.NET Framework 4 Installation Failure

Jun 22, 2011

I have windows 7 ultimate x64 and I have been trying to install microsoft .NET Framework 4. However, every time I try, it always fails. It gets about halfway through the installation and a window pops up asking for me to open the location of an .msi that is not there. It's not in the setup fies and its not in the location that is given.Here is a screen cap of the installation and the window that pops up asking for the .msi file.

View 4 Replies


ADVERTISEMENT

.NET Framework 3.0 Installation Error

Dec 8, 2008

Hmm, anyone know what it means by "Windows features" ?

View 9 Replies View Related

Install .net Framework After Running UN-installation Tool?

Dec 27, 2009

I was having problems with the .net framework, whenever I open a .net application it just crashes, and Microsoft Visual Studio 2008 isn't working too well either.I ran the windows 7 .net framework uninstallation tool, and it said all versions are successfully removed, and now i'm trying to reinstall it, but it's telling me to use the 'turn windows feature on or off' to configure the .net framework.I tried doing that, but the .Net framework wasn't there. I tried opening the installer again, and it says i have to use the 'turn windows features on or off'.

View 1 Replies View Related

OS Re Installation Failure?

Nov 9, 2011

I recently received a virus that did a plethora of things and one of them was trying to delete system 32. To counter this I tried to reset my comp to a previous date. After pushing it to the farthest date and still dealing it I decided to reset to factory default without backing up any files. Everything goes great but when it starts installing the service and the OS it says the installation can not continue and the comp must be restarted. My comp is a HP TouchSmart 600 PC running Windows 7 Premium 64-bit. I have disconnected everything from it and tried running it on safe mode but I do not know how to restart it without pressing the power button but that just ends everything.

View 1 Replies View Related

Windows 7 Installation Failure

Sep 22, 2009

I got the error code 0x80070005 when trying to install Windows 7, the error displayed.Windows cannot install required files. Network problems may be preventing Windows from accessing the file. Make sure the computer is connected to the network and restart the installation. Error code: 0x80070005..I've got a 64 bit Vista running on an Asus G50V Laptop, and I'm trying to upgrade to the 64 bit Professional

View 4 Replies View Related

New Installation Failure Windows 7?

Feb 8, 2011

I have just had a new 1Tb hdd fitted by a shop after my original failed but since he fitted it it keeps crashing ior corrupting Is it possible to reload the Win 7 Home premium to a clean start as I can'tr get it to load

View 3 Replies View Related

Kingston GT 101 G2 Driver Installation Failure?

Mar 26, 2012

When I plug it in, driver installation starts but fails. I can locate the device in the Device Manager, should I be manually installing a driver in this case? If so, I'd like to have a driver.

View 1 Replies View Related

Maya 2013 Installation Failure

Oct 27, 2012

I get this error whenever I try to install Maya 2013 any ideas?

Code: 2012/10/27:01:39:30[private][private]=== Setup started on [private] by [private]===
2012/10/27:01:39:30[private][private]Launch
2012/10/27:01:39:30[private][private]CommandLine/url "http://studentsdownload.autodesk.com/SWDLDDLM/2013/MAYA/WI/Autodesk_Maya_2013_English_Japanese_SimplifiedChinese_Win_en-US_Setup1.exe" /SN 900-34219145 /PK 657E1 /student /skipEULA /akamai /auth /sid

[code]....

View 2 Replies View Related

Code 0x80070017 Installation Failure?

Sep 21, 2012

Can't install Windows 7 from original DVD , I formatted the HDD twice and still, same error. The installation stops after 10-15 min with this error code 0x80070017 I know the media is in great condition, so exclude this problem. Maybe HDD failure ? I did the format and wipe via usb with MiniTool partition wizard .

View 4 Replies View Related

USB Failure During Windows 7 Installation On ASUS P8z68-v Pro

Jan 5, 2012

My new asus p8z68-pro mobo runs everything just fine in the bios -- it detects all the relevant drives, my USB peripherals are working, etc. When I try to install Windows, however, I run into a problem. As soon as the installation files load off of the DVD and the installation begins my USB devices shut down. This means, of course, no keyboard or mouse to proceed with the install, so I'm stuck.I checked in the bios -- both the usb legacy support and the usb 3.0 legacy support are turned on. I have tried this with the EHCI hand-off both on and off. Either way, I run into the same problem. I've even swapped out my fancier mouse and keyboard for simpler models to see if it was some sort of driver issue, but nothing seems to make a difference.

