I have been struggling with this for some time so I will try to describe everything I've done to date. I have: Windows 7 Professional 64 Bit The hardware is under 2 years old. I have recently re-installed the OS but the trouble predates that. Since last June, I have been receiving BSOD's after the Post but during Starting Windows screen.They all seem to revolve around "ntoskrnl.exe" and my WhoCrashed program has consistently indicated its a driver issue. So I started peeling back the layers.I took out the SLI'd second video card. Still happened, I uninstalled Norton, still happened. I ran the RAM diagnostic tool, everything came back clean. It hit a spike recently and I RMA'd my motherboard. That was a week ago. I installed Windows on a brand new hard drive to mitigate variables. It worked great for 2 days then today, BAM, my first BSOD since the rebuild. This BSOD is consistent with the ones I was receiving before the rebuild. It seems to be random, I can go a week with no BSOD, and then BSOD repeatedly for the next several days. I'm slowly being driven insane little by little. I have used the UniBlue driver scanner and it tells me everything is up to date except for the Marvell Driver which is a raid controller and a controller that I have nothing plugged into. I did not install that this most recent build. Could it be a RAM problem? A BIOS issue? I am not a pro at the BIOS configuration but it doesn't "feel" like that's the problem since it consistently boots, etc.Anyway, I put myself at the forum's mercy.
I've been experiencing a number of BSOD's in the past 2 days. Up until then my computer has been working nice and dandy. You'll find attached my log, etc all zipped up.
My hardware specs: Retail windows 7 Professional x64 i5-760 Asus P7P55D deluxe mobo 8GB G.Skill ECO DDR3 Gigabyte 1GB HD 6850 60GB OCZ Vertex SSD 320GB WD 2 x 1.5TB WD
All the parts are 2 years old and under except for the 320GB hd
My friend has a virus on his laptop, which deleted his winnet.dll files. After trying everything he could he decided to do a restore. When he tried to restore he said it was taking way to long and decided to just to turn off the laptop. Leading to more problems, now every time he tries to boot the laptop it shows the loading files followed by the Windows loading screen. After that it shows a blank screen with the mouse. Anyway to fix this.I tried booting from safe mode but that didn't work, it would just crash with a BSOD
Currently I am experiencing a major issue with my computer. I will start my computer up and I get a BSOD within about 10 minutes. It has happened 10 times already and I have no idea how to fix it. I have read numerous forums, tried updating graphics card drivers, hard drive drivers. I have performed disk check and run a memory test with no errors. I am not sure if it is a hardware fault or other. The BSOD also occurred while I was in safe mode with netowrking turned on. I have tried doing clean boots and even tried disabling my graphics cards, network adapters and audio drivers. I will post the dump file which is always the same every time the BSOD happens.
After 3 days of frustration to get the Tux for TF2, I very stupidly uninstalled Ubuntu incorrectly, the result was no longer being able to boot Windows 7. I receive a BSOD after the Starting Windows screen. After some googling, it appeared my Master Boot Record was corrupt. I followed all the step which involved using my Windows 7 'legit' installation disk and using the command prompt to restore the MBR, but my Windows 7 still refuses to boot. I honestly do not want to format my current HDD and install Windows 7 again and download all my games and such back. That seems to be my only option next to buying a new HDD.
I have Windows Vista Ultimate and Windows 7 Ultimate installed as dual-boot on my PC at the momment. Is there any way to install Windows XP Home without starting over again?
Before saying you dont have the requirements to post a Bsod theard its because i just want a single question cuz the cause is alrady known I got this bsod of Bugcode_usb-driver 0x000000fe when i was atempting to start my comuter and i was having a single usb driver besides my keyboard and mouse it was my portable vodafone internet usb and thats the single cause i can see and i want to ask you the pro-s if i should do something about it?
The problem started yesterday while I tried to run Counter-Strike Global Offensive by launching it with the ESEA client and got a BSOD.At first I thought it was a CS:GO related problem as the game is relatively new and there were GPU problems in the past when the game was beta (I have a NVIDIA GTX560M on a Qosmio x775). Following forums I figured I may have to flash BIOS and update graphics card drivers. However, despite these updates I kept BSOD'ing every time while trying to launch the game.Taking my research further I realized the computer would crash while starting ANY game. Even opening the NVIDIA client to change 3d settings led to a BSOD. After a lot of frustration and futile updates, I thought perhaps it was an overheating issue and left the laptop off for the night with all USB ports unplugged.I really need to know what is going on as I haven't the faintest clue. I've attached a diagnostic error report of one of the crashes (there have been many) and I am willing to provide any extra information just as long as I get some responses!
