I recently received a virus that did a plethora of things and one of them was trying to delete system 32. To counter this I tried to reset my comp to a previous date. After pushing it to the farthest date and still dealing it I decided to reset to factory default without backing up any files. Everything goes great but when it starts installing the service and the OS it says the installation can not continue and the comp must be restarted. My comp is a HP TouchSmart 600 PC running Windows 7 Premium 64-bit. I have disconnected everything from it and tried running it on safe mode but I do not know how to restart it without pressing the power button but that just ends everything.
I got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional
I have windows 7 ultimate x64 and I have been trying to install microsoft .NET Framework 4. However, every time I try, it always fails. It gets about halfway through the installation and a window pops up asking for me to open the location of an .msi that is not there. It's not in the setup fies and its not in the location that is given.Here is a screen cap of the installation and the window that pops up asking for the .msi file.
I have just had a new 1Tb hdd fitted by a shop after my original failed but since he fitted it it keeps crashing ior corrupting Is it possible to reload the Win 7 Home premium to a clean start as I can'tr get it to load
I am not able to install Maya 2010 on my PC running on Windows 7 32Bit. Tried the Isscript installation, DirectX updated,An annoying window saying the installation was interrupted and no changes were made.
When I plug it in, driver installation starts but fails. I can locate the device in the Device Manager, should I be manually installing a driver in this case? If so, I'd like to have a driver.
Can't install Windows 7 from original DVD , I formatted the HDD twice and still, same error. The installation stops after 10-15 min with this error code 0x80070017 I know the media is in great condition, so exclude this problem. Maybe HDD failure ? I did the format and wipe via usb with MiniTool partition wizard .
My new asus p8z68-pro mobo runs everything just fine in the bios -- it detects all the relevant drives, my USB peripherals are working, etc. When I try to install Windows, however, I run into a problem. As soon as the installation files load off of the DVD and the installation begins my USB devices shut down. This means, of course, no keyboard or mouse to proceed with the install, so I'm stuck.I checked in the bios -- both the usb legacy support and the usb 3.0 legacy support are turned on. I have tried this with the EHCI hand-off both on and off. Either way, I run into the same problem. I've even swapped out my fancier mouse and keyboard for simpler models to see if it was some sort of driver issue, but nothing seems to make a difference.
I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
Specs: Toshiba laptop Win7 home premium 64-bit 3gb RAM freshly formatted hard drive original media from Toshiba with win7
I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.
After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.
Yesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.
I used to play the game without any problems on xp sp3 after i have installed windows 7 home basic,I experience lag while playing the game when i first start it runs smoothly but when the first half is about to end it starts lagging the lag increase as long as i play until it becomes very annoying.
I have Visio 2010 64bit and just recieved office 2013 from work 32 bit. It will not allow me to install office while still having visio 64 bit installed. I got the visio from a collage website while in school and no longer have the key, it looks like when I try to open it, it is trying to install office all over again since I uninstalled office 2010.
I recently upgraded from Acronis 2011 to 2013. Please note that Acronis 2011 boot cd works fine: tested booting with this cd and was able to boot to Acronis 2011. Upgraded recently to Acronis 2013 & made boot cd. Booted with 2013 CD. Acronis logo appeared on acreen & under logo appeared "Loading, please wait". I waited 10 minutes & nothing happened. Problem is reproducable. Also downloaded ISO file from Acronis & made Acronis 2013 boot cd. Booted with Acronis ISO cd & have same problem. Not sure what Acronis did in 2013 version as the 2011 cd boots.
I just installed Office 2013 and decided to give the updated Outlook a fair try. I'm coming from using Thunderbird as my main e-mail program.
I have 10 gmail IMAP accounts setup in Outlook, using to be what I believe are the default settings (I haven't changed anything in any of the accounts). I am not working offline, and I have Outlook set to send/receive every 10 minutes.
In Thunderbird, anytime a new e-mail message is received, it is automatically downloaded and I get an alert sound.
However with Outlook, in order for the e-mail to be downloaded, I have to click on the Inbox of the respective e-mail account in order for it to be automatically downloaded.
This isn't an e-mail account problem because I immediately receive new e-mails via IMAP in Thunderbird and on my phone.
I was wanting to know if anyone been having problems with Outlook 2013. The problem I'm having is that it will stop synchronizing. I have my gmail setup to it and it will send but when it tries to receive it doesn't complete. I've let it run hours at a time to see if it ever complete but it never dose. I also deleted my account and reentered it and still dose the same thing.
My company recently made Office 2013 Pro Plus available to its employees through the Home Use Program --so I went on line and purchased a license. When I did this for Office 2010 and got the email from MS, their link was to a download of an ISO file from which I was then able to burn a DVD.
But this time, the download is an executable and the name (Setup.x86.en-US_ProPlusRetail_[product key]_act_1.exe) implies that it is an installer. I really don't want to install it right now; instead, I want to download it and burn a DVD -- and install it later. What the installer program actually does?
not sure if this has been posted already but WLM is being replaced with SKYPE as from Mar 2013.I know a lot of Ms Office users use Windows Live Messenger (although LYNC seems good if you can connect to a server) BBC News - Microsoft ditches Windows Live Messenger for Skype
One of my friends is giving me a disk to install mc afee totoal prtection 2013 because he says u can install it up on three computers. he says its good because its paid and better than free ones.is it good. if not, what free virus protections are good
Every time I start up Autodesk 3ds Max 2013, I get a BSOD shortly after it begins initializing with the error of PAGE_FAULT_IN_NONPAGED_AREA. Everything else runs fine, and Autodesk products are the only things that cause any form of error. What do I do to make this no longer happen?
So the question is in the title. Outlook 2013 gives me notifications about newly received junk mail which I don't want to see. Can I somehow disable that feature and let it notify me just when regular email is received?
Quote: Acronis International has released a beta version of True Image Lite 2013, a stripped-down version of its True Image backup tool.The new release ditches disk, partition, email and file backup types, for instance (there�s non-stop backup and online backup only). There are no full or differential backups (just incremental). No scheduling, no backups to CDs, DVDs or Blu-ray, no option to create a bootable recovery disc, and of course none of the extensive settings you�ll find in the full True Image package.
