I have been getting random BSOD for about two days now. I reformatted my computer today thinking it would help but i did not fix the BSOD. Error code on the BSOD 0x000000f4 (0x0000000000000003, 0xfffffa80096bb3e0, 0xfffffa80096bb6c0, 0xfffff80002ddd510)
View 3 RepliesI got the BSOD when trying to copy files.
View 1 Replies View RelatedI have been getting random BSOD's while I am away from my computer, never while it is in use. They have been occurring about twice a month but I have had two in the past 24 hrs.
I was using old IDE drivers and I should switch to AHCI but I am not sure if that is the problem and I believe I would have to reinstall windows in order to make the switch.
Here are the two most recent reports from Event Viewer. Details are in the attachment.
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa801109a730, 0xfffffa801109aa10, 0xfffff8000358b510). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 072512-50497-01.
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000f4 (0x0000000000000003, 0xfffffa80110a5b30, 0xfffffa80110a5e10, 0xfffff800035ca510). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 072512-39702-01.
Computer is recently built running 2008 server R2. Everything seemed fine until a couple days ago when I started coming home to a BSOD. The code is always F4 (Critical Object Termination) on ntoskrnl.exe save for once when it crashed on a bios update.
Since then I have updated my bios to the latest version, removed a troublesome NIC card (not yet replaced), and tried unsuccessfully to find a pattern to the problem.
sfc /scannow comes back clean. There is no overclocking. Hard drive load does not seem to be a factor. Hard drive scans have come back clean. Disabled Symantec Endpoint Protection with no effect. Malwarebytes reports clean. Not sure what else to do now. I've seen it run for 10 minutes and crash. I've also seen it run for 24+ hours before it crashes again.
Left the system running using Driver Verifier for a while (3+ hours) with no issues.
This has been going on for a while now. I replaced my motherboard and a bad hard drive. I run off an SSD (samsung 830) as my boot drive with a 1 TB hard drive for storage. I ran memtest multiple times with no errors. Could this be a failing PSU?The debug info in WhoCrashed said this was not a hardware issue but most likely a driver.I uninstalled all the audio drivers except the one I used just in case. I reverted all my overclocking for the CPU and ram back to default.
View 9 Replies View RelatedI got the error code: The computer has rebooted from a bugcheck. The bugcheck was:0x000000f4 (0x0000000000000003, 0xfffffa800e87d450, 0xfffffa800e87d730,0xfffff80002fd0510). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 091612-9531-01.[CODE]
View 1 Replies View RelatedMy friend has a virus on his laptop, which deleted his winnet.dll files. After trying everything he could he decided to do a restore. When he tried to restore he said it was taking way to long and decided to just to turn off the laptop. Leading to more problems, now every time he tries to boot the laptop it shows the loading files followed by the Windows loading screen. After that it shows a blank screen with the mouse. Anyway to fix this.I tried booting from safe mode but that didn't work, it would just crash with a BSOD
View 5 Replies View Relatedi used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedJust bout a new tower see the link
http://outboundlink.net/out.php?cid=357&tr=0&url=http%3A%2F%2Fwww.newegg.com%2FProduct%2FProduct.aspx%3FItem%3DN82E16883113103&ref=http%3A%2F%2Fwww.tomshardware.com%2Fforum%2F1290-63-bsod-please
installed windows 7 ultimate. keep getting BSOD with this info:
0x000000F4 (0X0000000000000003, 0XFFFFFA8009857B30, 0XFFFFFA8009857E10, 0XFFFFF80002DD2240).
a friend let me borrow their computer while mine is being de-bugged. samsung 64bit w7 and i had paused a movie at hulu while i took a phone call. i come back like 5 mins later to see the bsod with stop 0x000000f4 (0x000000000000003, 0xfffffa800850db30, 0xfffffa800850de10, 0xfffff800031848b0)physical memory dump failed with status 0xc0000010i've started back up in safe mode, but what happened? is there anything i need to do? can i go back to regular mode
View 1 Replies View Relatedi been getting bsod alot in the past week a few time i got a few with ROQE LESS OR EQUAL something like that but i think i solve that already. now i getting the 0x000000f4 it just appear yesterday when i was watching a movie online snice then no matter if i start it on normal or any safe mode it appear after like 5 second after the restart so i cant get the dump files. the only thing i overclock is the cpu fan thats it.
View 9 Replies View RelatedI got a BSOD while on the internet after about 10-15 minutes. I tried it on Google Chrome, Firefox and IE 9. It also occured when playing runescape on EpicBot. It hasnt occured while i played maplestory. x86 (32-bit) or x64 ? x86 - the original installed OS on the system? Windows 7 Starter - an OEM or full retail version? OEM - OEM = came pre-installed on system - Full Retail = you purchased it from retailer - What is the age of system (hardware)? 5 Months - What is the age of OS installation? 5 Months
View 5 Replies View RelatedI've been having random BSOD crashes for the past week. Also, multiple attempts to fix the BSOD problem by using System Restore has resulted in a BSOD crash.Every BSOD has displayed "STOP: 0x000000F4" To my knowledge, no new hardware has been installed on my computer in several months.
Here is my Windows 7 info:
Home Premium 64 bit
Original OS
OEM
Age of system and OS installation : 2 years
I have attached my BSOD and PERFMON files for your perusal. Hopefully this will be a short and sweet fix. I really don't want to buy a new computer or have to reinstall Windows 7.
0x000000F4
Collecting data for crash dump
Initializing disk for crash dump
I've lurked around on a lot of websites looking over all the information available before posting here. I replaced a Seagate 1TB HDD with a Caviar 1TB, and that is when the problems began. I am leaning towards the Caviar just being a dud of an HDD, but I want to talk this out with some people before I switch my HDD.I've followed all the standard "make sure your collection is turned on" steps in the Startup and Recovery settings. All drivers are up to date. No Malware on the PC. Temps and voltage appear fine. 15 Hours worth of passes on the RAM turned out ok. Chkdsk returned no errors.So, in essence, computer worked fine, switched HDD, and now computer doesn't work. The entire PC is brand new.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
[code].....
A while ago I had some bluescreens with the error-code F4 which I could fix by updating the SSD firmware (from 1.3.0 to 1.3.3). But since then, I sometimes have a bluescreen with the errorcode 101. The bluescreens only appear while I'm playing Battlefield 3 or sometimes when I currently play nothing; in other situations my pc just freezes and I have to use the power button. With Google I found out, that this bluescreen is caused by an error with the processor, so I ran Prime95 and watched the temperatures with SpeedFan. The temperature of the second core was 98�C so I started logging the temperature. After another bluescreen I looked in the logfile but the temperature was only around 40�C. So it seems that nothing overheats (which is also proved by the fact that the bluescreens appears while nothing runs that stresses the hardware alot).
View 1 Replies View Relatedit says memory mismanagement.
View 3 Replies View RelatedI have been receiving bsod stop 0x000000f4, 8008401950,8008401c30 errors.
i5 2500 k
win 7 pro 64 bit
evga gtx570
64 gb crucial ssd
1 tb wd caviar black
sometimes it hangs where you can move the mouse cursor but can't click or close any programs. when i reboot it sometimes freezes at the check ide drive.is it my ssd that is going bad? memory?
For about a month or so I've been getting various BSOD messages. I have ran "chkdsk" and it came back with everything being okay. I've ran "SFC SCANNOW" everything came back fine. I waned to run a few more tests (like the ones testing RAM, but with my computer not really turning on for that long now it seems like it might be too hard to do) From what I've noticed in the dump files I think "USBPORT.sys" and "usbohci.sys" are the main problems, but I could be wrong. I'm not really sure what to do now. It's got to the point where it takes a lot of attempts to just log into my computer and even then it doesn't stay on for long (no more than an hour now). I kind of gave up on everything and decided that installing debian as another OS is the next option. I reset my computer back to factory settings but no luck, I'm still getting the error!For the record I've had this computer for just over a year now, and everything seemed to be fine until recently and now it just seems to keep going downhill. I also can't give you the more recent dump files because my computer would end up BSODing half way though getting them all together, but I do have some recentish ones and it seems to be the same problems happening. However earlier today I got the 3B error which I haven't really got much before.
View 2 Replies View RelatedI've been getting a series of BSODs on my laptop recently. It appears they only occur while uTorrent is running - which is rather puzzling seeing how I've used it for months without issues and I have made no changes to it recently (it also takes some time after the start of the program for Windows to crash, so I'm not entirely sure uTorrent is really the culprit.)Incidentally I am running Windows 7 Home Premium 64-bit on my 1.5 years old laptop. Windows came preinstalled and has been reinstalled by the Sony support less than 5 months ago (together with a new HD and motherboard)[CODE]
View 9 Replies View RelatedAttaching here BSOD crash dump file, BTW i am using Windows XP embedded OS, If this is not the right place to ask
View 2 Replies View RelatedI'm having an BSOD error, and it also refuses to write a minidump and kerneldump. So I can`t use any analysis tools. And yes, it's enabled!
Stop message: *** STOP: 0x00000F4 (0x0000000000000003, 0xFFFFFA800F209B30, 0xFFFFFA800F209E10, 0xFFFFF80003787240)
After restart it sometimes does not find the primary hard drive. The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all. I did a checkdisk and it turned out clean.
I've been getting the BSOD sporadically for quite some time now and I am finally fed up. Here is the Stop error information:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.768.3
Locale ID:1033
I've attached the dump file referenced above.