Recently I have been experiencing some BSOD problems. The BSODs only occur when I am opening video programs, e.g. games and movie editing software. I am still able to run processor intensive programs such as AutoCAD. Some software still works when I am using the integrated graphics. Would it be power supply? Drivers? I would be able to supply .dmp files if needed.
I recently purchased a Dell XPS 15 (l521x) that came with Windows 8. The system boots from the hard drive through UEFI by default, so I think the hard drive is already GPT. I am attempting to install Windows 7 from a UEFI bootable USB. The system goes through the 'copying files' phase and then goes to the Starting Windows screen. As the colored dots of the Windows logo are circling, the system freezes. Can someone help me fix this problem? The following are the steps I took in order to install Windows 7:
- Formatted a brand new 4GB USB drive to FAT32 - Downloaded Windows 7 ISO (I have a key) - Extracted ISO files to USB - Made adjustments so that USB is UEFI bootable (efi/boot/bootx64.efi) - In BIOS, set SATA Operation to AHCI and disabled Secure Boot - Select USB drive from UEFI boot menu
When I run the Windows 7 Home Premium OEM disc I get past "loading files" and then freeze on "starting windows". I see 4 little colored balls in the center of the screen (guessing the start of the MSFT logo) and then everything freezes.
I have a Macbook Pro and I'm running Windows 7 through Bootcamp. Everytime I try to start my computer a BSOD appears after the window logo with "STOP: C0000135 The program can�t start because %hs is missing. Try reinstalling the program to fix this problem." I have tried booting through safe mode and all the modes listed when pressing F8 when starting the computer. None of the boot properly. All I get is a BSOD and computer shuts off and restarts.
I get the BSOD mainly when starting games, such as Eve Online or Call of Duty 3, using Steam, but I have also got it while reading email in Outlook in between typing in MS Word and using Firefox.
I contacted HP support which charged me $65 to tell me to purchase a $140 Hard Drive and $20 recovery disks. I have installed the hard drive and used the recovery disks now i get stuck at Starting Windows screen. I have let it sit for 1.5 hours just to see if it would eventually start and nothing.
The issue started with mouse touchpad stopped working and the light on the side of the laptop turned from white to a pinkish color. It is a HP Pavilion DV6 that this happened to with windows 7 64 bit.
I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
After recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black âstarting windowsâ screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB MBoard: Asus P5K-E GPU: Sapphire HD 2600XT HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS) RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb) PSU: Antec NeoPower HE550w (ATX 12v) OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
I recently built a computer, and tried to install Windows 7 OEM on it, but it gets stuck at the screen where it says starting windows and the logo appears. The logo gets smaller and larger. I've been told it might be something with the RAM, but tested it out and that's not the problem.
Every time I start up Autodesk 3ds Max 2013, I get a BSOD shortly after it begins initializing with the error of PAGE_FAULT_IN_NONPAGED_AREA. Everything else runs fine, and Autodesk products are the only things that cause any form of error. What do I do to make this no longer happen?
FS9 (Flight Simulation 2004) used to run OK, no problems. After installing REX2004 patches and Overdrive, a few seconds after starting FS9 a BSOD occurs. So far no other programs have caused a BSOD. I have tried fully uninstalling FS9 and reinstalling it and the BSOD returns after the reinstall. At present FS9 is not installed. Have now created the file folder you requested to support this thread, see attached. I can again run FS9?
A couple of months ago, I bought a new graphics card: a Nvidia 560GTX (Gigabyte GV-NV56GOC) and a new PSU (Corsair CX500 V2 Builder Series, 500 W) to run it and after 3 weeks the PC began to fail with the 116 error.At the begining it crashed only at Windows 7 blue starting screen (after the loading screen with win logo and a progress bar). It happened once every 4 or 5 days.After a month it was almost imposible to run unless starting in "FailSafe Mode" and began to crash in the desktop in idle. I tested it with another drivers, clean installs, changing cabes, etc... and nothing worked, only with another graphics card (an old nvidia 220GT wich came with the PC) and worked properly so I decided so send the card in RMA.
A couple of days ago the seller sent me an email saying that they couldn't find any issue with the 560GTX and they sent the card to Gigabyte to further testing (I wil have to wait 20-30 days to have more info). Yesterday my PC with the old card (the 220GT) began to fail while playing Skyrim with a grey screen and a strange buzz in the speakers. After 2 seconds it restarts saying that there was an system error bccode 116. Today it has crashed 4 times in 5 hours while playing (same as yesterday), "youtubbing" or (I think, but not sure than) in idle with a white screen and a strange buzz in the speakers, but not starting like with the 560GTX.
I had to change my HDD a month ago too so I tested in 2 diferent HDDs, drivers are OK and I guess that the PSU is enough for the new card and more than enough with the old one. I also ran sfc.exe /scannow witho no problems.I'm running Windows Home Premium x64 (Service Pack 1) OEM, reinstalled one or 2 months ago. I will attach minidump files with errors of both cards.
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
I recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.
OK, trying to put windows 7 on a motion m1300 tablet. 1gig ram 1ghz cpu and 60gb hard drive. due to the bios being limiting install from xp desktop is impossible, so using an external disk drive i am trying to do a clean install, but it just stops at setup is starting, i know that seven will run on these, seen it with my own eyes, but i cannot get setup past this part.i have a feeling its the graphics driver, but getting into device manager from the language screen/ click here to install screen hasnt worked. its not in the system32 folder and so i dont know where to lookedit: before its asked, yes the disk is good, and i cant use a usb because the bios wont alow it. also the bios are up to date
I just got Windows 7 Pro plus a new machine and I am trying to install Windows 7 but it keeps hanging at Starting Windows when I go to install. Sometimes I see artifacts when it freezes and sometimes I just freezes. Any idea what is going on?
Okay so I may have buggered something up royally, but I took the CPU out of my mom's computer. Ended up dusting it out, because it was overheating. I wanted to try the phenom out in my board so I swapped them out. It is an HP pavilion a6755y se. I put an Athlon x2 in it and it wouldn't post. I took it out and put the phenom back in and now it won't boot to windows. I reformatted the entire drive and to no avail it still didn't work. I disconnected all USB's attached and I am using a PS/2 mouse and keyboard. This is really frustrating to me. It loaded the default bios settings from when I took the CMOS battery out. Had to change the Sata controller to IDE. When put on ACHI it gave me a screen full of colorful boxes that flashed and really scared me. I am very frustrated and I am wondering where I should go from here. My mom is pissed and she wants her computer back to normal conditionDunno how to flash the bios. It reads all the ram and the phenom that is in its socket so I don't think it's a hardware issue. Although, I can't get a livecd to run for the life of me. I dunno what I have done, but I would like to fix it asap even if it needs new parts. It did take quite a bit of force to get the heatsink off the cpu when I was dusting
So I just did a new custom built comp and got Windows 7 Professional for it. I burnt it to a DVD from the ISO I got from the Microsoft Store. It would freeze at the Starting Windows screen just after the 4 dots converged into the logo.
Things I've tried:
-One stick of RAM -Installed on same HDD on another computer rig (Booted fine until I brought it back to my new rig. Then it wouldn't boot on neither) -Memtest -USB Boot installer
I also have all the unneeded peripherals out.
Rig: Z68XP-UD3 (Using onboard VGA until 7 is working then its a Asus GTX 560 Ti) 1 4 GB Corsair Vengence 1600 MHZ. (Took the second out) I5 2500K 3.3 GHz(Stock) 600W OCZ MODX Stream Pro 1 TB Western Digital Black HDD
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
I purchased my laptop in January and I'm not really sure what happened, I must have been struck by a pretty bad virus or something because I had a lot of protection and ran regular scans. But anyway, one day I booted up my computer and it said error recovery or something a prompted me to repair my pc but I choose start windows normally, and it loaded normally but just before it could get to the login screen a blue screen error flashed for a split second then my laptop restarted and took me to the error screen again. when I try repair my computer, it takes me tow blank lie screen,ole the login screen, with a cursor in the middle, but no dialog box. I left this running for up to 3 days, so it's definitely not just loading. so I decided my computer is pretty much screwed, and searched for my installation disc it came with. (windows was already preinstalled so I'd never used it before. on startup I pressed f12 and booted from cd rom, then it said press any key and took me to a loading screen, which took about 5 minutes and then to the installation screen. I said my language is English, choose uk English etc. then it says install now or repair your computer. when I click the repair option, I am taken to the same blank blue screen from before. when I press install it says setup is starting... and the loading cursor is spinning, so I know it's not frozen. I left it for half an hour, tried again, and this time left it for 11 hours, but still no setup has started. there can't be anything wrong with my disc, I'd never taken it out of the packet before, and I was very careful not to scratch it. it's a dell operating system windows 7 disc for if you need to reinstall windows on your preinstalled pc.