Getting Gfxui.exe Error Starting Computer Windows 7?
May 15, 2012I am getting gfxui.exe error starting computer win7, media center is not opening pic files
View 1 RepliesI am getting gfxui.exe error starting computer win7, media center is not opening pic files
View 1 Repliesi have laptop hp model 4420s .when i start window xp i found an error gfxui has encountered a problem and needs to close we are sorry for the inconvenience.
View 1 Replies View RelatedRecently I noticed an error occurring each time I start my computer and how to correct it? The error is Event ID 7000. It says that "The ASInsHelp service failed to start due to the following error: The system cannot find the file specified. When I search on my computer for anything with "ASInsHelp" in the title it takes me to an application extension file in a folder under Asus called PC Prove II. PC probe II is a program I tried to install but was unable to due so because my mobo did not support it.
Would uninstalling Asus Suite solve this error?
error gfxui in windows 7 ultimate
View 1 Replies View RelatedThe following error message appears on start up of Win 7, Pro, 64 bit, Lenovo laptop
C:Windowssystem32GFxUI.exe No such interface supported
Since it started appearing, I am blocked from installing certain programs and/or updates, such as Adobe Reader 11
my gfxui has stopped working. what can I do to fix it.
View 1 Replies View Relatedeverytime i start my pc i see this message
View 1 Replies View RelatedAfter i boot me laptop a small window appears saying"gfxui has an error and is closing".
How do i fix it? Restore seems to not work either.
So last night I went to reformat my laptop, halfway through I thought nah I don't wanna do this anymore so I clicked cancel. Now whenever I try to turn on my laptop, it just gives me the ERROR saying F3-F200-0002 and won't startup. I have tried pressing F8 on startup, but there is no option for recovery or repair in the menu, just safe mode, debugging mode etc.
I was browsing the forums and found out I should press 0 constantly while the laptop is booting and it will bring up the recovery wizard. Anyway, when I do this it says HDD recovery mode then it says Windows is loading files, then it goes to a page saying ERROR F3-FF00-0006.I have been told to download this file (Error code displays "F3-FF00-0006" on Windows 7 models) but I don't know how to make it work on my laptop that is broken (I'm on my nans computer at the moment). I have tried putting it onto a USB and slotting the USB in, but it won't work.
Just recently my computer will not start up! This is all it says "Fatal error C0190003 applying update operation 1802 of 125622 (package...)." It just stays frozen I have to hit the power button to restart. I also tried running it in save mode and it too stops responding, this is all i see
Loading windows Files
Loaded:windowsSystem32DriversNtfs.sys
Loaded:windowsSystem32Driversmsrpc.sys
Loaded:windowsSystem32Driversksecdd.sys
Loaded:windowsSystem32Driverscng.sys
Loaded:windowsSystem32driverspcw.sys
Loaded:windowsSystem32DriversFs_Rec.sys
Loaded:windowsSystem32drivers .......
please wait.........
And nothing. Does not respond.
I received an unmountable boot volume error when starting up my computer last night and came to the conclusion that my 120gb ssd which contained the windows installation has failed.I still have my 1tb hardrive however, if I buy another harddrive or another ssd, will my computer work normally if I install windows with my recovery disk on the new hdd or ssd? Also, is it as simple as placing the new drive in and then installing a copy of windows on it or do I have to do some other steps prior to that?
View 22 Replies View RelatedI have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies View RelatedI have a Hp pavilion dv4-1225ee laptop. I was installing windows 7 in my laptop last night. I was sleepy so I switched off the laptop during the setup. In the morning when I switched on my laptop there is no display. So I attached an external monitor. When I put the windows 7 dvd, the hp logo comes and then there is a dash ( I dont get the press any key to boot) and then I get "Setup is starting services" error. When I press Ok. The same procedure is repeated.
View 9 Replies View RelatedMy friend has a virus on his laptop, which deleted his winnet.dll files. After trying everything he could he decided to do a restore. When he tried to restore he said it was taking way to long and decided to just to turn off the laptop. Leading to more problems, now every time he tries to boot the laptop it shows the loading files followed by the Windows loading screen. After that it shows a blank screen with the mouse. Anyway to fix this.I tried booting from safe mode but that didn't work, it would just crash with a BSOD
View 5 Replies View RelatedWhen my computer boots and after this black screen appear "One of your disks needs to be checked for consistency. You may cancel the disk check, but it is trongly recommended that you continue.Windows will now check disk.Cannot open volume for direct access. Autochk cannot run due to an error caused by a recently installed software package. Use system restore feature from the control panel to restore the system to a point prior to the recent software package installation. An unspecified error occurred (766f6C756d652e63 3f1)"
View 1 Replies View RelatedWhen I attempt to open various programs (Genie Backup, Adobe X for example) I get this error message. I've had problems with the OS, and would really like to back up my files and do a clean install.
