Install Upgrade, After Final Reboot, No Boot
Nov 26, 2009
I have vista on my first partition, 7rc on the third (second is vista data).
I had read about how you could upgrade from the release candidate and wanted to try it. Everything seemed to go fine, until the very final reboot. (Windows was upgraded to the new version). I saw my regular boot menu again, but then windows restarted the machine one last time, and when it came back up it just sat there, nothing happened forever. And Vista won't boot anymore either - I do not even get a boot menu. Just a blank screen with a flashing cursor, and nothing happening....
I tried the repair options, but windows can't find any of my system restore points (I did set a number of them!) neither vista nor 7. From a command prompt I did try to run bcdedit and it shows that my original boot menu should still be there, but the system is unable to find it. I am completely stumped. Can someone please indicate what to do to get my system to boot?
View 9 Replies
ADVERTISEMENT
Aug 15, 2009
hey, i want to get 7 set on my computer before school starts, so if i download and install the rc, will i be able to upgrade to the final version without doing a clean reinstall of 7?
View 7 Replies
View Related
Apr 24, 2009
I'm currently running Vista x64, and was considering upgrading to the Windows 7 RC.
The only thing that's stopping me is this: Will I be able to upgrade from the RC to a full version of Windows 7, or will I have to do a fresh install?
View 9 Replies
View Related
Jun 19, 2009
Windows 7 64bit build 7100 RC1 runs flawlessly on my PC. Will I be able to update to the final release, or will I have to do a clean installation?
View 4 Replies
View Related
Mar 19, 2011
i was working on w7 ultimate x64 (i had xp 32 before, but due a hardware upgrade i wanted to try an x64 os) when an automatic upgrade from windows poped up(i was pretty sure i disabled the option before, but.. whatever). The thing is the upgrade never completed ( 2 hours freezed on the final step) and i had to reboot(i know, my mistake).from here, i tryed to boot but i did not sucess. the first issue apeared when i turned on the pc, and the boot recovery windows poped up, to check if there waserrors on the HDD. but wont never ever complete (6 or 7 hours running)i started to search on the web for a solution and i found a bunch of similar cases (a failed update and a failed boot recovery) but no clear solutions.never the less, the moest of the cases pointed at the same spot: "the bootmgr file" and i started to try a few steps posted on forums.first of all, i put the w7 dvd instalation and accesed to the console prompt.i followed these steps to delete and reinstall the bootmgr, or at least, that was what the post told me [CODE]well, i am about of exploding or jumping from a roof... seriously, i have some unfinished works to deliver in the begining of the week and i will not succes if ineed to blow up my D: and reinstall.
View 1 Replies
View Related
Nov 8, 2009
I am trying to install windows 7 upgrade from a bootable dvd. I get the prompt to install and then it thinks for a while and comes back with the message:"A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."
I looked around the web and noticed this was a common issue with Vista, but I cannot seem to get it past this point. I have tried pointing it to any and all possible drivers I can think of for the IDE, SATA, motherboard, etc.
Then I decided to just try it from within windows xp, and it worked. I was able to install everything fine. So my question is if it can be installed from the disk like it appears everyone is saying, or if certain hardware requires it to be done from within windows.
I tried copying the driver folder from the system32 folder after 7 had been installed hoping the needed drivers would be in there, but when I browsed to it, it said no device drivers found.
Any suggestions around this? Is it even necessary? I am wanting a system that would be equivalent to formatting the hdd and then installing. Do I get that by installing within XP and then deleting the windows.old folder?
This is a relatively older Dell XPS 400, although everything worked fine once 7 was installed from within xp.
View 5 Replies
View Related
Aug 25, 2009
Well i am currently running Vista Home Premium sp2 and Windows 7 Ultimate (build 7100) in a dual boot config for about 2-3months and loving it. I was wondering if i could upgrade my Windows 7 install to RTM without affecting my Vista install? Do you get a choice which OS you want to upgrade or does it go by what OS you load the upgrade disc from?
View 5 Replies
View Related
Apr 15, 2012
My toshiba c650 laptop recently acquired a virus and now it will not boot. I was running windows 7 home premium 64bit at the time with ubuntu 11.10( I think) my computer crashed while I was running a mcafee scan and has not booted since ubuntu also does not boot due to the windows 7 system failure. Any way I was wondering if I bought a windows professional 64bit upgrade, could I Install it from boot? I also need to know if it would wipe all virus's from the hard drive. It would be best to mention that I have tried safe mode, safe mode with networking, my recovery discs and a blue screen repair discs all that happens when running these is a black screen with white cursor I left them all for an hour to see if anything happens but sadly nothing does.
View 8 Replies
View Related
Feb 13, 2013
Recently my PC's registry became corrupted, leaving me unable to boot. As I really want to keep my files, programs, settings etc I would much prefer to do an Upgrade install than perform a Custom one and wipe everything.
However, the Windows 7 disk insists I boot into Windows before performing the upgrade installation, which is the one thing I cannot do due to my corrupt registry. Compatibility Report is as follows:
Compatibility Report
The computer started using the Windows installation disk. Remove the installation disk and restart the computer so that Windows starts normally. Then, insert the installation disk and restart the upgrade.
This is a frustrating cycle. I can't boot Windows, so I try to perform an Upgrade Install, which I can't do because I have to boot Windows.
Things I've tried:
- Various chkdsk commands, none of which have worked due to my drive seeming to be write protected
- System restore, which I was unable to do as apparently System Protection must be enabled on the drive and I'm unsurehow to do this
- All of the registry repair tools on Hiren's boot CD, all of which are either irrelevant to the problem or have given me error messages
As I have Hiren's CD I can access my hard drive through Explorer, so would it be possible to use Mini XP to attempt the Upgrade Install? If this isn't possible, how else can I repair my registry?
View 4 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
May 24, 2012
I'm trying to install win7 on my SSD, but when i try, i get "Reboot and select proper boot device " message.
View 1 Replies
View Related
May 24, 2012
I;m trying to install Windows 7, but instead of loading the windows disk it just says "reboot and select proper boot device"I already told the BIOS to boot from disk.
View 9 Replies
View Related
Jun 27, 2009
I currently have Vista Ultimate x64 and Windows 7 RC1 x64 running in a dual boot setup. Each OS is installed on a separate disk drive. If I preorder Windows 7 Professional upgrade ($99) will I be able to do a clean install on a partition of my choice or will it force me to clean install over my existing Vista Ultimate partition ?? I understand that I cant do an upgrade in place from Vista Ultimate to Windows 7 Professional. My question is will the preorder Windows 7 upgrade force to me "kill" my Vista Ultimate partition ?
View 1 Replies
View Related
Feb 6, 2011
Current state: I have a Dell with Vista HP 64 that hangs alot Near Future State: I fought this problem on my Dell PC / Windows Vista for sometime now and I'm fed up. I'm going to get a iMac and use boot camp to have both Mac OS (Snow Leopard) and Windows 7. Best of both worlds on superior hardware (my and other's opinion, not my point though).Here's my question: I think I'm going to buy Windows 7 Home Premium 64 bit full installation (not upgrade) and use that to "upgrade" my Dell with Vista. Then when I get the iMac, I will use that same product to do a new installation of Windows 7 on the iMac (and decommission the Dell).Is this the right approach? I don't think Windows 7 upgrade will work for the iMac part of the plan. Is this true? Will I be able to "move" Windows 7 full install from Dell to iMac?
View 1 Replies
View Related
May 6, 2012
I upgraded my computer from an ATI Radeon to a GTX560 and upgraded the RAM from 8 GB to 16 GB. It has been very stable up until this upgrade. It randomly will reboot.Initially I thought the problem was RAM related, so within the last week I exchanged it for a different brand and type (Crucial, recommended for the machine), and while I waited for the new RAM, I reinstalled the stock 8 GB. The rebooting did not stop. The BSOD error is now. DRIVER_IRQL_NOT_LESS_OR_EQUAL whereas with the initial RAM upgrade
View 1 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 1 Replies
View Related
Aug 11, 2011
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3
1 TB Samsung Spinpoint F3 HD103SJ
Intel Core i5 2500K
Corsair 8GB 1600 mhz
Scythe Mugen 2 rev B
GeForce GTX 570
Lian Li Lancool PC-K56
Corsair CX 600W
Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
View 11 Replies
View Related
Nov 20, 2011
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
View 1 Replies
View Related
Jan 24, 2012
My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority:
1st boot Hard Drive
2nd boot cd/dvd/cd-rw drive
3rd boot USB storage
4th boot Diskette drive
5th boot eSATA
6th boot Network
View 7 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 2 Replies
View Related
Apr 11, 2012
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
View 1 Replies
View Related
Jul 19, 2012
i dont have the proper boot device?
View 2 Replies
View Related
Jan 14, 2013
I am receiving an error message on my Gateway One ZX4300-01e. It continues to ask me to: Reboot and select proper boot device or insert Boot Media in selected boot device and press a key.I bought this computer on ebay. it was a seller refurbished item and does not have a boot recovery disk.
View 8 Replies
View Related
Dec 1, 2012
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies
View Related
Oct 25, 2011
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
View 2 Replies
View Related
Nov 24, 2011
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies
View Related
Sep 5, 2011
When it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies
View Related
May 13, 2012
When left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
View 4 Replies
View Related
May 30, 2011
I have a PC with XP Home and wish to upgrade it to Win 7-64. I purchased the Win 7 upgrade version. Will ditch XP when happy with getting programs installed in Win 7.I also have a new drive that I wish to do the install of Win 7.My plan is to hookup new drive, place Win 7 DVD in drive and run the install in Custom mode. This should install Win 7 on new drive and preserve Win XP on the old drive.To register Win 7, I have the serial info from the Win XP system and will insert when asked. I'm concerned about whether this method to register will work correctly as I was told that Win 7 must find a windows.old file on the installation drive. Will it work OK?
View 7 Replies
View Related
Apr 21, 2012
I personally wait for it to be available via updates, or at least the Firefox page. They actually didn't release a version once as it had issues. But, if you must.
View 8 Replies
View Related