I have a new Dell E6520 running Enterprise 64bit. I need the virtual XP to run some older software. Following the instructions, I successfully installed Windows XP modeNext step is to install Virtual PC. The installation of KB958559 appeared successful, but when I restarted the computer it got to about 95% and reported configuration failure.
View 12 RepliesI've seen several posts on this subject, but can't get enough information out of them to solve my problem. I have a new Dell E6520 running Enterprise 64bit. I need the virtual XP to run some older software. Following the instructions, I successfully installed Windows XP mode. Next step is to install Virtual PC. The installation of KB958559 appeared successful, but when I restarted the computer it got to about 95% and reported configuration failure. It then reverted changes (I tried to follow previous postings and ended up on a page "How do I reset Windows Update components." There was a statement that this page didn't apply to my version of Windows and I should go to the Windows 7 solution center. I had gone there previously and didn't
View 4 Replies View RelatedI upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies View RelatedHow to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies View RelatedHow to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies View RelatedHow to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies View RelatedHow to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies View RelatedI'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
Clean installing Windows 7 x86 is no problem. But
1) upgrading Vista x86 to Windows 7 x86 fails and automatically rolls back to Vista, and
2) attempt to clean install Windows 7 x64 results in BSOD when rebooting to finalize the process.
Any suggestion would be appreciated.
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
I am using MS Virtual PC v6.1.7600.16393.I had created a virtual machine on my system, which has been deleted now, but I have .vhd file created for that virtual machine.Now I am trying to create a new virtual machine by using the previous .vhd file.Unfortunately, when I start this newly created virtual machine, it asks to Insert Boot Media in selected Boot Device.I want to retrive few of my data stored in previously created virtual machine.
View 1 Replies View RelatedI recently built the computer that I am on and installed Windows 7 Ultimate 64-bit Everything's been working great and no updates have had issues installing until SP1 came out today. It fails every time with error code 80004005, unknown error. I am fairly certain that it is due to the Windows Mail hack. Unfortunately, I've already tried running the System Update Readiness Tool as well. As for trying the service pack install again, I have tried it multiple times, both through Windows Update and the full installation package downloaded from microsoft.com.
View 16 Replies View Relatedmy laptop recently just started to fail with failure in the video card (l4d2 vertical bar crash and same iwth Internet)and now i'm trying to recover by using hp recovery discs, but it's not working!!!it installs and then when it says "customizing software" it just freezes and hard-resets itself.then when i turn it back on, it says "setup is preparing computer for first use" then the welcome screen then an error message/sound -> "windows could not complete the installation. to install windows on this computer, restart the installation"and then it shuts down and restarts itself. is it possibly a hardware error? before the recovery i had video issues with computer constantly failing to load 3d games or even Internet at times.
View 9 Replies View RelatedSo i was trying to get my ps3 controller to work with my win 7 x64, installing some USB drivers.. when i rebooted, windows would immediately de-power all USB. nothing will even charge.. even in safe mode. I tried last known good config and nothing..
the devices work is BIOS and system recovery (win 7 cd in).
F2 configuration for window7?
View 1 Replies View RelatedMy Windows 7 tells me that " IP address has an invalid configuration" How can I reset it?
View 1 Replies View Relatedi want to install win7 64 bit, but um confused about my PC configuration i hav
intel Core i 3 3.06Ghz
Gigabite H55 mobo
2 gb Samsung ddr 3 ram
500 gb Samsung sata hdd
and liteon 24x dvd writer.
i have a hp pavilion all in one and my cd drive is not reading any of the discs that i put in. when i check the system it tells me thst the drive is running properly. what should i do?
View 3 Replies View Relatedwhat is the best way to combine two SSDs and an HHD in a i5 system? P8Z77-v Deluxe, 16 GB 2100 Ram, i5 3.4, Seagate Barracuda 500GB, Windows 7 Ultimate. Want to buy either 2 Samsung 840 120 GB or 2 Samsung 840 240 GB.
View 14 Replies View RelatedI know if you have os x you can download vmware fusion to emulate windows, but can it be done the other way around?
View 9 Replies View RelatedI have an intermittent problem with my Windows 7 programme installed on my laptop.
