BSOD After The Machine Idles For A While, Error 0x00000050
Mar 9, 2012
I'm brand new to the message board and have been experiencing BSOD messages for about a week. In the BSOD it said something about; "PAGE_IN_NONPAGED_AREA" Also here were some error codes it gave off too in the BSOD.
Technical Information:
STOP: 0x00000050 (0xFFFFF87FFFCCBA53, 0x0000000000000008, 0xFFF87FFFCCBA53, 0x0000000000000005)
Here are some of my hardware specs:Windows 7 Ultimate 64bit w/Service Pack 1 Intel Core2 Quad Q6600 @ 2.40Ghz Asus P5N-D (socket 775) motherboard 8GB DDR2 @ 399Mhz Nvidia GeForce 8800GT 768MB
View 4 Replies
ADVERTISEMENT
Jul 22, 2012
with BSOD. Its happening random.[CODE]
View 1 Replies
View Related
Apr 30, 2012
After recently installing a new RAM DIMM to my PC, once in a while Windows 7 Ultimate 32-bit crashes.
I'm not certain, but I think the only error I've received on BSoD is "PAGE_FAULT_IN_NONPAGED_AREA" (last time the parameters were 0x00000050 (0x80eac2dd, 0x00000000, 0x9e306c99, 0x00000002)). I'll attach the mini-dump files. I'm pretty sure is related to my RAM, because it's mixed. I sure hope my new DIMM isn't faulty. I'm also attaching a report from Everest about my PC.
P.S.: I've also recently played a bit with my BIOS to OC my CPU a bit. CPU voltage is at 1.45V, memory is set to 1.85V, DDR-2 667, 5-5-5-18-2T.
P.P.S.: Forgot to mention... I've run memtest86+ overnight (about 8 hours) - no errors... Also ran Windows' memory test - no errors.
View 3 Replies
View Related
May 27, 2012
I've come across this BSOD a few times when gaming recently and decided to try to solve what is causing it. Here is the minidump file of the crash:
View 4 Replies
View Related
Dec 5, 2011
Been having random BSOD for the past week or so. Started on Sunday (11-27-11),where I had come back to my machine and it had been restarted... after logging in, find out that it was a BSOD. I then proceded to have 3 different BSOD events on Monday, which led me to perform a memtest on Tuesday morning to see if my memory was bad. After 2 full passes (I know, not a full 8), it didn't seem to be that, so I went ahead and did a System Restore from a backup from roughly 2 weeks prior. This led to solid performance for the next week, until this morning (Monday, 12-5-11) when I had another. All BSOD events seemed to occur at random times, so I can't say they were triggered by a specific event to the best of my knowledge.
I had performed the BSOD dump collection and Performance Monitor Report on last monday as well as doing the BSOD dump collection today. Regretfully, I cannot get the Performance Monitor to stop running today, so hopefully just the dump collection will be enough.As for my computer components:- HP Elite 7000 MT machine- Windows 7 Ultimate x64- Not the version originally installed on system- Hardware is a little over a year and a half old- 64-bit OS (originally had x86) wasinstalled 13 months ago.- Only non-stock hardware would be an added harddrive (just a backup drive, no OS on it), and I added 4GB more RAM (alongside the original 4GB) back in January.
View 1 Replies
View Related
Feb 12, 2012
New to these forums.
[code]...
View 9 Replies
View Related
Aug 31, 2012
My pc is working perfectly, but freeze with BSOD every moment (can be 10 min, 30 min, an hour, or couple hours), sometimes, leave me alone, but always come back
View 6 Replies
View Related
Dec 25, 2012
I usually get BSOD once a game but not every game, more of it during the start of a DOTA 2 game. The most recent one I had showed an error: PAGE_FAULT_IN_NON_PAGED_AREA stop: 0x00000050 etc.. This requires me to reboot my computer 4-5 times daily..
View 1 Replies
View Related
Aug 6, 2012
Every time I start up Autodesk 3ds Max 2013, I get a BSOD shortly after it begins initializing with the error of PAGE_FAULT_IN_NONPAGED_AREA. Everything else runs fine, and Autodesk products are the only things that cause any form of error. What do I do to make this no longer happen?
View 7 Replies
View Related
Apr 22, 2012
Currently I am experiencing a major issue with my computer. I will start my computer up and I get a BSOD within about 10 minutes. It has happened 10 times already and I have no idea how to fix it. I have read numerous forums, tried updating graphics card drivers, hard drive drivers. I have performed disk check and run a memory test with no errors. I am not sure if it is a hardware fault or other. The BSOD also occurred while I was in safe mode with netowrking turned on. I have tried doing clean boots and even tried disabling my graphics cards, network adapters and audio drivers. I will post the dump file which is always the same every time the BSOD happens.
Dump File : 042212-9937-01.dmp
Crash Time : 22/04/2012 4:13:52 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
[Code].....
View 1 Replies
View Related
Jan 17, 2013
Have recently completed a clean install of Windows 7 Home Premium x64 on a customers laptop, installed Microsoft Office Home and Student 2007 x32 and put all his data back on there.Since then hes been getting BSOD's. Have downloaded and installed Blue Screen viewer and have found that im getting 2 different error codes.
1, Stop Error 000000050 PAGE_FAULT_IN_NONPAGED_AREA
2, Stop Error 000000109
I have tested the RAM using memtest overnight and has 15 passes. The problem is i cant reproduce this issue, it seems to be completely random in falling over. I have had it on a test bench for 48 hours running PCMARK 7 and it hasnt fallen over once and then when i have given it back to the customer he says within the hour it was doing it again. I have asked him if there is something specific he is doing when it crashes and he says no its just general use.
View 4 Replies
View Related
Jun 28, 2012
I am experiencing issues with my ASUS graphics card and my Intel HD display driver. Whenever I am playing a videogame or doing something that is graphics intensive, my display freezes and I either have to reboot my machine or sometimes the display unfreezes and I am allowed to resume my activities. I originally had graphics driver 295.73, but I upgraded to version 296.10 when it came out. I still had the same issue when I upgraded my driver so I rolled back to version 295.73. I kept bouncing back and forth between the two drivers and I even tried going into safe mode to install the drivers. Twice while I was using AutoCAD and playing a videogame, the display became distorted and showed pixelated colors.
I installed the 301.24 driver when it came out on May 22nd, but the problem occurred again while I was playing a game and while I was in AutoCAD. In the rare instances that my display froze and unfroze, I received a windows notification from the windows event log stating that my driver 295.73, 296.10, or 301.24 failed. I have performed numerous diagnostics and stress tests using Ultimate Boot CD. My memory tests have checked out fine and so have my hdd and ssd tests. The only thing that sticks out is that my southbridge temperature, my CPUTIN according to HWMonitor, is at a constant 60 degrees. It never changes or fluctuates.
View 2 Replies
View Related
Mar 10, 2012
Getting random BSOD's during every now and then. Especially when playing games (ANNO 2070, for ex.). I've run CHKDSK(inc. physical disk scan), and Memory Tests and found no errors. I am using NOD32 AV even though the PERFMON report states otherwise.
View 9 Replies
View Related
Dec 21, 2009
I just built my first computer and am now attempting to do an install of Windows 7 Professional (64 bit). I am encountering BSOD during the install.
I downloaded the ISO and burned it to disc and had BSOD issues. At first I thought possibly that it was the ISO or the burn, but now I am using a disk that has been used successfully on other computers.
My specs are as follows
Gigabyte P55-UD4P (F3 bios)
Intel i5 750
4 GB of Crucial DDR3 RAM (2x2GB)
WD Caviar Black 640 GB Hard drive
Sapphire Radeon 5850HD
I have adjusted the BIOS to boot to the DVD drive first. In addition, the BIOS came not set to AHIC (I think that is what it is called. I heard that it can cause problems.) I have made no changes in the BIOS.
I have encountered BSOD at different times. First I got it during the Windows 7 installation, at 1%. Now I've gotten it before you are even able to select the language to install it in (the first screen you are presented with I believe).
I have gotten different errors, but unfortunatly I only wrote one of them down, the most recent. It says "PAGE_FAULT_IN_NONPAGED_AREA" and the tech info says: "STOP: 0x00000050"
I really don't know exactly where to start to troubleshoot this. I really don't know if it's a hardware or software issue.
View 3 Replies
View Related
Aug 19, 2012
System Spec:
Intel Core i5-3570k
Asus P8Z77-Pro M/b
16GB DDR3 1600MHz RAM (2x8)
2x2TB 7200RPM, 64MB cache HDD's
1x500GB 7200RPM HDD
nVidia GeForce 8800GTS
Creative SoundBlaster Xtreme Gamer sound card
Linksys WMP600N wireless PCI card
Corsair HX650 PSU
1x Blu-Ray optical drive
1x DVD optical drive
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
0x0000001a - MEMORY_MANAGEMENT
0x00000050 - PAGE_FAULT_IN_NON_PAGED_AREA
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.
View 1 Replies
View Related
May 23, 2012
I have trawled the forums and tried what seem to be the usual tricks.
Including: Running anti virus (AVG)
Running a registry cleaner
Running a Malware cleaner
Replacing old RAM with newer and more RAM.
Removing Daemon tools
Some of these measure have provided (the illusion of?) stability, but never for more than a day. SO, I'm a bit stumped and hope someone can advise. Perhaps interestingly I am having some problems updating my ATI driver, it is 12.3 instead of 12.4 at the moment. I have included specs below, unfortunately I don't seem to be able to attach Minidumps.
Intel� Core™ i5 750 Quad Core Processor (2.66GHz, 8MB Cache) - LGA1156
Windows 7™ Home Premium with Service Pack 1, 64-bit - English
Midi-Tower ATX Chassis + 550W PSU + CardReader- Silver
[Code].....
View 1 Replies
View Related
Aug 2, 2012
I have been trying to fix this computer and i cannot get this BSOD to go away. I have installed new RAM and re-installed windows to no avail. I have updated the drivers for the video card and the cpu.
View 3 Replies
View Related
Nov 8, 2012
When my computer start everything works perfect and runs fine,but when i start Leageu Of Legends i will get after 20 minutes sometimes more sometimes less the BSOD.Yesterday i didnt had anny bsod when playing Leageu of legends.today i did get the problem again.week ago same story.I think i got a problem with my RAM or something else.I get the error MEMORY_MANAGEMENT (0x0000001a) or 0x00000050.
Computer specs:
500gb harddisk,
windows 7 ultimate 64bit,
nvidia gtx550ti 3gb,
8gb ddr3 ram,
MSI 760GM-P23(FX)
View 1 Replies
View Related
Oct 18, 2009
Whenever my PC is idle for a while (haven't timed it but I think it's about 30 min.) it will switch to the blue login screen. I've never actually seen the login screen since I don't use a password, but I'm assuming it is. Blue screen, shows my name and icon, ease of use button on bottom left, etc. Anyways, I don't really want Windows to DO this, so can someone tell me where I can change those settings? I already tried changing all of the Power settings but it still does it. Oh, BTW I do not use a screen saver either.
View 4 Replies
View Related
Dec 18, 2011
It appears as if if I have a huge memory leak as a fresh boot with minimal start-up programs idles at 1.85gb used... nothing showed in task monitor so I dug deeper with RamMap... I've included a bunch of screen shots and can't for the life of me figure out what this is. I've uninstalled anything I didnt use + cleaned all the temp files and cache + ran Malware + did a virus scan.
View 6 Replies
View Related
Mar 30, 2012
I have screensaver disabled through personalize menu and command prompt. I have sleep/hibernation disabled through power options and reg edit. I have every power option set to not hibernate, sleep, go to screen saver, or anything. I have disabled every possible thing I could find that would cause a blank, black screen to appear whenever I don't touch my pc for an amount of time. And yet, I still get the black screen when my pc is idle. Why? How can I stop it? It's annoying and I have zero interest in having it.
View 9 Replies
View Related
Dec 1, 2009
I have windows 7 64 bit on a home grown computer and experince a freeze once the pc is left idle for along period. It isnt consistent in that some of the time I can shake the mouse and after a short nonresponse period the os kicks in. Could use ideas and/or help.
View 4 Replies
View Related
Mar 27, 2011
i have blue screen on new machine pc with news components, asus sabertooth x58, intel i7, hd caviar black wd, ddr3 corsair 1600 etc.
the blue screen is every time, on internet, copy files, etc..the last blue screen say interrupt exeption not handled, but in the others times, is different..
View 2 Replies
View Related
Nov 11, 2009
I have a samsung R517 laptop working on Windows 7 ultimate 32 bit edition. have the system for just 3 days now and i am getting error messages such as the display driver has recovered from an error. And finally got bsod 0X000000116.
View 7 Replies
View Related
Nov 4, 2011
I just put together this computer on the 2nd and since then I've blue screened 9 times. I've done some research and all the drivers are up to date, to the best of my knowledge, and I have installed all the updates from Windows Updates? I'm not sure what to try next.I downloaded the 'SF Diag Tool' and have attached both the minidump and the system information.
View 1 Replies
View Related
Jan 23, 2012
I usually have to boot my machine twice. I boot the first time, log into my (domain) account, and once windows loads, I get a BSOD. After that, if I reboot, the system works all day.
This happens if I'm bringing it out of sleep or hibernate too, but it has to be inactive for a few hours for it to give a BSOD.
I am running a Dell Latitude D620.
Windows 7 Pro 32 bit (fully licensed)
4 GB RAM
Intel T2500 2.00 GHz processor
Joined to a domain
Attached is the BSOD reports requested.
View 9 Replies
View Related
Apr 2, 2012
I've been having problems with my mobile broadband too - it keeps saying that it's not connected. Only happens on this machine. I think the two incidents might somehow be related (they both started happening around the same time).
I'm running Windows 7 Home Premium 32bit, retail OS installed early 2011 My original OS was Windows XP Machine was built in 2008, adding a new graphics card in 2011.
PS. I noticed that the System Health Report said I wasn't using anti-virus. I'm currently running AVG Free 2011.
View 3 Replies
View Related
Apr 30, 2012
I have an Asus G51 gaming series laptop. It has an intel core i7 with 4G of RAM and a GTX 260M for a graphics card. I've been getting a BUGCODE_NDIS_DRIVER BSOD almost every-time i use my machine for over 20 mins. My machine was working fine , until i bought an external monitor and started using that over HDMI. Now even though the other monitor is plugged out , BSOD still happens regularly.
OS : Windows 7 Home premium 64 bit
Processor : Intel Core i7 Q720
Memory : 4GB DDR 2
Video Card : 1 GB Nvidia GTX 260M
View 1 Replies
View Related
Jul 17, 2012
My computer has been running smoothly for a long time and now all of a sudden it crashes every hour or two.
View 1 Replies
View Related
Sep 14, 2012
I have a sony vaio laptop that i bought 3 weeks back. All was well until tueday night. I believe My laptop started giving bsod after restarting from an update. I tried system restore to an earlier restore point. If I keep my laptop on for some time and then when i restart it i am getting this error. if i switch it off and start again then i can repair or start normally.
View 7 Replies
View Related
Jul 18, 2012
I have a workstation that I just setup and the user is reporting BSODs on the system randomly. I've done all the standards stuff:
- Updated to the newest drivers from the vendor's web site
- Removed and reinstalled anti-virus
- Run chkdsk on the system volume
- Ran memtest86
- Looked into the bugchecks that came up. They are all event id 1001, but the bug check seems to change almost every time. I've noted bugchecks 3b, 0a, 7f, c4, 24, 101, 1a, 1e, 7e, and 4e. I didn't see anything promising, but I'm not exactly sure what to look for.
System is:
-Windows 7 pro 64-bit
-OEM install
-Compaq 100B SFF PC (Adina)
-AMD E-350 Processor @ 1.60Ghz
-4GB RAM
While it's an older system, we bought it new recently from tigerdirect. Guessing it was overstock. It's perfect for our simple needs on this workstation as far as power goes. Just need to resolve the BSOD issue. BTW, the other unit that is exactly the same does not have any problems.I have an exact match to this system, so I'm going to swap the hard disks between the functioning system and the one with BSOD problems. Once I note where the BSOD ends up, I'll have a better idea whether it's h/w or s/w. I'll post the information, but it is doing a BSOD every couple of days, so it may be a bit.
View 3 Replies
View Related
