hard drive as well.
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
View 2 Replies View Relatedwhenever I try to install a game or program (happens more often for games), the setup process freezes at random intervals. Not the kind of freeze where it crashes or gets the 'not responding' error message, but I can't click anything or advance to the next part of the setup until it goes away. It's really strange, and only started happening two weeks ago. I'm running Ultimate 32-bit.
View 7 Replies View Relatedi tried to install win7 in dell laptop, setup can not find harddrive, took out format it with pc, now ntldll missing
View 3 Replies View Relatedone of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies View RelatedWhen I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies View RelatedI purchased my laptop in January and I'm not really sure what happened, I must have been struck by a pretty bad virus or something because I had a lot of protection and ran regular scans. But anyway, one day I booted up my computer and it said error recovery or something a prompted me to repair my pc but I choose start windows normally, and it loaded normally but just before it could get to the login screen a blue screen error flashed for a split second then my laptop restarted and took me to the error screen again. when I try repair my computer, it takes me tow blank lie screen,ole the login screen, with a cursor in the middle, but no dialog box. I left this running for up to 3 days, so it's definitely not just loading. so I decided my computer is pretty much screwed, and searched for my installation disc it came with. (windows was already preinstalled so I'd never used it before. on startup I pressed f12 and booted from cd rom, then it said press any key and took me to a loading screen, which took about 5 minutes and then to the installation screen. I said my language is English, choose uk English etc. then it says install now or repair your computer. when I click the repair option, I am taken to the same blank blue screen from before. when I press install it says setup is starting... and the loading cursor is spinning, so I know it's not frozen. I left it for half an hour, tried again, and this time left it for 11 hours, but still no setup has started. there can't be anything wrong with my disc, I'd never taken it out of the packet before, and I was very careful not to scratch it. it's a dell operating system windows 7 disc for if you need to reinstall windows on your preinstalled pc.
View 1 Replies View Related