Very occasionally when I boot it will fail to launch stating that certain files cannot be found. I didn't record exact message but it is a system 32 file error.
I am able to reboot as the start launch is there, although it resembles the old 98 start launch, and it starts up again without issue.
I know it is vague but has anyone else experienced this? It affects me say 1 out of every 25 boots.
Using Laplink, PCMover, I migrated all of my files, apps, etc, from my old Dell laptop (windows XP Home Edition) to my new Toshiba Satellite L755-S5169 laptop,running on Windows 7. The transfer went fine, except, every time I try to go online, there is no wireless connection. I have to go through several steps to get on our wireless network, but, it fails again on reload. I cannot get online, yet, my old computer and our other laptop both get on our wireless quickly and easily. I want to put my old laptop away and rely on the new one, but
View 7 Replies View Relatedon my Win7 desktop machine, DNS lookups started failing, I can ping 4.2.2.2 .Ii can access my web servers by IP , but even nslookup replies 'No response from server" , tried server 4.2.2.2, server 8.8.4.4,I have tried multiple Name server settings, all other devices on my home network are doing fine, its like DNS is blocked, I have shutdown firewalls, flushed dns, registered dns, even onlined a different Ethernet card, Eset NOD32 runs clean, Commodo FW is clean, all VPN software is removed,y Ideas ? I am 20 yr comp geek so don't hesitate to suggest something complex this is strange, only on one workstation too. I think i have a glitch in the registry for the IP stack or some kind of dns client hijack is getting past my NOD32 and Windows security
View 3 Replies View Relatedexcess ie9 crashes prompted me to attempt a fix, i uninstalled ie9, updated the ie8 that was left after a restart, had the ie9 downloaded, after updating ie8 fully, tried to reinstall ie9, but installation aborted with Troubleshoot problems when you cannot install Internet Explorer 9 as my only recourse. i tried the fixit wizard, which just deleted adobe flash, but gave the same error message, and on rerunning it, said there were no errors to fix, so now i'm using firefox, ie8?
View 1 Replies View RelatedAlthough originally working, now W7 backup will not work.I am running 32bit UltimateI have emptied the backup drive,started a whole new backup - the back up starts ..uns to about 80% of progress bar ... then fails with message Backup failed to omplete.The error code is ox81000015This says that Windows could not zip a file... and to remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails
View 7 Replies View RelatedI tried to create a disk image using the Windows 7 feature. The creation failed with a message that chkdsk /r should be run on the source and destination HDs. Destination HD was error free. Source HD had bad clusters replaced in five files.Second attempt to create a disk image failed with the same message.There are no system symptoms, everything seems to be working as usual.
View 9 Replies View RelatedI have a Dell Inspiron 1721 connected to a new Seagate external hard drive.The Inspiron has 280GB of which 85 are free.The Seagate has 465GB with 445GB free.Several times I have attempted to back up the Inspiron and so far have been unsuccessful.The message I get is:Your last backup did not complete successfully.Windows Backup could not create a zip file. This could because the drive that Windows is installed on does not have enough space, or it could be a temporary error. Make sure you have at least 400MB of free space and try again.
View 1 Replies View RelatedI recently acquired a used computer and put the hard drive from my old one into the new one and it would freeze and at the Windows boot logo and then BSOD. The previous owner suggested that I get a new hard drive as the motherboard is having issues reading an already formatted hard drive. I decided to recover the bootloader by following these steps: [code] You will need to replace C:\ in the example below with the letter for your boot drive! It's most likely C:, but it could be something else!attrib -h -s C:\boot\BCD..Now it takes me to the Windows Boot Manager and says that winload.exe (0xc0000428) Windows cannot verify the digital signature for this file.
View 3 Replies View RelatedAlthough originally working, now Windows 7 backup will not work.i am running 32bit Ultimate.I have emptied the backup drive, the back up starts ... runs to about 80% of progress bar ... then fails with message Backup failed to complete.The error code is ox81000015.This says that Windows could not zip a file ... and remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails.
View 9 Replies View RelatedWindows 7/64 SP1
I have an external drive H: attached (2.2 TB NTFS partition). The drive is practically empty.
Today I wanted to do a full backup of the system. After a while it says that the last backup did not finish successfully (translated from German).
[code]....