I have a sony vaio laptop that i bought 3 weeks back. All was well until tueday night. I believe My laptop started giving bsod after restarting from an update. I tried system restore to an earlier restore point. If I keep my laptop on for some time and then when i restart it i am getting this error. if i switch it off and start again then i can repair or start normally.
View 7 RepliesI've been having problems with my mobile broadband too - it keeps saying that it's not connected. Only happens on this machine. I think the two incidents might somehow be related (they both started happening around the same time).
I'm running Windows 7 Home Premium 32bit, retail OS installed early 2011 My original OS was Windows XP Machine was built in 2008, adding a new graphics card in 2011.
PS. I noticed that the System Health Report said I wasn't using anti-virus. I'm currently running AVG Free 2011.
I have one Dell Inspiron N5110 laptop.i was installed win 7 OS in it. after successfully installed my OS, machine is restarting but not enter into desktop.(I think not booting properly)
View 2 Replies View RelatedMy OS is Windows 7 Ultimate x64 Full Retail.I bought the laptop a year and half ago.The HDD broke down about 2 months ago and I ended up replacing it over the break. After replacing the HDD, I installed Windows 7 a first time and while doing all the Windows updates, I encountered a BSOD after which Windows would not start properly. Fearing defects in the new HDD I installed linux, ran the SMART tool and saw nothing wrong. So I install Windows 7 again a week ago Sunday, and did not do all the updates because I was on slow internet. I just did the Windows update a few hours ago and after restarting this BSOD occurred.
View 5 Replies View Relatedsometimes when I restart my computer I get BSOD. Sometimes the computer starts up fine, and crashes on desktop. It never crashed when playing games (Crysis, BF3, etc).I have Windows 7 x64 the computer has a little more than 2 years. I am not sure what's the age of the OS installation but I would say that it has around 6 mounths.
EDIT - System specs are:
Cpu - Core I7 860 2.8GHz
Motherboard - Asus P755D
RAM - G.Skill Ripjaws CL7 1600 MHz
Graphics Card - POWERCOLOR HD5870 1GB
HDD - Samsung F3 500GB
Power Supply - Corsair HX-650W
I encountered BSOD attack as I was restarting my pc. I am not able to run the SF Diagnostic Tool as i cannot start my pc and if i try to run it in the safe mode or Directory Services Restore Mode then the explorer freezes.(Yes, I disabled my antivirus before running it in the DSR mode) Meanwhile, I have this detail.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.256.1
[Code]....
ok my computer crashes and works then crashes and works. i did system restore 2 times and my issue is not resolved. plz help me. i get the equal_or_not_less error blue screen error. ive uploaded the zip file eith my dump files from the bsod posting thread on here.
View 1 Replies View Relatedtoday I was playing minecraft, and the screen just froze, I tried alt+tab, ctrl+alt+del, esc, and all the other keys everyone presses when in panic. But then I realized that nothing would happen and I shut the pc down (I unpluged the energy source).I turned on the pc again, and entered the game again, but the screen blacked out, and I shut it down again. Thinking it had something to do with some bug in my minecraft world, I deleted it and started another one, but again the screen froze and I was forced to shut it down again.At first I thought it was overheat, so I just waited some minutes before turning it on again. When I turned it on, I opened the internet browser (google chrome) and started searching for video cards (at that time I thought that was the problem) but the screen went black again, and this time the computer didn't turn on. On startup, normally the colors are white on black, but it was showing some magenta spots. and after a Blue Screen the pc rebooted and started everything again, asking if I wanted to start windows normally (like it does when you unplug the power source --'), showing BSOD and rebooting. the blue screen showed this:
"a problem has been detected ... windows was shut down... if this is te first time... if problems continue, blah,blah,blah,
Technical information
*** stop 0x00000116 (0xfffffa8003391450, 0xfffff8800f443cd8 0x0000000000000000, 0x0000000000000002)
*** nvlddmkm.sys - adress fffff8800f443cd8 base at fffff8800f2d3000, datestamp 4e391010
I have a Dell laptop, XPS 15, my specs are on the attached file. I used to play Diablo 3 on this laptop, highest settings possible, and it never gave me any problem. Now i quit Diablo and moved to an online game, called Atlantica Online (Atlantica Online), and then the problems started. I guess it's important to say i play this game for a very long time now (3~4 years) and never had any trouble with my old PC (a Quad-core, 4gbs ram, 1gb video), and my brother also play this game on his laptop (a i5, 4gbs ram, onboard video).