View 3 Replies View RelatedA while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
Currently I am experiencing a major issue with my computer. I will start my computer up and I get a BSOD within about 10 minutes. It has happened 10 times already and I have no idea how to fix it. I have read numerous forums, tried updating graphics card drivers, hard drive drivers. I have performed disk check and run a memory test with no errors. I am not sure if it is a hardware fault or other. The BSOD also occurred while I was in safe mode with netowrking turned on. I have tried doing clean boots and even tried disabling my graphics cards, network adapters and audio drivers. I will post the dump file which is always the same every time the BSOD happens.
Dump File : 042212-9937-01.dmp
Crash Time : 22/04/2012 4:13:52 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
[Code].....
I've been experiencing a number of BSOD's in the past 2 days. Up until then my computer has been working nice and dandy. You'll find attached my log, etc all zipped up.
My hardware specs:
Retail windows 7 Professional x64
i5-760
Asus P7P55D deluxe mobo
8GB G.Skill ECO DDR3
Gigabyte 1GB HD 6850
60GB OCZ Vertex SSD
320GB WD
2 x 1.5TB WD
All the parts are 2 years old and under except for the 320GB hd
So after managing to get windows to repair itself: Boot Manager missing. I restarted the computer and now it hangs on "Starting Windows". This happens when trying to boot from CD/ DVD and the HDD. My Windows 7 install disk has no scratches and I can load it in another computer. Also I can boot off other CDs (like Linux perfectly).
View 9 Replies View Relatedmy laptop keeps giving the message, gfxui in not working, what should i do to resolve this?
View 1 Replies View Relatedreinstall the gfxui window 7 to my loptop becouse my gfxui has stopped working
View 1 Replies View RelatedI have an MSI a6205 laptop, and have recently reformatted my computer to reset everything in it. My problem is this: Ever since I re-installed Windows 7 my computer has been starting up, getting to the little 'Starting Windows' animation, then the screen turns off completely, with no back light (the fans and LEDs still function perfectly). The way I have been getting it to work is by turning it on, waiting for the screen to turn off, then tapping the power button and putting it to sleep, after a few seconds I hit the power button again to awake it, and the screen turns on and functions perfectly.
I know this isn't a hardware issue, because I also have Ubuntu 12.04 installed on the machine, and it works perfectly. It's just Windows 7 that is giving me this problem.
what could be wrong with my computer i hit the power button and it start and it says start windows normally but when i click on it after is says windows is starting it goes to a black screen with the cursor i can move the cursor but nothing else. it goes to the black screen before it will let me even log on to my computer
View 1 Replies View RelatedI recently tried to build a computer and failed epically. So I put my hardrive back in my old PC. Upon booting the PC it runs fine until it reaches :starting windows".
Where it freezes, and then restarts.
Computer rebooted after 'starting windows' When starting in safe mode, it rebooted after loading classpnp.sys
This happened after I installed MSE and it detected a Trojan located in c:/windows. On hindsight deleting it was a bad idea.
I've tried using startup repair as well as sfc/scannow. I've also ttried unplugging the hard drives as well as changing the hard drive mode in the BIOS from ide to ADHCI and back.
So i just built a new rig i got everything hooked up and i installed windows 7 ultimate x64. Here are the details.
Intel i7-3820 3.6ghz
Asrock X79 Extreme9
RAM G Skill 4x4gb ddr3
EVGA geforce gtx 680 2gb
Corsair HX 850
rosewill rnx-n250pce wireless network adapter
I got all the motherboard drivers and the video drivers installed then when i installed the drivers for my wireless network card and restarted and it froze on the starting windows screen.
I've been trying everything i can think of to fix this. I pulled the extra memory out, switched the power supply with one from another rig, switched the hard drive out for another one that i had.
after that, since it was a fresh build and nothing was saved on it i tried to reformat the hard drive and re-install windows, but the install disc also freezes on the starting windows screen.
so now i can't get it boot normally, in safe mode, from the disc or from another hard drive. when i try and boot in safe mode it stops at ClassPNP.sys
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies View Relatedwhat do i do to stop gfxui apearing on my screen when i start up on windows 7
View 1 Replies View RelatedI don't know what it trying to say since my min pin stepped on the screen, it's been working fine but this is what showed up when I tried starting up.
View 4 Replies View RelatedLast night i shut down and removed my plug from the pc because of lightning but today i tried to start my pc and it wont start at all. The lights inside my pc are all on so i know there is power going through it but when i press start button it wont turn on so i took my pc removed everything cleaned and refit but the PC wont start the white light thats supposed to come on the POWER ON button isnt glowing but there are other lights inside pc that are on so wht is the problem?
View 1 Replies View Related