5.1 Speakers Setting Up On Configuration

Feb 16, 2011

I am planning to buy a 5.1 speakers but this is my situation.I have my pc setupped to my 107cm LG TV via hdmi cable ..sound is comming from the tv (ofc) i was thinking now about those 5.1 speakers..but also will they work on my configuration?

View 1 Replies


ADVERTISEMENT

How To Enable 5.1 Speakers Configuration

Mar 25, 2011

How to enable 5.1 speakers configuration

View 1 Replies View Related

Odd Configuration: Setting Up Dual Monitors

Nov 1, 2009

Ok, so I just added Windows 7 to my lineup. After an epic battle with permission problems between XP and 7, I finally managed to fix it and have moved on to a slightly more odd yet annoying problem- my dual monitors.

The way I used to have my monitors set up was my monitor on the right had my task bar and icons... but the monitor on my left was the main monitor. That way when a program opened it would open on my left monitor (which is right in front of me) while still allowing me complete access to everything under my taskbar and all my icons to my right.

Is there any way to do that in Windows 7? When I select "Make this my main display" it moves the task bar over to that monitor, which is annoying. Any suggestions?

Note: for those of you curious on how to do this in XP or Vista- pick the monitor you want to be your main monitor (the one programs open on) and pick the one you want to have your taskbar. Let's use my setup- main monitor on the left/Task bar and stuffs on the right).

- Go to display, right click on the right monitor and uncheck "attached". This will turn it off. Now all you have is the left monitor with taskbar and stuff all over it.

- Right click the right monitor again. Check "attached" AND "Primary". Click apply. Right monitor turns back on. Everything refreshes and task bar is on the right monitor.

- Right click left monitor and click "Primary". Task bar + icons are still on the right monitor, but now all programs open on the left one.

View 1 Replies View Related

Setting Speakers To Mono Instead Of Stereo?

Jul 19, 2012

i listen to some lectures on Internet, and they were recorded in mono, such that using headphones i hear them only on one ear. is there an application or a tweak that can temporarily produce mono sound instead of stereo?

View 1 Replies View Related

How To Delete/hide Desktop Configuration Setting On Windows 7

Oct 21, 2012

I woke up this morning to an icon on my laptop desktop screen. It's called deskto configeration settings and after some looking around on the net I found sevealtutorials telling me how I'm not to delete it ut try and hide it.I've followed te insructions but when I go into the 'folder options,view, dnt show hidden folders. the box is already checked...

But when I lick on the icon propeties it says the icon isn't hidden.

View 1 Replies View Related

No Device Drivers Found - Setting Drive Configuration To IDE In BIOS

Jan 13, 2013

I recently bought two Sandisk SSD's to run in RAID for my rapidly aging computer. I'm currently installing windows 7 (x64) on my new drives and I get the "no device drivers found" message that has haunted me in the past. I remember previously I resolved this issue on my Samsung F1 by setting the drive configuration in my BIOS to IDE, of course, this is not possible now as it must be set to RAID.

View 4 Replies View Related

External Speakers Work, Laptop Speakers Do Not

Dec 12, 2009

I have a Dell XPS M1330 laptop and have recently upgraded to windows 7 professional (32bit) from windows vista. Everything seems to be running smoothly except I can get no sound from the internal laptop speakers. When I plug in external speakers in via the jacks on the front, sound comes through fine, but as soon as I unplug them there is nothing. Headphones also work like this too. Under sounds in device manager, it simply says 'High Definition Audio Device', and I'm not sure if I should be downloading some other drivers?

View 9 Replies View Related

5.1 Speakers But Test Signal Only On 2 Speakers

Dec 7, 2012

I have a Creative SB X-Fi Xtreme PCI-Ex, and Logitech Z-5500 5.1 THX speakers. All speakers work; all software, drivers and codecs are up-to-date. Recently I noticed that in the Speaker Setup screen, the test button only results in sound from the left and right front speakers.

I checked because after a VLC update, mkv files no longer played correctly in the 5.1 mode. Music played, but the voices were muted (while no speakers are muted, and all are connected). I have to select "2 front, 2 rear" Audio Device in order to hear the speech as well.

I have the same problem when playing movies in PowerDVD, where I have to select the 2-speakers setting in order to hear all the sound.