When i try to run it on my Dell, first, it started to overheat. I started monitoring my CPU and GPU temperature, and it'd go from 50C/122F (idle) to 90C/194F just a few seconds after I started the game. To solve this problem, everytime I run the game, I run this app: ThrottleStop (ThrottleStop - Performance Adjustment Tool for Core 2 / Core i CPUs) so i can 'underclock' my CPU to 75% and turn off the Turbo feature of my i7 (Note: I also tried to run the game without underclocking my CPU and it restarted anyway).
When the problem occurs, screen goes blue, sometimes purple, there are some squares, like a chess board, it's all messed up. I see the mouse still works (it moves a big square when i move the mouse) and keyboard still works aswell (capslock light). But if i try to press any button, the computer will freeze and i have to hard reset it. I really like this game (it's the only one i play actually, but if it's the game's fault, i'll stop it, just want to be sure).
i have blue screen on new machine pc with news components, asus sabertooth x58, intel i7, hd caviar black wd, ddr3 corsair 1600 etc.
the blue screen is every time, on internet, copy files, etc..the last blue screen say interrupt exeption not handled, but in the others times, is different..
I have a samsung R517 laptop working on Windows 7 ultimate 32 bit edition. have the system for just 3 days now and i am getting error messages such as the display driver has recovered from an error. And finally got bsod 0X000000116.
View 7 Replies View RelatedI just put together this computer on the 2nd and since then I've blue screened 9 times. I've done some research and all the drivers are up to date, to the best of my knowledge, and I have installed all the updates from Windows Updates? I'm not sure what to try next.I downloaded the 'SF Diag Tool' and have attached both the minidump and the system information.
View 1 Replies View RelatedI usually have to boot my machine twice. I boot the first time, log into my (domain) account, and once windows loads, I get a BSOD. After that, if I reboot, the system works all day.
This happens if I'm bringing it out of sleep or hibernate too, but it has to be inactive for a few hours for it to give a BSOD.
I am running a Dell Latitude D620.
Windows 7 Pro 32 bit (fully licensed)
4 GB RAM
Intel T2500 2.00 GHz processor
Joined to a domain
Attached is the BSOD reports requested.
I have an Asus G51 gaming series laptop. It has an intel core i7 with 4G of RAM and a GTX 260M for a graphics card. I've been getting a BUGCODE_NDIS_DRIVER BSOD almost every-time i use my machine for over 20 mins. My machine was working fine , until i bought an external monitor and started using that over HDMI. Now even though the other monitor is plugged out , BSOD still happens regularly.
OS : Windows 7 Home premium 64 bit
Processor : Intel Core i7 Q720
Memory : 4GB DDR 2
Video Card : 1 GB Nvidia GTX 260M
My computer has been running smoothly for a long time and now all of a sudden it crashes every hour or two.
View 1 Replies View RelatedI'm brand new to the message board and have been experiencing BSOD messages for about a week. In the BSOD it said something about; "PAGE_IN_NONPAGED_AREA" Also here were some error codes it gave off too in the BSOD.
Technical Information:
STOP: 0x00000050 (0xFFFFF87FFFCCBA53, 0x0000000000000008, 0xFFF87FFFCCBA53, 0x0000000000000005)
Here are some of my hardware specs:Windows 7 Ultimate 64bit w/Service Pack 1 Intel Core2 Quad Q6600 @ 2.40Ghz Asus P5N-D (socket 775) motherboard 8GB DDR2 @ 399Mhz Nvidia GeForce 8800GT 768MB
I have a workstation that I just setup and the user is reporting BSODs on the system randomly. I've done all the standards stuff:
- Updated to the newest drivers from the vendor's web site
- Removed and reinstalled anti-virus
- Run chkdsk on the system volume
- Ran memtest86
- Looked into the bugchecks that came up. They are all event id 1001, but the bug check seems to change almost every time. I've noted bugchecks 3b, 0a, 7f, c4, 24, 101, 1a, 1e, 7e, and 4e. I didn't see anything promising, but I'm not exactly sure what to look for.
System is:
-Windows 7 pro 64-bit
-OEM install
-Compaq 100B SFF PC (Adina)
-AMD E-350 Processor @ 1.60Ghz
-4GB RAM
While it's an older system, we bought it new recently from tigerdirect. Guessing it was overstock. It's perfect for our simple needs on this workstation as far as power goes. Just need to resolve the BSOD issue. BTW, the other unit that is exactly the same does not have any problems.I have an exact match to this system, so I'm going to swap the hard disks between the functioning system and the one with BSOD problems. Once I note where the BSOD ends up, I'll have a better idea whether it's h/w or s/w. I'll post the information, but it is doing a BSOD every couple of days, so it may be a bit.
My problem is on a Media Center machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x2 GB Kingston ram
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB
My previous setup was with a AMD 240e. I use Microsoft Security Essentials for antivirus and have firewall turned on. The Media Center machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings. Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wake up is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity. I have made several new install and tried to exclude the SSD and install a 32 bit Win7 - but the BSOD still occurs 4-5 min after awake.
i have Lan, all computers are windows 7 proffisional and one machine is windows 2003 , workgroup . i made shared folder in windows2003 , some computers can access the shared folder and others can not.when i open network , i see the 2003 computer, when i try to access it , it asked for user name and password. the user is administrator for all , when i enter the user and password from many computers in the lan it is work correctly but in one machine with the same settings its says , you have no permession to access this computer.
View 3 Replies View RelatedI am experiencing issues with my ASUS graphics card and my Intel HD display driver. Whenever I am playing a videogame or doing something that is graphics intensive, my display freezes and I either have to reboot my machine or sometimes the display unfreezes and I am allowed to resume my activities. I originally had graphics driver 295.73, but I upgraded to version 296.10 when it came out. I still had the same issue when I upgraded my driver so I rolled back to version 295.73. I kept bouncing back and forth between the two drivers and I even tried going into safe mode to install the drivers. Twice while I was using AutoCAD and playing a videogame, the display became distorted and showed pixelated colors.
I installed the 301.24 driver when it came out on May 22nd, but the problem occurred again while I was playing a game and while I was in AutoCAD. In the rare instances that my display froze and unfroze, I received a windows notification from the windows event log stating that my driver 295.73, 296.10, or 301.24 failed. I have performed numerous diagnostics and stress tests using Ultimate Boot CD. My memory tests have checked out fine and so have my hdd and ssd tests. The only thing that sticks out is that my southbridge temperature, my CPUTIN according to HWMonitor, is at a constant 60 degrees. It never changes or fluctuates.
I have de-commissioned an older machine that I had installed W7 on, I wish to install the W7 from this machine to another, is this possible -if so how?I think I have read somewhere, that once W7 is installed on a machine - it can NEVER be used on any other machine, is this correct?
View 1 Replies View RelatedI replaced an XP machine with a Win7 machine. When I VPN into our 10 network I can't get to any 192.168 addresses. The XP machine works fine only the Win7 doesn't. I looked at a lot of settings but I can't find anything out of sorts.
View 3 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "share bear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents..i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen
I have a small network of six computers. Five of them run XP and I just added a Windows 7 machine. I've got a Microsoft Access 2003 database that all of the computers share that is hosted on one of the XP machines. The Windows 7 machine can access the Access database through the network just fine, as long as no one else is accessing it. However, if someone else on an XP machine on the network is using the file, it won't open on the Windows 7 machine. Doubling clicking the file on Windows 7 gives me the circling blue icon for a second or two, then nothing happens. If the XP user exits the database, then I can open it fine. Permissions on the XP that is hosting the database is set to allow everyone. And all the XP machines can access it at the same time.
View 9 Replies View RelatedI have Windows Seven 7600 and i'm trying to share files with a XP SP2 machine!
Problems:
-XP machine can see Seven machine but can't access shared folders!
-Seven machine can see XP machine but when i'm trying to see shared folders it gives me an error(see on screenshot)
-Network map doesn't work(see screenshot)
-Both machines have same workgroup MSHOME but when i go to homegroup it says there is no people in the homegroup!(see on screenshots)
Other info:
Before i couldn't turn network discovery on,every time i was set it to on he was going to off so I searched on this forum(great forum) and finally i was able to turn it on,maybe others have this problem so there what i did:i go to start=>run=>services.msc and i turned on(also i switched them to automatic startup) these services DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services.
IPv6 currently is enabled!
well i'm try to copy files from my xp machine to my win 7 machine i can see the xp machine but i get a message that says "make sure that the xp machine allow incoming connections for file sharing" and i have done just that i think but its a no go i've just about everything.
View 1 Replies View RelatedInstalling W7 using an old HDD on an old machine to install W7 on a new SSD to be used on a new machine.I'm currently using this old machine from '09 and its performance levels have died down a lot. I bought all the components to build a new machine except I didn't want to spend extra money on another HDD to install the OS on my new 180GB Intel SSD. So basically, I want to use the HDD from my old computer, install W7 onto the SSD, then transfer the drive to my new computer, and use it on the machine and just reinstall all my other files.
View 5 Replies View Relatedive got 2 computers hooked up to a router by Ethernet sharing an internet connection, the internet connection works fine for both computers. i would like to share documents also between the computers
-one is a windows xp 32
-one is a windows 7 64
ive set up many networks in the past with a bunch of xp machines without any trouble but now i am having trouble my first step was on the windows 7 machine, i went to control panel -> network and sharing center -> setup a connection or network -> set up a new network this is where i believe i am making a mistake of some kind, it seems that the windows 7 machine is assuming that i want to set up the network wirelessly, when it is connected to the router via Ethernet. it simply brings me to a screen that says choose the wireless router or access point you want to configure, and hangs there with a greyed out next button everything seems to be going fine on the xp machine, i created a new network called "sharebear", told it that the computer connects through a residential gateway, enabled file and printer sharing, rebooted the machine, and confirmed that there was a new folder in the network places for shared documents.i went back to the windows 7 machine where it was still hanging, rebooted it, looked for the new network in network and sharing center and it wasn't there, i tried again to "set up a new network" on the windows 7 machine with the same hanging screen.
I have a small three PC home network. Two PC are running Windows 7 and one running Vista.
All three machines have the same homegroup settings. The ability to view machines on the network is very patchy. One machine can see the others, while another machine can only see one other machine. Sometimes machines cannot see any others on the network.
All machines are connected wirelessly with strong signals through a BT 2700HGV Business Hub router. All of the machines can access the Internet without problems.
All machines run Eset Smart Security with the Windows firewall is turned off.
Any advice to create a stable network would be appreciated.
I connect to a remote machine C from Machine B which is connected from Machine A, How can I send ctrl+alt+end to remote machine C ? I cannot access m/c C from m/c A, I need to go through B to access C.
m/c A --> Remote destktop to m/c B --> remote desktop con m/c C.
My computer has recently started to restart its self intermittently without any warning or blue screen.I have updated my nividia driver and now it happens less(every half hour instead of every 5 minutes.
View 2 Replies View Related