View 2 Replies View Related

Windows 7 Installation Time Show Media Failure

Jan 19, 2012

I installed window 7 that time show massage reboot and select proper boot device and top media failure checked cable

View 2 Replies View Related

Load Installation Disk For Windows 7 - Boot Failure

Jan 19, 2013

I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.

View 1 Replies View Related

Windows 7 Installation Failure On Toshiba Laptop - Run Startup Repair

May 19, 2011

Specs:
Toshiba laptop
Win7 home premium 64-bit
3gb RAM
freshly formatted hard drive
original media from Toshiba with win7

I am trying to completely wipe this laptop off and start fresh. The recovery partition has been removed as part of my search for a resolution for the problem. When I try to install windows 7 on this machine I start by selecting to format the entire hard drive. It completes this and then starts the installation of windows 7. It take a very long time for windows to unpack the files and copy them to disc. After about an hour and a half it starts asking me for the User name/location/time settings, etc.

After that it reboots to startup windows for the first time. It immediately tells me that windows cannot start and startup repair will need to be run or I can select to ignore this and try to start normally. Either option yields no improvement. After working with each of those options I just decided to reformat the drive and start the install again. Even after the drive was wiped and fully formatted I get the same error once the windows installation finishes.

View 4 Replies View Related

Epson Stylus Photo R240 Printer Installation Failure

May 21, 2009

I am unable to get my Epson Stylus Photo R240 installed on Windows7 - has anyone got an answer to this please?

View 1 Replies View Related

Windows 7 Boot Failure, Bootrec Unable To Locate Windows Installation

Jun 15, 2012

Yesterday, I downloaded and installed the latest batch of system updates for Windows 7. When I restarted the computer, however, it stopped at 'Starting Windows' (without the animation), then brought up the startup repair program. As is usually the case, startup repair was unable to automatically identify and repair the problem, so I did it manually, opening the command prompt backing up then attempting to rebuild my BCD. However, the BCD rebuilder was unable to identify a windows filesystem on my hard drive. I tried bootrec /ScanOS, and that wasn't able to find it either. All the data on the hard drive is still present: I confirmed this with an Ubuntu live boot flash drive, so why can't bootrec find the system? After that, I tried /fixMBR and /fixBoot, and while both apparently succeeded, the computer still refuses to boot.

View 2 Replies View Related

Open Device Failure/ Open Driver Handle Failure Gigabyte?

Feb 14, 2012

i'm trying to install at bios and easy tune 6, but for some reason it comes up saying open driver failure, or open driver handle failure. what do i do?

View 2 Replies View Related

Open Device Failure / Open Driver Handle Failure Gigabyte?

Mar 9, 2012

"Open device failure/ open driver handle failure" message when installing gigabyte utilities. The install fails. Does anyone know what might be causing this message?

View 3 Replies View Related

Net Framework 2.0

Nov 13, 2009

Cannot run my Lexmark productivity Studio. When I try to open it I get a notification that I need to download net frame work 2.0. (running windows 7 64 bit) EVERY download Microsoft has for 64 bit net frame work 2.0 will not install. I have uninstalled the Lexmark printer, tried every version of 2.0 and still cannot get the Lexmark Studio to run. When the printer was first installed , the Studio program worked.

The error would pop up , I would clear it and then the program ran. I run the troubleshooter and it says the program is incompatible now. I have tried running it in different compatibility modes with no luck. Tried Lexmark support and so far they have been no help. can any one help me?

View 12 Replies View Related

Why Do I Need NET Framework ?

Dec 13, 2009

I installed windows 7 on my computer. Now, I get this notice that I need to add .NET framework version 2 on my computer. I have tried to download it and I get an error that says not supported by 64 bit operating system??? Do I need it?? What do I do???