Note:

- Previously the test button did sound all 5 speakers

- The test button on the Logitech remote still sounds all 5 speakers

I have Windows 7 Professional, 32 bit.

View 1 Replies View Related

Get All Speakers Working With Logitech Speakers X-530?

Jun 9, 2012

only my front left and sub and main speaker work and if i put the cords in a different hole then only one will work and i got all of the in the right colour coded hole i have tride everything WHAT DO I DO!

View 2 Replies View Related

Is Realtech Speakers The Same As Logitech Speakers

Jun 13, 2010

my computer doesn't recognize logitech speakers, it does show realtech are they the same?

View 3 Replies View Related

"System Configuration Cannot Save The Original Boot Configuration For Later Restoration"

Nov 15, 2012

I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:

1. I restored computer to original factory settings (to rule out possible causes)

2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"

3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).

4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.

I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.

View 4 Replies View Related

F2 Configuration For Windows 7?

Oct 17, 2011

F2 configuration for window7?

View 1 Replies View Related

How To Reset IP Configuration

Oct 30, 2011

My Windows 7 tells me that " IP address has an invalid configuration" How can I reset it?

View 1 Replies View Related

64 Bit Windows 7 Configuration?

Feb 9, 2012

i want to install win7 64 bit, but um confused about my PC configuration i hav
intel Core i 3 3.06Ghz

Gigabite H55 mobo
2 gb Samsung ddr 3 ram
500 gb Samsung sata hdd
and liteon 24x dvd writer.

View 2 Replies View Related

Cd Rom Configuration For Windows 7

Sep 6, 2012

i have a hp pavilion all in one and my cd drive is not reading any of the discs that i put in. when i check the system it tells me thst the drive is running properly. what should i do?

View 3 Replies View Related

Best Configuration For SSDs And HHD

Dec 30, 2012

what is the best way to combine two SSDs and an HHD in a i5 system? P8Z77-v Deluxe, 16 GB 2100 Ram, i5 3.4, Seagate Barracuda 500GB, Windows 7 Ultimate. Want to buy either 2 Samsung 840 120 GB or 2 Samsung 840 240 GB.

View 14 Replies View Related

Can Applications Go To Different Speakers

May 4, 2011

My laptop has 2 plugs for headplugs, so I was wondering If i had 2 applications, for example, if I had a movie playing and music in windows media player, can the movie go to one headphone and the music to the other?

View 1 Replies View Related

No Sound From Speakers

Oct 15, 2011

i have an msi 785gtm-e45 mother board. i have no sound coming from the speakers. tried new speakers and still no sound. if i click on the speaker icon on the bottom right it shows the speaker graph going up and down as sound is being produced. i tried the head phones and nothing coming from them either. i tried playing a cd and nothing from there either. i first noticed it when i was trying to play something from Internet and thought it might just be the site but then i tried off line as well. i am running windows 7 home premium. i have checked all the settings i can think of but probably have missed something somewhere.

View 1 Replies View Related

Speakers Not Showing Up?

Jan 12, 2012

i recently purchased isound ice speakers. they are usb speakers, and also work on apple products. i want to watch a video on Internet, and i want it to be louder, but when i plug in the speakers, they don't work.they don't show up under control panel> sounds, even when i right click "show disabled and disconnected devices". they do however light up when i plug them in.

View 3 Replies View Related

Speakers Have No Sound?

Apr 30, 2011

my speakers have no sound coming from them because theicon down the bottom right handcorner of the screen there is an x through it it is windows 7

View 1 Replies View Related

Run 5 1 Speakers In Windows 7?

Sep 1, 2011

which audio driver can help me to run all my 5.1 speakers in win 7 only 2 running right now

View 1 Replies View Related

Why Are Speakers Clicking On PC

Sep 9, 2011

why are my pc skeakers clicking slow then fast then slow etc..I dont know if it is high cpu usage on somebody elses part or what

View 14 Replies View Related

How To Get The Echo Out Of Speakers

Sep 18, 2011

how do i get the echo out of my speakers (windows7)

View 1 Replies View Related

How To Set Up Mic So Can Hear Over Speakers

Dec 19, 2011

how can i set up my mic so i can hear over my speakers

View 1 Replies View Related

Speakers Are On But No Sound?

