I recently bought two Sandisk SSD's to run in RAID for my rapidly aging computer. I'm currently installing windows 7 (x64) on my new drives and I get the "no device drivers found" message that has haunted me in the past. I remember previously I resolved this issue on my Samsung F1 by setting the drive configuration in my BIOS to IDE, of course, this is not possible now as it must be set to RAID.
View 4 Repliesi bought a new dell inspiron n 5010 and i have downloaded windows 7 professional(64 bit) from the MSDNAA account and burned the image on the DVD.In the bios of my laptop i set the sata mode to ahciwhen i try to install windows 7. it loads file completely but after install and next button click a dialog box appears with some message as "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok."That message gives me 3 buttonsok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse i have tried to find those missing drivers but without succeed
View 2 Replies View RelatedNo device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK.
Windows XP-32bit > 7-64bit
I have now spent many hours now on this and this is the latest error message i get after redownloading and going through all this malarky. I am getting very frustrated and heartly sick of MS. They are every example of a monopoly for the economist and will be for years.
It is an absolute disgrace that they never even got 10 students to try and download when they uploaded; it's just basic. The money I have spent buying it have been long exceeded at a personal cost in time. I feel cheated.
have an aspire 7560-sb416, when i turn computer on i get: check cable connection!
View 1 Replies View RelatedI bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
I got a start up error no device drivers found.
View 5 Replies View RelatedI have a HP ML110g5 server which I have disconnected the smart array and connected a HDD via sata directly to the motherboard.when installing windows 7 "No device drivers were found etc."does anyone know where I can get the drivers (I assume for the HDD) so windows will recognise where to install windows.Bios does recognise the HDD.the HDD model is 9ca152-784 by seagate
View 1 Replies View RelatedI purchased a drawing tablet that connects via USB to my windows 7 machine. I installed the drivers and I see the proper ones on Device Manager. Yet after it is installed, Windows 7 does an extra step and searches for the drivers. It says that the drivers could not be found. But the drivers are installed. I am looking right at them. I uninstalled that "unknown other device" manually from the device manager and restart the computer. The device works. The computer recognizes the drawing tablet and it works for a little while. But again, Windows 7 begins its automatic search thing. It does something that makes the tablet not work anymore.
View 3 Replies View RelatedWhen I click "install now", I get a msg box that is saying 'no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK'.
View 9 Replies View RelatedI recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new copy of Windows 7 Home Edition. When I got home I plugged the hard drive, a SATA drive, in and popped the install disk in, only right after I got to the "Install Now" button and clicked it did I get this message;No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OKFollowed by;A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step
View 7 Replies View RelatedSo, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
View 9 Replies View RelatedI'm trying to create a dual boot with win7 and ubuntu. I want to install win7 first and then the other os. So, using Gparted, if I create a partition, formatted or not, win7 setup will not recognize my hdd and i get the above error message. "No device drivers found". If I set my hdd space as unallocated, it gets recognized, but setup tells me it's unable to install windows into any of the drives. No further information is delivered.
The thing is I can easily install ubuntu and set it up. So there's nothing wrong with my hdd. Why would windows not recognize it and request for the drivers? I went to the Hitachi website, but they tell me there are no drivers available, since all OSs already have that information. I wonder why I'm having such a hard time installing win7. Ubuntu clearly works and installs smoothly and no errors occur.
More info:
- Installing Windows 7 Ultimate 64bit
- HDD (500gb) is empty, expect for one OEM recovery partition (12gb)
[code] So I get the Comp built, and did not have a windows iso yet, so I put Ubuntu 11.04 on it. When I tried to put on Windows 7 64-bit, via live USB, I get to the Install Windows button (very early in the process), before it gives me the error LOAD DRIVER: No device drivers were found. Make Sure the installation media contains the correct drivers, and then click OK.So I can browse for drivers, and I have downloaded the Windows drivers for the Sata and AMD 970 chipset from Gigabyte, but the install windows screen does not pick them up. I hit browse and then find the folder i saved them in and hit ok, yet it finds nothing.My bios have been changed from AHCI to IDE with no luck.
View 1 Replies View RelatedI have an aspire 7560-sb416, when I turn computer on I get:
" Check cable connection!
Pxe-mof: exiting Intel pxe ROM.
No bootable device."
I have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.The only USB devices that work are the keyboard and mouse.I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
View 5 Replies View RelatedI'm trying to install Windows 7 64 bit on a newly built PC; All pieces are brand new. While trying to install Win 7, I get past a couple of screens then I get stuck at a "Select the driver to be installed." screen. Whenever I click on any of the drives showing up I get an error message that says Load Driver "No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
I have the bios set to boot from CD/ROM first, Hard disk second, and USB third. The bios reads the hard drive as the correct 1 TB that it is. The "OnChip SATA Type is [Native IDE]." I have checked and double checked that things are plugged in correctly, but do tell me if its still possible I did something wrong. I have also tried booting with a copy of Windows XP that I had laying around but that gave me an error about "unable to partition drive."
I am planning to buy a 5.1 speakers but this is my situation.I have my pc setupped to my 107cm LG TV via hdmi cable ..sound is comming from the tv (ofc) i was thinking now about those 5.1 speakers..but also will they work on my configuration?
View 1 Replies View RelatedOk, so I just added Windows 7 to my lineup. After an epic battle with permission problems between XP and 7, I finally managed to fix it and have moved on to a slightly more odd yet annoying problem- my dual monitors.
The way I used to have my monitors set up was my monitor on the right had my task bar and icons... but the monitor on my left was the main monitor. That way when a program opened it would open on my left monitor (which is right in front of me) while still allowing me complete access to everything under my taskbar and all my icons to my right.
Is there any way to do that in Windows 7? When I select "Make this my main display" it moves the task bar over to that monitor, which is annoying. Any suggestions?
Note: for those of you curious on how to do this in XP or Vista- pick the monitor you want to be your main monitor (the one programs open on) and pick the one you want to have your taskbar. Let's use my setup- main monitor on the left/Task bar and stuffs on the right).
- Go to display, right click on the right monitor and uncheck "attached". This will turn it off. Now all you have is the left monitor with taskbar and stuff all over it.
- Right click the right monitor again. Check "attached" AND "Primary". Click apply. Right monitor turns back on. Everything refreshes and task bar is on the right monitor.
- Right click left monitor and click "Primary". Task bar + icons are still on the right monitor, but now all programs open on the left one.
I woke up this morning to an icon on my laptop desktop screen. It's called deskto configeration settings and after some looking around on the net I found sevealtutorials telling me how I'm not to delete it ut try and hide it.I've followed te insructions but when I go into the 'folder options,view, dnt show hidden folders. the box is already checked...
But when I lick on the icon propeties it says the icon isn't hidden.
only saw this thing on the screen"no default or ui configuration directive found!"i m on the way find the way to solve this and also hope can get solution from here.
View 3 Replies View Relatedi got a toshiba satellite p775d and for some reason, the bios won't allow me to change any settings. it isn't asking for a password or anything like that, it just won't let me navigate to the appropriate parts of the bios gui in order to adjust the configuration. i tried flashing with the toshiba support utility, it won't permit it since the bios is the same version apparently. the bios manufacturer website utility won't permit a flash either, it only reprograms the blocks. do i have to take it into a professional?
View 4 Replies View Relateddriver corrupted on my printer windows 7
View 1 Replies View RelatedI've a samsung with some extra samsung features (samsung update plus, speed up manager, recovery system etc.) and they bug me. Therefore I wanna do a clean installation on my laptop but when I boot up on my USB (works fine) I get the following message "No device drivers were found ..." instead of having access to the partition manager.Btw., I've tried the to boot other laptops with the USB stick and it works like a charm. I read somewhere that the problem could be that my laptop didn't load the SATA drivers, which is needed for the partition manager, that might be the problem but I don't know where to find the drivers though.Furthermore I've noticed that I can't see my USB drive when I browse for files only C:/ (system disk), D:/ (primary), E:/ (some recovery disk) and X:/ (boot)?
View 5 Replies View RelatedI just bought a new system and built it myself and was pleasantly surprised to see that it started up ok..now im trying to install windows 7 64-bit from a DVD and I get this message:"No signed device drivers wre found. Make sure that the installation media contains the correct dirvers, and then click OK."I went to ASUS's website and dl'd my HDD's driver and put it on a USB. The installation recognized it and I assume used it but I still have this issue. Basically when I go to select were I want to install windows, there's nothing there.I don't have a 4GB USB and was hoping I could fix this w/o one - I do have a phone with like 10GB storage but I think you have to wipe everything to install windows from a USB.....
Here's a list of my specs:
ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
HITACHI HDS721050CLA362 (0F10381) 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
GIGABYTE GV-N560UD-1G GeForce GTX 560 Ti (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML8GX3M2A1600C9W
ASUS P8Z68-V/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 ...
Lets see if anyone can solve this one for me. Working with : ASUS M4A87TD EVO - BIOS version 2001 (latest) RAM - Corsair DDR3 4x4GB CMZ16GX3M4A1600C9 (CPU-z says max bandwith is 667Mhz) Never had an issue until the day I changed the BIOS settings for the RAM to operate at 1600mhz. Playing CS GO and eep getting random crashes or freezes that send me through the reset cycle. requency is set at 1600Mhz and Timing row is set at 41 like it should be. Voltage stays the same 1.50V --->1.500V - wondering if setting the voltage to 1.65Vthats something I should stay away from. Rechecked made sure I had latest Bios, reflashed just to be on the safe side and still am having issues. I know there are no error screens or any sort of overheating going on, checked components and updates. all is in the green.
View 5 Replies View RelatedI have a Z68 AP D3 gigabyte mother board with Smart Responce capable. I have a 1 t sata HD and a 64 SSD. Trying to set up Smart Response.
Gigabyte show a simple video to make it work. But not working for me. As soon as the bios are set to xHD, my windows no longer works. It say operation system is missing. But after change back to AHCI, windows works again.
Installing Intel Smart Response also cause Windows to crash. At boot up, the intial 4 lights that forms the window logo at boot up freeze, then the death blue screen shows up. Need to repair windows again.
Tried setting bios to xHD and install new windows, but windows cannot recogize any of the HD while on xHD. Drivers for RAID found on my motherboard CD does not work either.
Tried to change cables to Sata 3 port only, also not working. Sata port 2 also not working. why cant' my system read xHD configuration? Am I missing a module or hardware?
i changed a Bios setting on my Toshiba Satellite Pro L640 now my laptop won't post and keep going to the internal recovery utility?.
View 4 Replies View RelatedOn a Toshiba LX835 all-in one, is there a way to set Bios Auto On after power outage? It seems like the BIOS on most computers allow this, however, the option is not obvious in the power management section of the BIOS for this model.
View 1 Replies View RelatedI pop in my Windows 7 disc (that I got from a friend - it's not a legal copy), and I get to the drivers section. How/where do I get drivers for this? Also, I have the motherboard and gpu cd's - and it won't recognize any drivers from them. *This error comes up "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
View 1 Replies View RelatedI formatted my Hard drive and now it says n"No device drivers found" - what drivers do I need for Acer Aspire X1301?
View 1 Replies View RelatedNew system build with Gigabyte GA-990FXA-UD3(v1.1), AMD FX8350 4.0Ghz/8coreVertex4SSD, Gigabyte GeForce GTX660 2GB video, 500wPSU, Win7 Home Premium/64.System ran/loaded/updated fine for about 6 hours then crashed during game play.BIOS/Windows unable to recognize SSD, unable to re-install Windows - get as far as "No drives were found. Click Load Driver to provide a mass storage driver for installation"that is followed by:"To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK"I have burned CD\DVD's and USB flash drive files for a couple of days now looking for the "device driver", but I still hang up at the same screen.I have switched SATA/power cables, reseated memory (crucial Ballistic 2x(2x4)DDR3 PC3-1(16GB total)/video card, installed a WD Caviar Black 1T HDD (not recognized), (re)Flashed the BIOS to F9 from the Gigabyte sight (system had the most current version/flash was successful - no problems with that)but.
View 3 Replies View Related