View 2 Replies View Related

Microsoft Framework 2.0 Is Only 32 Bit - How To Get The 64 Bit

Jun 22, 2011

Lexmark all in one printer x6650 needs m/s framework 2.0 to run

Productiivity Studio software so I can print photos. Framework 2.0 only <div> comes in 32bit and my w/7 is 64 bit. I have no idea what is going on here

View 1 Replies View Related

Installing .net Framework 4?

Mar 1, 2012

I have some updated software that requires .net Framework 4 to run.I use this on an older laptop that I have not ever used on line. By never going on line, I think this is the greatest virus protection ever. Anyway, to install the Framework 4 from Microsoft, one of the requirements is to be on line, which I do not want to do. Is there any way to install this Microsoft software without hooking up on line?

View 2 Replies View Related

Issue With Net Framework 3.5.1

Nov 28, 2009

When I go to Control Panel - Programs - Turn Windows features on or off, Net Framework 3.5.1 does not have a checkmark. Upon expanding it, I find that

"Windows Communication Foundation HTTP Activation"

"Windows Communication Foundation HTTP non-Activation"

are by default unchecked for me. When I check them, I get the following message:

"An error has occurred. Not all of the features were successfully changed." When I click ok, I says it needs to restart to apply the changes. After restarting and going back to the same places, the above two boxes are still unchecked.

Any information as to why this might be and what can be done to ratify the situation would be most welcome. I need to open a program which requires Net Framework.

View 1 Replies View Related

.Net Framework Issues

Oct 22, 2009

I downloaded and installed windows 7 (i did the upgrade from vista, not a clean instal) upon its release last night, and now when i start the computer up i get an error that says i need the .NET Framework 2.0. I looked through the computer and i have version 3.5.whatever.

This is pretty frustrating.

Additionally, i get an unknown error when i've tried to install windows live, both via windows update and when i dl the .exe from the website. i am not sure if the two are related or not.

I did the student discount if that makes any difference.

View 9 Replies View Related

Net.Framework 3.5 For Win7

Mar 30, 2009

I need a Net.Framework 3.5 because when i install it says Error

i think its because its not for win 7 can some one give me a download because i cant find it.

View 3 Replies View Related

Installing MS .NET Framework?

Jan 16, 2013

Trying to install MS .Net version 4 on desktop PC.Running the 64 bit version of Windows 7.Get the following error msg.:.NET Framework 4 has not been installed because:HRESULT 0xc8000247

View 1 Replies View Related

How To Install .Net Framework 1.1 ?

Nov 2, 2009

I am trying to install DotNet framework 1.1 on my Windows 7 pc its throughing error, Help me please how to install framework 1.1 in Windows 7.

View 3 Replies View Related

.net 3.5 Client Framework

Mar 30, 2011

my boss asked me to download the 3.5 Client Framework. I can only find just the standalone installer for 3.5 (Which errors on us). Im not exactly sure what he is talking about i was wondering if someone could please explain the difference and provide a link(Ive been looking).

View 4 Replies View Related

Requires .net 3.5 Framework

Dec 10, 2009

im trying to run a program that requires .net 3.5, so what i did is i turned on or put a check on microsoft .net 3.5 framework in programs and features. the progress bar immidiately fills up but in the end i get error saying "unable to turn on all features"

any solutions guys?

View 6 Replies View Related

Trouble Updating .NET Framework 4

Jul 24, 2011

For a couple of weeks now, I've had these windows updates that wouldn't finish installing. I've been trying the recommended solutions that I could find but nothing really helps.

I've tried repairing the Microsoft .NET framework but it fails to repair for some unknown reason.

I've uninstalled and reinstalled it both manually and through windows updater, both failed.

View 14 Replies View Related

Net Framework On Build 5956

Dec 8, 2008

it also has .Net framework 2 on it, dont know if its new or not.

View 7 Replies View Related

Looking For Net Framework V4 Service Pack 1

Oct 22, 2012

Installing software at work and it says need NET Framework V4 sp1 before the install will work.I have found sp1 for previous versions of NET Framework, but not for v4.0 on the microsoft.com web site.I specifically seached there for 'NET Framework v4 sp1' and 'NET Framework v4 service pack 1.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved