BSOD Error 0x000000F4, When Starting Up Windows 7?
Mar 4, 2012
My friend has a virus on his laptop, which deleted his winnet.dll files. After trying everything he could he decided to do a restore. When he tried to restore he said it was taking way to long and decided to just to turn off the laptop. Leading to more problems, now every time he tries to boot the laptop it shows the loading files followed by the Windows loading screen. After that it shows a blank screen with the mouse. Anyway to fix this.I tried booting from safe mode but that didn't work, it would just crash with a BSOD
I have been getting random BSOD's while I am away from my computer, never while it is in use. They have been occurring about twice a month but I have had two in the past 24 hrs.
I was using old IDE drivers and I should switch to AHCI but I am not sure if that is the problem and I believe I would have to reinstall windows in order to make the switch.
Here are the two most recent reports from Event Viewer. Details are in the attachment.
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa801109a730, 0xfffffa801109aa10, 0xfffff8000358b510). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 072512-50497-01.
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa80110a5b30, 0xfffffa80110a5e10, 0xfffff800035ca510). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 072512-39702-01.
Computer is recently built running 2008 server R2. Everything seemed fine until a couple days ago when I started coming home to a BSOD. The code is always F4 (Critical Object Termination) on ntoskrnl.exe save for once when it crashed on a bios update.
Since then I have updated my bios to the latest version, removed a troublesome NIC card (not yet replaced), and tried unsuccessfully to find a pattern to the problem.
sfc /scannow comes back clean. There is no overclocking. Hard drive load does not seem to be a factor. Hard drive scans have come back clean. Disabled Symantec Endpoint Protection with no effect. Malwarebytes reports clean. Not sure what else to do now. I've seen it run for 10 minutes and crash. I've also seen it run for 24+ hours before it crashes again.
Left the system running using Driver Verifier for a while (3+ hours) with no issues.
I have been getting random BSOD for about two days now. I reformatted my computer today thinking it would help but i did not fix the BSOD. Error code on the BSOD 0x000000f4 (0x0000000000000003, 0xfffffa80096bb3e0, 0xfffffa80096bb6c0, 0xfffff80002ddd510)
This has been going on for a while now. I replaced my motherboard and a bad hard drive. I run off an SSD (samsung 830) as my boot drive with a 1 TB hard drive for storage. I ran memtest multiple times with no errors. Could this be a failing PSU?The debug info in WhoCrashed said this was not a hardware issue but most likely a driver.I uninstalled all the audio drivers except the one I used just in case. I reverted all my overclocking for the CPU and ram back to default.
I got the error code: The computer has rebooted from a bugcheck. The bugcheck was:0x000000f4 (0x0000000000000003, 0xfffffa800e87d450, 0xfffffa800e87d730,0xfffff80002fd0510). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 091612-9531-01.[CODE]
i used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
Currently I am experiencing a major issue with my computer. I will start my computer up and I get a BSOD within about 10 minutes. It has happened 10 times already and I have no idea how to fix it. I have read numerous forums, tried updating graphics card drivers, hard drive drivers. I have performed disk check and run a memory test with no errors. I am not sure if it is a hardware fault or other. The BSOD also occurred while I was in safe mode with netowrking turned on. I have tried doing clean boots and even tried disabling my graphics cards, network adapters and audio drivers. I will post the dump file which is always the same every time the BSOD happens.
a friend let me borrow their computer while mine is being de-bugged. samsung 64bit w7 and i had paused a movie at hulu while i took a phone call. i come back like 5 mins later to see the bsod with stop 0x000000f4 (0x000000000000003, 0xfffffa800850db30, 0xfffffa800850de10, 0xfffff800031848b0)physical memory dump failed with status 0xc0000010i've started back up in safe mode, but what happened? is there anything i need to do? can i go back to regular mode
Every time I start up Autodesk 3ds Max 2013, I get a BSOD shortly after it begins initializing with the error of PAGE_FAULT_IN_NONPAGED_AREA. Everything else runs fine, and Autodesk products are the only things that cause any form of error. What do I do to make this no longer happen?
FS9 (Flight Simulation 2004) used to run OK, no problems. After installing REX2004 patches and Overdrive, a few seconds after starting FS9 a BSOD occurs. So far no other programs have caused a BSOD. I have tried fully uninstalling FS9 and reinstalling it and the BSOD returns after the reinstall. At present FS9 is not installed. Have now created the file folder you requested to support this thread, see attached. I can again run FS9?
i been getting bsod alot in the past week a few time i got a few with ROQE LESS OR EQUAL something like that but i think i solve that already. now i getting the 0x000000f4 it just appear yesterday when i was watching a movie online snice then no matter if i start it on normal or any safe mode it appear after like 5 second after the restart so i cant get the dump files. the only thing i overclock is the cpu fan thats it.
I got a BSOD while on the internet after about 10-15 minutes. I tried it on Google Chrome, Firefox and IE 9. It also occured when playing runescape on EpicBot. It hasnt occured while i played maplestory. x86 (32-bit) or x64 ? x86 - the original installed OS on the system? Windows 7 Starter - an OEM or full retail version? OEM - OEM = came pre-installed on system - Full Retail = you purchased it from retailer - What is the age of system (hardware)? 5 Months - What is the age of OS installation? 5 Months
I've been having random BSOD crashes for the past week. Also, multiple attempts to fix the BSOD problem by using System Restore has resulted in a BSOD crash.Every BSOD has displayed "STOP: 0x000000F4" To my knowledge, no new hardware has been installed on my computer in several months.
Here is my Windows 7 info:
Home Premium 64 bit Original OS OEM Age of system and OS installation : 2 years
I have attached my BSOD and PERFMON files for your perusal. Hopefully this will be a short and sweet fix. I really don't want to buy a new computer or have to reinstall Windows 7.
0x000000F4 Collecting data for crash dump Initializing disk for crash dump
I've lurked around on a lot of websites looking over all the information available before posting here. I replaced a Seagate 1TB HDD with a Caviar 1TB, and that is when the problems began. I am leaning towards the Caviar just being a dud of an HDD, but I want to talk this out with some people before I switch my HDD.I've followed all the standard "make sure your collection is turned on" steps in the Startup and Recovery settings. All drivers are up to date. No Malware on the PC. Temps and voltage appear fine. 15 Hours worth of passes on the RAM turned out ok. Chkdsk returned no errors.So, in essence, computer worked fine, switched HDD, and now computer doesn't work. The entire PC is brand new.
A couple of months ago, I bought a new graphics card: a Nvidia 560GTX (Gigabyte GV-NV56GOC) and a new PSU (Corsair CX500 V2 Builder Series, 500 W) to run it and after 3 weeks the PC began to fail with the 116 error.At the begining it crashed only at Windows 7 blue starting screen (after the loading screen with win logo and a progress bar). It happened once every 4 or 5 days.After a month it was almost imposible to run unless starting in "FailSafe Mode" and began to crash in the desktop in idle. I tested it with another drivers, clean installs, changing cabes, etc... and nothing worked, only with another graphics card (an old nvidia 220GT wich came with the PC) and worked properly so I decided so send the card in RMA.
A couple of days ago the seller sent me an email saying that they couldn't find any issue with the 560GTX and they sent the card to Gigabyte to further testing (I wil have to wait 20-30 days to have more info). Yesterday my PC with the old card (the 220GT) began to fail while playing Skyrim with a grey screen and a strange buzz in the speakers. After 2 seconds it restarts saying that there was an system error bccode 116. Today it has crashed 4 times in 5 hours while playing (same as yesterday), "youtubbing" or (I think, but not sure than) in idle with a white screen and a strange buzz in the speakers, but not starting like with the 560GTX.
I had to change my HDD a month ago too so I tested in 2 diferent HDDs, drivers are OK and I guess that the PSU is enough for the new card and more than enough with the old one. I also ran sfc.exe /scannow witho no problems.I'm running Windows Home Premium x64 (Service Pack 1) OEM, reinstalled one or 2 months ago. I will attach minidump files with errors of both cards.
I have been receiving bsod stop 0x000000f4, 8008401950,8008401c30 errors.
i5 2500 k win 7 pro 64 bit evga gtx570 64 gb crucial ssd 1 tb wd caviar black
sometimes it hangs where you can move the mouse cursor but can't click or close any programs. when i reboot it sometimes freezes at the check ide drive.is it my ssd that is going bad? memory?