Sep 14, 2012

my speakers arent working on laptop i tried evetthing

View 1 Replies View Related

USB Speakers Not Working

Dec 1, 2009

Upgraded to 7 two days ago and cannot get anything out of them. Diagnostics tells me they are working and all drivers are up to date. I have tried designating them as default device and no sound comes out of the computer at all.

When I designate the internal speakers as default and then plug in the usb speakers, the internal speakers continue to work but nothing comes out of the usb speakers. Does anyone know if these are just incompatible with 7 or am I doing something wrong..

View 4 Replies View Related

Virtual PC Configuration Fails?

Aug 26, 2011

I have a new Dell E6520 running Enterprise 64bit. I need the virtual XP to run some older software. Following the instructions, I successfully installed Windows XP modeNext step is to install Virtual PC. The installation of KB958559 appeared successful, but when I restarted the computer it got to about 95% and reported configuration failure.

View 12 Replies View Related

Windows 7 HDD And Partition Configuration?

Dec 6, 2011

I put the XP disk in to have a look at the partitions before deleting them, but found the partition screen was confusing. My query is as follows:

2)There are 2 HDDs in the PC. When I got the PC, it had one Seagate HDD - W7 appeared in Windows on the C: drive and I placed applications there. Immediately afterwards I added a 2nd Hitachi HDD to hold data only, creating a single volume on it called G: data drive. This all seemed to be working fine until this current problem.

3) So, I thought I would see a C: �system� partition, or maybe a 100MB �system reserve� C: and another lettered part of that partition, and the G: partition/volume for data files (on the second HDD). However, what I saw on the partition screen via the XP installation disk was this:

476938 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] D: Partition1 (System Rese) [NTFS] 100 MB ( 75 MB free)
E: Partition2 [NTFS] 476838 MB ( 419213 MB free) 476938 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] C: Partition1 (data drive) [NTFS] 476937 MB ( 383546 MB free)

4) In the CMOS Features screen in the BIOS setup, the HDDs were configured like this (extract):

IDE Channel 0 Master [None]
IDE Channel 0 Slave [None]
IDE Channel 1 Master [Hitachi HDP725050GLA]
IDE Channel 1 Slave [None]
IDE Channel 2 Master [None]
IDE Channel 3 Master [None]
IDE Channel 4 Master [ST3500413AS]
IDE Channel 4 Slave [None]
IDE Channel 5 Master [Optiarc DVD RW AD-72]

The Hitachi HDD at channel 1 is the 2nd HDD, added by me after delivery to hold data files only, so I expected to see it below the Seagate HDD on this list.

5) Also, the Hitachi HDD was top of the Hard Disk Priority list on the BIOS Advanced screen. Again I would have expected to see the Seagate above the Hitachi in that list.

View 6 Replies View Related

Can't Change BIOS Configuration

Nov 14, 2012

i got a toshiba satellite p775d and for some reason, the bios won't allow me to change any settings. it isn't asking for a password or anything like that, it just won't let me navigate to the appropriate parts of the bios gui in order to adjust the configuration. i tried flashing with the toshiba support utility, it won't permit it since the bios is the same version apparently. the bios manufacturer website utility won't permit a flash either, it only reprograms the blocks. do i have to take it into a professional?

View 4 Replies View Related

Wireless Zero Configuration On Windows 7?

Jan 25, 2011

In XP, if one is playing something over the network on a wireless connection, there are usually (always?) little dropouts every so often caused by Wireless Zero Configuration service. So once its connected, simply disabling the service causes those dropouts to go away and playback is smooth and steady.Well, in Windows 7 I have those same dropouts over wireless but, no Wireless Zero Configuration service to disable. So what is the equivalent or what needs to be done to make it quite checking the connection so that playback will be as smooth as it is with XP?I've tried disabling a couple of sevices that were associated to wireless (WLAN Autoconfig) but so far I've only managed to completely bonk the connection.

View 4 Replies View Related

Boot Configuration Error !

Jun 3, 2011

I was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: BootBCD"

I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive �800 paperweight

To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the hard drive is screwed but there is clearly a problem with the boot sector and I have no idea on repairing it now.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved