Every time I start up Autodesk 3ds Max 2013, I get a BSOD shortly after it begins initializing with the error of PAGE_FAULT_IN_NONPAGED_AREA. Everything else runs fine, and Autodesk products are the only things that cause any form of error. What do I do to make this no longer happen?
View 7 Replies
Currently I am experiencing a major issue with my computer. I will start my computer up and I get a BSOD within about 10 minutes. It has happened 10 times already and I have no idea how to fix it. I have read numerous forums, tried updating graphics card drivers, hard drive drivers. I have performed disk check and run a memory test with no errors. I am not sure if it is a hardware fault or other. The BSOD also occurred while I was in safe mode with netowrking turned on. I have tried doing clean boots and even tried disabling my graphics cards, network adapters and audio drivers. I will post the dump file which is always the same every time the BSOD happens.
Dump File : 042212-9937-01.dmp
Crash Time : 22/04/2012 4:13:52 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
[Code].....
with BSOD. Its happening random.[CODE]
View 1 Replies View Related
After recently installing a new RAM DIMM to my PC, once in a while Windows 7 Ultimate 32-bit crashes.
I'm not certain, but I think the only error I've received on BSoD is "PAGE_FAULT_IN_NONPAGED_AREA" (last time the parameters were 0x00000050 (0x80eac2dd, 0x00000000, 0x9e306c99, 0x00000002)). I'll attach the mini-dump files. I'm pretty sure is related to my RAM, because it's mixed. I sure hope my new DIMM isn't faulty. I'm also attaching a report from Everest about my PC.
P.S.: I've also recently played a bit with my BIOS to OC my CPU a bit. CPU voltage is at 1.45V, memory is set to 1.85V, DDR-2 667, 5-5-5-18-2T.
P.P.S.: Forgot to mention... I've run memtest86+ overnight (about 8 hours) - no errors... Also ran Windows' memory test - no errors.
I've come across this BSOD a few times when gaming recently and decided to try to solve what is causing it. Here is the minidump file of the crash:
View 4 Replies View RelatedBeen having random BSOD for the past week or so. Started on Sunday (11-27-11),where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday morning to see if my memory was bad. After 2 full passes (I know, not a full 8), it didn't seem to be that, so I went ahead and did a System Restore from a backup from roughly 2 weeks prior. This led to solid performance for the next week, until this morning (Monday, 12-5-11) when I had another. All BSOD events seemed to occur at random times, so I can't say they were triggered by a specific event to the best of my knowledge.
I had performed the BSOD dump collection and Performance Monitor Report on last monday as well as doing the BSOD dump collection today. Regretfully, I cannot get the Performance Monitor to stop running today, so hopefully just the dump collection will be enough.As for my computer components:- HP Elite 7000 MT machine- Windows 7 Ultimate x64- Not the version originally installed on system- Hardware is a little over a year and a half old- 64-bit OS (originally had x86) wasinstalled 13 months ago.- Only non-stock hardware would be an added harddrive (just a backup drive, no OS on it), and I added 4GB more RAM (alongside the original 4GB) back in January.
New to these forums.
[code]...
I'm brand new to the message board and have been experiencing BSOD messages for about a week. In the BSOD it said something about; "PAGE_IN_NONPAGED_AREA" Also here were some error codes it gave off too in the BSOD.
Technical Information:
STOP: 0x00000050 (0xFFFFF87FFFCCBA53, 0x0000000000000008, 0xFFF87FFFCCBA53, 0x0000000000000005)
Here are some of my hardware specs:Windows 7 Ultimate 64bit w/Service Pack 1 Intel Core2 Quad Q6600 @ 2.40Ghz Asus P5N-D (socket 775) motherboard 8GB DDR2 @ 399Mhz Nvidia GeForce 8800GT 768MB
My pc is working perfectly, but freeze with BSOD every moment (can be 10 min, 30 min, an hour, or couple hours), sometimes, leave me alone, but always come back
View 6 Replies View RelatedI usually get BSOD once a game but not every game, more of it during the start of a DOTA 2 game. The most recent one I had showed an error: PAGE_FAULT_IN_NON_PAGED_AREA stop: 0x00000050 etc.. This requires me to reboot my computer 4-5 times daily..
View 1 Replies View RelatedHave recently completed a clean install of Windows 7 Home Premium x64 on a customers laptop, installed Microsoft Office Home and Student 2007 x32 and put all his data back on there.Since then hes been getting BSOD's. Have downloaded and installed Blue Screen viewer and have found that im getting 2 different error codes.
1, Stop Error 000000050 PAGE_FAULT_IN_NONPAGED_AREA
2, Stop Error 000000109
I have tested the RAM using memtest overnight and has 15 passes. The problem is i cant reproduce this issue, it seems to be completely random in falling over. I have had it on a test bench for 48 hours running PCMARK 7 and it hasnt fallen over once and then when i have given it back to the customer he says within the hour it was doing it again. I have asked him if there is something specific he is doing when it crashes and he says no its just general use.
My friend has a virus on his laptop, which deleted his winnet.dll files. After trying everything he could he decided to do a restore. When he tried to restore he said it was taking way to long and decided to just to turn off the laptop. Leading to more problems, now every time he tries to boot the laptop it shows the loading files followed by the Windows loading screen. After that it shows a blank screen with the mouse. Anyway to fix this.I tried booting from safe mode but that didn't work, it would just crash with a BSOD
View 5 Replies View RelatedGetting random BSOD's during every now and then. Especially when playing games (ANNO 2070, for ex.). I've run CHKDSK(inc. physical disk scan), and Memory Tests and found no errors. I am using NOD32 AV even though the PERFMON report states otherwise.
View 9 Replies View RelatedFS9 (Flight Simulation 2004) used to run OK, no problems. After installing REX2004 patches and Overdrive, a few seconds after starting FS9 a BSOD occurs. So far no other programs have caused a BSOD. I have tried fully uninstalling FS9 and reinstalling it and the BSOD returns after the reinstall. At present FS9 is not installed. Have now created the file folder you requested to support this thread, see attached. I can again run FS9?
View 5 Replies View Relatedanything from the dump files? Problem appeared out of the blue, system had been working fine.
View 1 Replies View RelatedI just built my first computer and am now attempting to do an install of Windows 7 Professional (64 bit). I am encountering BSOD during the install.
I downloaded the ISO and burned it to disc and had BSOD issues. At first I thought possibly that it was the ISO or the burn, but now I am using a disk that has been used successfully on other computers.
My specs are as follows
Gigabyte P55-UD4P (F3 bios)
Intel i5 750
4 GB of Crucial DDR3 RAM (2x2GB)
WD Caviar Black 640 GB Hard drive
Sapphire Radeon 5850HD
I have adjusted the BIOS to boot to the DVD drive first. In addition, the BIOS came not set to AHIC (I think that is what it is called. I heard that it can cause problems.) I have made no changes in the BIOS.
I have encountered BSOD at different times. First I got it during the Windows 7 installation, at 1%. Now I've gotten it before you are even able to select the language to install it in (the first screen you are presented with I believe).
I have gotten different errors, but unfortunatly I only wrote one of them down, the most recent. It says "PAGE_FAULT_IN_NONPAGED_AREA" and the tech info says: "STOP: 0x00000050"
I really don't know exactly where to start to troubleshoot this. I really don't know if it's a hardware or software issue.
A couple of months ago, I bought a new graphics card: a Nvidia 560GTX (Gigabyte GV-NV56GOC) and a new PSU (Corsair CX500 V2 Builder Series, 500 W) to run it and after 3 weeks the PC began to fail with the 116 error.At the begining it crashed only at Windows 7 blue starting screen (after the loading screen with win logo and a progress bar). It happened once every 4 or 5 days.After a month it was almost imposible to run unless starting in "FailSafe Mode" and began to crash in the desktop in idle. I tested it with another drivers, clean installs, changing cabes, etc... and nothing worked, only with another graphics card (an old nvidia 220GT wich came with the PC) and worked properly so I decided so send the card in RMA.