After restart it sometimes does not find the primary hard drive. The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all. I did a checkdisk and it turned out clean.
It seems I've been having random BSOD Stop errors ever since I put my new PC together about a month ago. I'm not sure what's causing it, and it's happened when I've been doing different things, but it almost seems to happen more frequently when I'm listening to Pandora Radio on my web browser (chrome).Switched my BIOS from AHCI to IDE (read on google this fixed some issues). Did not fix the issue.Read the windows website and attempted to get a hotfix for SATA hard drives (something about them not waking up in 10 seconds). Hot fix claimed it could not install on my computer. Gave up on it.Some system information (copy-pasted from newegg, forgive me if it's a lot of uselessness):
My computer has recently had this problem where it cannot continue to run normally for more that 5 minutes or so before it slows down then BSODs. It seems to start up normally and everything works just fine for a short amount of time until applications stop responding. Sometimes the taskbar disappears and there's an error message with the title of "jusched.exe - Application Error" without the quotes. When I click ok to terminate the program I just see my wallpaper for a few seconds before it BSODs. Other times it just BSODs after applications stop responding.The part after STOP always seems to be 0x000000F4, but I'm not sure about the rest.I'd also like to know if I need to wait a certain amount of time before I can shut down my computer during the BSOD. It seems to say something like "initializing the disk for dumping" for quite some time.
I have been struggling with this for some time so I will try to describe everything I've done to date. I have: Windows 7 Professional 64 Bit The hardware is under 2 years old. I have recently re-installed the OS but the trouble predates that. Since last June, I have been receiving BSOD's after the Post but during Starting Windows screen.They all seem to revolve around "ntoskrnl.exe" and my WhoCrashed program has consistently indicated its a driver issue. So I started peeling back the layers.I took out the SLI'd second video card. Still happened, I uninstalled Norton, still happened. I ran the RAM diagnostic tool, everything came back clean. It hit a spike recently and I RMA'd my motherboard. That was a week ago. I installed Windows on a brand new hard drive to mitigate variables. It worked great for 2 days then today, BAM, my first BSOD since the rebuild. This BSOD is consistent with the ones I was receiving before the rebuild. It seems to be random, I can go a week with no BSOD, and then BSOD repeatedly for the next several days. I'm slowly being driven insane little by little. I have used the UniBlue driver scanner and it tells me everything is up to date except for the Marvell Driver which is a raid controller and a controller that I have nothing plugged into. I did not install that this most recent build. Could it be a RAM problem? A BIOS issue? I am not a pro at the BIOS configuration but it doesn't "feel" like that's the problem since it consistently boots, etc.Anyway, I put myself at the forum's mercy.
I've been experiencing a number of BSOD's in the past 2 days. Up until then my computer has been working nice and dandy. You'll find attached my log, etc all zipped up.
My hardware specs: Retail windows 7 Professional x64 i5-760 Asus P7P55D deluxe mobo 8GB G.Skill ECO DDR3 Gigabyte 1GB HD 6850 60GB OCZ Vertex SSD 320GB WD 2 x 1.5TB WD
All the parts are 2 years old and under except for the 320GB hd
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
After 3 days of frustration to get the Tux for TF2, I very stupidly uninstalled Ubuntu incorrectly, the result was no longer being able to boot Windows 7. I receive a BSOD after the Starting Windows screen. After some googling, it appeared my Master Boot Record was corrupt. I followed all the step which involved using my Windows 7 'legit' installation disk and using the command prompt to restore the MBR, but my Windows 7 still refuses to boot. I honestly do not want to format my current HDD and install Windows 7 again and download all my games and such back. That seems to be my only option next to buying a new HDD.
I have a Hp pavilion dv4-1225ee laptop. I was installing windows 7 in my laptop last night. I was sleepy so I switched off the laptop during the setup. In the morning when I switched on my laptop there is no display. So I attached an external monitor. When I put the windows 7 dvd, the hp logo comes and then there is a dash ( I dont get the press any key to boot) and then I get "Setup is starting services" error. When I press Ok. The same procedure is repeated.
When my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
When I attempt to open various programs (Genie Backup, Adobe X for example) I get this error message. I've had problems with the OS, and would really like to back up my files and do a clean install.