Here are some details on my machine:
Gateway DX4300
AMD Phenom(tm) II X4 810 Processor 2.60 GHz
8GB RAM
Windows 7 - 64-bit, full-retail
Hardware purchased in 2010, Windows 7 upgrade occurred early 2011. Also, there are a ton of files in my minidump in addition to the one attached, is this normal?
BSOD : 7a Error code AND Blue screen second time
View 1 Replies View Related-System -Provider[ Name] Microsoft-Windows-Kernel-Power[ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID41Version2Level1Task63Opcode0Keywords0x8000000000000002-TimeCreated[ SystemTime] 2013-01-20T05:40:27.336841800Z EventRecordID241661Correlation-Execution[ ProcessID] 4[ ThreadID] 8 ChannelSystemComputerShelby-HP-Security[ UserID] S-1-5-18
-EventDataBugcheckCode278BugcheckParameter10xfffffa8009b434e0BugcheckParameter20xfffff88000e5340cBugcheckParameter30x0BugcheckParameter40x2SleepInProgressfalsePowerButtonTimestamp0
[code]....
and this is the code from the blue screen itself stop 0x00000116 (0xFFFFFA8009B434EO, 0x000000000000000?, 0x0000000000000002) i took a picture of it with my camera but missed that last digit thus the ? below that on the screen was this
atikmpag.sys - address FFFFF88000E5340C base at FFFFF88000E4C000. DateSt?? 4da507aa
im lost i tried searching these codes and some came up with random stuff (some of it worried me like the remote access stuff) and others dont seem to exist at least in a googleable database?
It seems I've been having random BSOD Stop errors ever since I put my new PC together about a month ago. I'm not sure what's causing it, and it's happened when I've been doing different things, but it almost seems to happen more frequently when I'm listening to Pandora Radio on my web browser (chrome).Switched my BIOS from AHCI to IDE (read on google this fixed some issues). Did not fix the issue.Read the windows website and attempted to get a hotfix for SATA hard drives (something about them not waking up in 10 seconds). Hot fix claimed it could not install on my computer. Gave up on it.Some system information (copy-pasted from newegg, forgive me if it's a lot of uselessness):
CPU: Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623I52500K
Motherboard: ASUS P8P67 PRO (REV 3.1) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Video Card: EVGA 012-P3-1571-KR GeForce GTX 570 HD w/Display-Port (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
Boot Drive: Corsair Force Series 3 CSSD-F120GB3A-BK 2.5" 120GB SATA III Internal Solid State Drive (SSD)
RAM: G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL
Storage HD: SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
Windows_NT6_BSOD_jcgriff2 attached with PERFMON.html file inside the folder.
My computer has recently had this problem where it cannot continue to run normally for more that 5 minutes or so before it slows down then BSODs. It seems to start up normally and everything works just fine for a short amount of time until applications stop responding. Sometimes the taskbar disappears and there's an error message with the title of "jusched.exe - Application Error" without the quotes. When I click ok to terminate the program I just see my wallpaper for a few seconds before it BSODs. Other times it just BSODs after applications stop responding.The part after STOP always seems to be 0x000000F4, but I'm not sure about the rest.I'd also like to know if I need to wait a certain amount of time before I can shut down my computer during the BSOD. It seems to say something like "initializing the disk for dumping" for quite some time.
View 8 Replies View RelatedHere comes the BSOD problem:
BCPCode:116
BCP1:87AC6510
BCP2:906EBA80
BCP3:00000000
BCP4:00000002
I've had these problems for a few months so I just started using our shared family computer, and recently I haven't been able to get access to it that often. Because I had so many problems with my computer, I tried clean installing it, which helped for around a month. Now it is back to BSODS. The error code I mainly get is the 0x00000A.
System Specs:
Windows 7 Home Premium x32 bit Build 7600
Processor:AMD Athlon(tm) II x4 635 Processor, 2.90 GHz
Graphics: ATI Radeon HD 5570
Memory: 2040MB RAM
Motherboard: M4A78LT-M LE
The OS came in-built with the computer, but since then I've re-installed it around 5 times.
what seems to have caused it? i was just on google chrome on Internet, everything was working fine then bam, blue screen out of nowhere. attached is the dump files etc
- windows 7 x64
- full retail version of windows 7 ultimate
- hardware is only 3 years old
- installed windows 7 ultimate in 2011 (i think)
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
ive got a Problem installing build 7100 on my pc. if i boot from dvd, iam going well until the wallpaper and the mouse appears. after 5mins of waiting here iam getting a BSOD with an 0x0000007F Error Code.
If i try to install b7100 into a VM (with the DVD) it works!
And if i try to install/update the pc via the booted windows 2008, it also works!
Only if i boot from the dvd and try to install, it failse.
Iam allready tryed various options (remove USB,remove NIC, burn again(slow), vertify md5/sha1,removed raid) but always the same story.