A couple of days ago the seller sent me an email saying that they couldn't find any issue with the 560GTX and they sent the card to Gigabyte to further testing (I wil have to wait 20-30 days to have more info). Yesterday my PC with the old card (the 220GT) began to fail while playing Skyrim with a grey screen and a strange buzz in the speakers. After 2 seconds it restarts saying that there was an system error bccode 116. Today it has crashed 4 times in 5 hours while playing (same as yesterday), "youtubbing" or (I think, but not sure than) in idle with a white screen and a strange buzz in the speakers, but not starting like with the 560GTX.
I had to change my HDD a month ago too so I tested in 2 diferent HDDs, drivers are OK and I guess that the PSU is enough for the new card and more than enough with the old one. I also ran sfc.exe /scannow witho no problems.I'm running Windows Home Premium x64 (Service Pack 1) OEM, reinstalled one or 2 months ago. I will attach minidump files with errors of both cards.
System Spec:
Intel Core i5-3570k
Asus P8Z77-Pro M/b
16GB DDR3 1600MHz RAM (2x8)
2x2TB 7200RPM, 64MB cache HDD's
1x500GB 7200RPM HDD
nVidia GeForce 8800GTS
Creative SoundBlaster Xtreme Gamer sound card
Linksys WMP600N wireless PCI card
Corsair HX650 PSU
1x Blu-Ray optical drive
1x DVD optical drive
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
0x0000001a - MEMORY_MANAGEMENT
0x00000050 - PAGE_FAULT_IN_NON_PAGED_AREA
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.
I have trawled the forums and tried what seem to be the usual tricks.
Including: Running anti virus (AVG)
Running a registry cleaner
Running a Malware cleaner
Replacing old RAM with newer and more RAM.
Removing Daemon tools
Some of these measure have provided (the illusion of?) stability, but never for more than a day. SO, I'm a bit stumped and hope someone can advise. Perhaps interestingly I am having some problems updating my ATI driver, it is 12.3 instead of 12.4 at the moment. I have included specs below, unfortunately I don't seem to be able to attach Minidumps.
Intel® Coreâ„¢ i5 750 Quad Core Processor (2.66GHz, 8MB Cache) - LGA1156
Windows 7â„¢ Home Premium with Service Pack 1, 64-bit - English
Midi-Tower ATX Chassis + 550W PSU + CardReader- Silver
[Code].....
I have been trying to fix this computer and i cannot get this BSOD to go away. I have installed new RAM and re-installed windows to no avail. I have updated the drivers for the video card and the cpu.
View 3 Replies View RelatedWhen my computer start everything works perfect and runs fine,but when i start Leageu Of Legends i will get after 20 minutes sometimes more sometimes less the BSOD.Yesterday i didnt had anny bsod when playing Leageu of legends.today i did get the problem again.week ago same story.I think i got a problem with my RAM or something else.I get the error MEMORY_MANAGEMENT (0x0000001a) or 0x00000050.
Computer specs:
500gb harddisk,
windows 7 ultimate 64bit,
nvidia gtx550ti 3gb,
8gb ddr3 ram,
MSI 760GM-P23(FX)
crash dumps error while playing Football Manager 2013?
View 1 Replies View RelatedI have Dell Inspiron Mini 1012 netbook with secondary monitor. I want to install Autodesk Inventor Professional 2012. Some of my friends having Inventor installed, complaining that the system became slow after installation. What i have to do to avoid this problem? I have 1 GB RAM.
View 4 Replies View RelatedI have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies View RelatedBefore saying you dont have the requirements to post a Bsod theard its because i just want a single question cuz the cause is alrady known I got this bsod of Bugcode_usb-driver 0x000000fe when i was atempting to start my comuter and i was having a single usb driver besides my keyboard and mouse it was my portable vodafone internet usb and thats the single cause i can see and i want to ask you the pro-s if i should do something about it?
View 4 Replies View RelatedThe problem started yesterday while I tried to run Counter-Strike Global Offensive by launching it with the ESEA client and got a BSOD.At first I thought it was a CS:GO related problem as the game is relatively new and there were GPU problems in the past when the game was beta (I have a NVIDIA GTX560M on a Qosmio x775).
Following forums I figured I may have to flash BIOS and update graphics card drivers. However, despite these updates I kept BSOD'ing every time while trying to launch the game.Taking my research further I realized the computer would crash while starting ANY game. Even opening the NVIDIA client to change 3d settings led to a BSOD. After a lot of frustration and futile updates, I thought perhaps it was an overheating issue and left the laptop off for the night with all USB ports unplugged.I really need to know what is going on as I haven't the faintest clue. I've attached a diagnostic error report of one of the crashes (there have been many) and I am willing to provide any extra information just as long as I get some responses!
Recently I have been experiencing some BSOD problems. The BSODs only occur when I am opening video programs, e.g. games and movie editing software. I am still able to run processor intensive programs such as AutoCAD. Some software still works when I am using the integrated graphics. Would it be power supply? Drivers? I would be able to supply .dmp files if needed.
View 8 Replies View RelatedI have a Macbook Pro and I'm running Windows 7 through Bootcamp. Everytime I try to start my computer a BSOD appears after the window logo with "STOP: C0000135 The program can�t start because %hs is missing. Try reinstalling the program to fix this problem." I have tried booting through safe mode and all the modes listed when pressing F8 when starting the computer. None of the boot properly. All I get is a BSOD and computer shuts off and restarts.
View 4 Replies View RelatedI have been struggling with this for some time so I will try to describe everything I've done to date. I have: Windows 7 Professional 64 Bit The hardware is under 2 years old. I have recently re-installed the OS but the trouble predates that. Since last June, I have been receiving BSOD's after the Post but during Starting Windows screen.They all seem to revolve around "ntoskrnl.exe" and my WhoCrashed program has consistently indicated its a driver issue. So I started peeling back the layers.I took out the SLI'd second video card. Still happened, I uninstalled Norton, still happened. I ran the RAM diagnostic tool, everything came back clean. It hit a spike recently and I RMA'd my motherboard. That was a week ago. I installed Windows on a brand new hard drive to mitigate variables. It worked great for 2 days then today, BAM, my first BSOD since the rebuild. This BSOD is consistent with the ones I was receiving before the rebuild. It seems to be random, I can go a week with no BSOD, and then BSOD repeatedly for the next several days. I'm slowly being driven insane little by little. I have used the UniBlue driver scanner and it tells me everything is up to date except for the Marvell Driver which is a raid controller and a controller that I have nothing plugged into. I did not install that this most recent build. Could it be a RAM problem? A BIOS issue? I am not a pro at the BIOS configuration but it doesn't "feel" like that's the problem since it consistently boots, etc.Anyway, I put myself at the forum's mercy.
View 1 Replies View RelatedI get the BSOD mainly when starting games, such as Eve Online or Call of Duty 3, using Steam, but I have also got it while reading email in Outlook in between typing in MS Word and using Firefox.
View 8 Replies View Relatedim trying install windows 7 (7100 x86) on my computer.
but... he load files and after Starting Windows in first time get a BSOD.
0x00000124 (0x00000004, 0x813508D4, 0x00000000, 0x0000000)
i try:
- remove all usb (mouse and webcam)
- Change DVI to VGA
- burn DVD 4x and 8x
- download others versions (7077, 7057 and 7106)
but always give BSOD. now i cant use Windows 7 somebody know anythink ?
