Windows Starting Service Error
Sep 4, 2011
I have a Hp pavilion dv4-1225ee laptop. I was installing windows 7 in my laptop last night. I was sleepy so I switched off the laptop during the setup. In the morning when I switched on my laptop there is no display. So I attached an external monitor. When I put the windows 7 dvd, the hp logo comes and then there is a dash ( I dont get the press any key to boot) and then I get "Setup is starting services" error. When I press Ok. The same procedure is repeated.
View 9 Replies
ADVERTISEMENT
May 8, 2012
When I stop any windows service using net stop <service name > from command prompt and reboot my machine, then a particular service that is set as automatic by default shouldn't start. Any way to achieve this using batch script or by any other means?
View 1 Replies
View Related
Feb 20, 2011
Every time I start my computer and log in, an error message pops up when I get to my desktop:Failed to connect to a windows service.Windows could not connect to the System Event Notification Service service. This problem prevents limited users from logging on to the system. As an administrative user, you can review the System Event Log for details about why the service didn't respond.
View 3 Replies
View Related
Jun 8, 2012
What is causing the error. I need to get my computer on. Is there anything I can do to get my system back on?
View 3 Replies
View Related
Feb 12, 2012
i try ed resetting my laptop to factory setting and got stuck on the set up and it keeps restarting it when i get into the start up page is there anyway to reset from the boot menu
View 1 Replies
View Related
Mar 12, 2011
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies
View Related
Dec 21, 2011
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
View 14 Replies
View Related
Jun 5, 2012
i am trying to send a fax with windows 7 fax service its failing saying an unexpected error occured. where do I have to configure so that this problem is rectified?
View 2 Replies
View Related
Mar 4, 2012
My friend has a virus on his laptop, which deleted his winnet.dll files. After trying everything he could he decided to do a restore. When he tried to restore he said it was taking way to long and decided to just to turn off the laptop. Leading to more problems, now every time he tries to boot the laptop it shows the loading files followed by the Windows loading screen. After that it shows a blank screen with the mouse. Anyway to fix this.I tried booting from safe mode but that didn't work, it would just crash with a BSOD
View 5 Replies
View Related
Jul 9, 2012
When my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
View 1 Replies
View Related
Aug 8, 2011
When I attempt to open various programs (Genie Backup, Adobe X for example) I get this error message. I've had problems with the OS, and would really like to back up my files and do a clean install.
View 3 Replies
View Related
May 15, 2012
I am getting gfxui.exe error starting computer win7, media center is not opening pic files
View 1 Replies
View Related
Jul 12, 2012
Recently I noticed an error occurring each time I start my computer and how to correct it? The error is Event ID 7000. It says that "The ASInsHelp service failed to start due to the following error: The system cannot find the file specified. When I search on my computer for anything with "ASInsHelp" in the title it takes me to an application extension file in a folder under Asus called PC Prove II. PC probe II is a program I tried to install but was unable to due so because my mobo did not support it.
Would uninstalling Asus Suite solve this error?
View 14 Replies
View Related
Aug 27, 2012
I had meant to say that all of a sudden I can't use windows installer service I get error code 8007641 or error code 641. I'm unsure why I'm not able to use windows installer anymore and I'm not able to get valuable updates from windows without it.
View 1 Replies
View Related
May 23, 2012
After I downloaded some windows 7 updates I now get this error:[URL]
- When I turn the computer on windows takes a long time to load, about 5 times longer than usual
- My keyboard now does not work (tried others to be sure)
- I have no internet now (this is related to the error, I have read other cases)
The first thing I wanted to try was the winsock reset, but I do not have a keyboard to type with in the command prompt.I have:
OS: Windows 7 home premium 64bit
MOBO: AsRock z77 Pro4-M
View 3 Replies
View Related
Jan 15, 2013
I have created a service using the following command in cmd prompt:sc \computername create servicename binpath= C:WindowsSystem32sam.exeThen in the service list, I could see my service.When I right clicked on the service and clicked on Start , I am getting a pop-up with the following error: Windows could not start the newservice4 service on Local Computer.Error 1053: The service did not respond to the start or control request in a timely fashion.
View 2 Replies
View Related
Jun 12, 2009
A while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
View 3 Replies
View Related
Apr 22, 2012
Currently I am experiencing a major issue with my computer. I will start my computer up and I get a BSOD within about 10 minutes. It has happened 10 times already and I have no idea how to fix it. I have read numerous forums, tried updating graphics card drivers, hard drive drivers. I have performed disk check and run a memory test with no errors. I am not sure if it is a hardware fault or other. The BSOD also occurred while I was in safe mode with netowrking turned on. I have tried doing clean boots and even tried disabling my graphics cards, network adapters and audio drivers. I will post the dump file which is always the same every time the BSOD happens.
Dump File : 042212-9937-01.dmp
Crash Time : 22/04/2012 4:13:52 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
[Code].....
View 1 Replies
View Related
May 29, 2011
I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently used system restore to roll back a few days and now when I try to install have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me: Error 0x80070002.
View 1 Replies
View Related
Jun 11, 2011
A few days ago, I found the media keys on my keyboard stopped working. I tried the keyboard on my laptop, and everything was ok, so reasone dit must be my desktop. I traced the problem to the HID service- on my laptop it was runnig, on my desktop it was not. It is set to start automatically, and when I try to manually start it, it fails and produces error 1083: "The executable program this service is configured to run in does not implement the service."
View 4 Replies
View Related
Jan 19, 2013
I just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot.
View 4 Replies
View Related
Jun 27, 2012
I recently got a virus on my PC and managed to get rid of it. I was using TDSS killer and it somehow removed my svchost.exe -k netsvrs file from registry and I am almost positive this is why I cannot start it. Although I do not know how to fix it. I am running windows 7 ultimate x64.
View 6 Replies
View Related
Sep 7, 2012
I am installing SP1 for windows 7, I get the error 800B0100, I have already tried the system readiness tool 2 times and all it does is install a hotfix.
View 5 Replies
View Related
Jan 19, 2013
I just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot:
View 4 Replies
View Related
May 17, 2011
When I try to install W7SP1, I get an error message after it tries to install after restarting after having downloaded it in Windows Update. It's error code 0x800f0826. IT used to be 0x80071a9, but I fixed that I think.
Note: My laptop does not have a built in disc reader, because of its design, nor did it come with any W7 CD's.
View 5 Replies
View Related
Oct 13, 2012
In an attempt to log on to Windows 7, I could not get to the desktop and the error message: "Failed to connect to a windows service. Windows could not connect to the System Event Notification Service." It also, said, "Location is not available: C:Windowssystem32configsystemprofiledesktop." I ran system restore and was able to get the desk top screen, however, nothing responded and in an attempt to shut down, I had to hit control/alt/del which now has me stuck in Logging off.....
View 4 Replies
View Related
Feb 23, 2011
I installed Service Pack 1 for Windows 7. After it rebooted, on the Windows 7 loading screen it shows "Applying update operation XXXX of XXXX". After a certain number it says "Error applying operation XXXX of XXXX", and then the system proceeds to hang on that screen, meaning that I am unable to access Windows. I try mashing F8 for my life when resetting the computer, but I never get a list of boot options, so I cannot get into Safe Mode or even try the computer's Last Known Good Configuration. The edition of this version of Windows 7 is 64 bit Ultimate. The laptop I am using is also 64 bit Ultimate.
Another thing I want to point out is that both of these computers have been taking an incredibly long time (near 12 hours at this point) trying to download and install Service Pack 1. There is no spyware or anything running in the background. I am fearing that I might get the same error on this machine but I have taken the liberty of creating a System Restore point in the event it happens. I have two other Windows 7 machines in the house (32 bit Professional and 64 bit Home Premium), and both of them installed Service Pack 1 without any kind of problem, and both of those computers installed them rather quickly.
View 7 Replies
View Related
May 7, 2012
I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies
View Related
Nov 17, 2012
I get error code 8007002 when I install language packs(English). I'm sure installed the English language pack on my computer and switch to English. After reboot my computer it show up original(Chinese language).Than I check my computer is show currently Display:English I try to switch to english again but can't find English language pack in my computer.Than I download it again and reinstall again.during install get a error code
8007002.I have tried the Microsoft suggested solution. (deleting Software Distribution, somthing like that)but still not work.
View 1 Replies
View Related
Apr 17, 2012
I have a Windows 7 Home premium x64 OS and it has been giving me more and more problems. I've ran virus scan on AVG and Windows security and came up with nothing. I've tried msconfig and disabling all non-windows services from starting and still nothing has worked! Windows Live ID Sign in use to start after I had to manually start it (even though it was set for automatic), and now it won't even start at all, giving me the error it didn't respond in a timely fashion. My windows task manager doesn't respond, and my system restore gives me an error saying "A volume shadow copy service component encountered an unexpected error".
The problem seemed to start when my web browser would start to not load pages. Then my printer wouldn't work because the "printer spool" service wouldn't start, then of course the hardware and devices in the control panel wouldn't load. After resolving that by manually starting the bluetooth service, the Task Manager stopped working, and the "printer spool" service failed and would not stay started. My start up speed has seemed to have hit a brick wall as well, I've ran start-up repair to no avail. This is my build as copied from newegg.com:
ASUS P6X58-E PRO LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
EVGA SuperClocked 01G-P3-1461-KR GeForce GTX 560
CORSAIR Enthusiast Series TX750 V2 750W ATX12V v2.31
Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Quad-Core Processor
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1066
Microsoft Windows 7 Home Premium SP1 64-bit
Western Digital Caviar Green WD10EARX 1TB IntelliPower 64MB Cache SATA 6.0Gb
This computer was quick as can be when I built it, and had had no problem with it whatsoever until now. I can't think of any program that may be messing with it, I've gone through my installed programs and startup programs and nothing to me is out of the ordinary.
View 2 Replies
View Related
Aug 12, 2012
I am unable to connect to the Internet on wireless home network.I have carried out the following:'Click Start, type services.msc, then press Enter. Scroll down to "WLAN AutoConfig" and right click on it and select Properties. Set it to Automatic and not Disabled, and press the Start button, then click OK.That should start the service.'I received the following message:"Windows could not start Wired AutoConfig Service on local computer.Error 1068: The dependency service or group failed to start."
View 1 Replies
View Related
