First off help and support message, when clicked on would not open because it could not find helpctr.exe file in binaries. I have fixed that and started svc service but now when I click on help and support the hour glass flickers but nothing opens. It is not a registry problem because app paths are correct and svc service is started...Why isnt the center coming up on screen?
View 3 RepliesI tried to access my Help & Support Center link from the startup menu, and the following message comes up:
Windows cannot find 'helpctr.exe. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
I'm working on my Father In Laws' computer, and for some reason, we can't open his Help and Support Center. I have searched everywhere to find the right path to get to it, and no luck. It worked recently, but it's gone now. I have gone through the Services.msc looking for anything that may be disabled that would effect it, but nothing so far.
View 3 Replies View Relatedi've tried every button, tab, link, place, used Search, check my installation disc but can not get Help & Support Center to open up! it's as if it has just disappeared from the system even though it's listed all over. In the Dell Solution Center it looks like this: Help and Support Find answers to your questions, troubleshooting information, and help performing tasks in the Help and Support Center. but won't open! it won't open from the Help tab at top of page!
View 1 Replies View RelatedI've noticed when I access the Help and Support Center - Start/ Help and Support in Windows XP, next to "Did you know?" it says it was last updated on Monday, December 20, 2004. I'm just curious as to what the date is on other XP users system.
View 14 Replies View RelatedI am unable to open the Help and Support Center in XP (Home) I recently installed and ran a registry cleaner.
I am unable to restore to an earlier setting either from system restore or the registry cleaner's back-up I have looked in microsofts KB, articles 888018 & 555329 to no avail. The value data of the following key
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionApp PathsHELPCTR.EXE is C:WINDOWSPCHealthHelpCtrBinariesHelpCtr.exe which appears to be correct I believe the program tries to run but task manager never shows it. I get no error messages at all
Recently I've "discovered" that Help and Support gives me an error when I try to run it.This is the error:
View 2 Replies View RelatedI can't get the Help & Support Center and Search functions to load. In addition Users in Control Panel will not load.
View 8 Replies View Relatedcan't access help and support from start menu or browser and receive error message (windows can not open help and support because a system service is not running. to fix this problem, start the service named "help and support'). i tried using my dimension resourse cd to no end. what am i missing?
View 3 Replies View RelatedI was using Excel and tried to access the help screen, a gray window opened with no content. I had the Office XP installation disk "repair" the installation. there was no change. I tried MSWord. Help screen was same as in Excel - blank. I then tried to access Help and Support Center from the Start Menu. It would not open. I solved the probem by running the restore tool from the System Tools folder and setting the machine back to a time 1 week earlier, but I have no idea what would cause this issue. My machine uses ZoneAlarm Pro, Norton Anti-Virus, Sunbelt CounterSpy and is behind a router so I don't think it was the result of a malicious program.
View 6 Replies View RelatedI have upgraded my dell dimension 2400 from XP Home to XP Pro, when I open XP's Help and Support Center I know it is suppossed to give you links in the DID YOU KNOW? section, but mine won't do that I just get the message saying: "When you are connected to the Internet, this area will display links to timely help and support information. If you want to connect to the Internet now, start the New Connection Wizard and see how to establish a Web connection through an Internet service provider." I have done everything I know but it still won't show the links and I am connected to the internet by an always on DSL connection.
View 9 Replies View Relatedthe Help and Support service wasn't displaying, but I ran a registry fix to correct the problem. Now when I go to Start and click Help and Support Center, nothing happens. I opened up the task manager and what happens is the process "Helpctr.exe" appears, but then it disappears. I have reinstalled Help and Support several times from my Windows disk, but it keeps happening.
View 5 Replies View RelatedWhen I search in Help and Support Center, no results are returned for the Microsoft Knowledge Base. I know this worked in the past (though how long ago, I have no idea). The option to search the Knowledge Base is checked. There are no other system problems to indicate corrupt system files. I've searched the web but haven't found anything yet that seems to apply. I'm reluctant to run a full SFC scan or repair the entire Help and Support feature since all other options appear to be working.
View 6 Replies View RelatedI am unable to start the help and support center, I have viewed the previous posts and tried the solutions, to no avail I have carried out a repair install of Xp from the original cd, but still nothing If I have Task manager open when initialising Help and Suppot the following occurs Helpctr.exe runs, HelpSVC.exe runs then after about 2 seconds Helpctr.exe disappears. Ramesh MS-MVP wrote, run the following commands
helpctr -regserver
regsvr32 itss
regsvr32 hhctrl.ocx
regsvr32 jscript
all were successful apart from helpctr -regserver, which generated nothing.
i am on an XP operating system on a dell. everytime one of the users logs off, we get the window that says "ending program sprtcmd.exe", and then we have to go and end program manually every time we log off. i read a similar post on here where someone was having that problem, and was told it was related to the dell support center, and they were advised to uninstall it. i tried to uninstall the dell support center, and this message pops up: "Error 1306. Another application has exclusive access to the file c:/Documents and settingsBarbLocal SettingsApplication DataSupport SoftDell Support CenterBarbstate logssprtcmd.log.
Please shut down all other applications then click Retry"
It will not let me click retry, i have to close out the little window or hit cancel, then it goes through a little more of the "windows configuring", and then i get a little window for "add or remove programs" that says "fatal error during installation" and then that's that. it won't let me uninstall the program! i know this isn't a major problem or anything, but still having to manually click that window everytime i log off is quite aggrivating.
for whatever search term that i entered within the help and support center, it gets me 0 results just under the ms knowledge base area, even though i have that search option set and i'm conected to the internet. How could this be?
View 14 Replies View RelatedA colleage has experienced a trojan named 'Killreg'. The trojan has been cleaned but there now is a problem with Windows Help and Support (caused by the Trojan or not, I don't know). The Help and Support program runs but the Help and Support service is not running and not present in the Services list. Does anyone know how to initiate this service please.
View 2 Replies View RelatedI recently installed Counter Spy Spyware software on my computer and I am no longer able use the help and support function in windows XP. When you clidk help and support the program freezes up.
View 2 Replies View RelatedSuddenly my documents folder opens when I log on to my machine. I checked all Startup folders for a shortcut to My Documents but found none. I followed the instructions on kb899865 but everything was as it should have been. I then checked for the trojan �spyware.dlder with MalwareBytes Anti Malware and found nothing. Spyware Blaster also found nothing. About the same time I found I was unable to open help and support, when I tried to correct that I continue to get the message that pchdt_w3.cab can not be found. It is not on C or the Windows install disk or SP2 disk. I am really stuck. While it is possible to close the folder after booting it is a pain and I would like to get things operating as they should be. I am running XP Pro. w/sp2.
View 14 Replies View RelatedIts all started when the malware paytime.exe attacked my pc. It turned off my firewall(SP2 Firewall), real-time virus scanner(Trend microoffice client,not using its firewall, provided by my service provider). With the help of hijackthis, spybot and ewido and also the interent , able to delete paytime.exe and its related files.To this I entered in safe mode. Now I am able to control my firewall. Thats the only success BUT when I click nvmixer.exe in my taskbar, it shows visual C++ runtime error and my virus scanner is saying that officescan client has not started. So in control panel I entered in administrative tools and tried manually to start real time scan process but I failed again. It shows cannot start this process in safe mode.
View 1 Replies View RelatedMy printer won't work and when I try to diagnose the situation I get message that says, "Windows cannot open Help and Supprt because a system service is not running. To fix this problem, start the service named 'Help and Support'". How do I do this?
View 4 Replies View Relatedi'm having an issue in Windows XP MCE 2005. the media center application keeps crashing as soon as i open it.
It's been a while now that at windows startup, I always get a pop up from my norton antivirus 2005 saying that the config file is not installed.I have to give several ok in order to close definitively the window.After that, norton works fine.
View 3 Replies View Relatedwhen I click on help and support in start menu I get this message: helpctr.exe - bad image the application or dll crogra~1comma~1office12msoxmlmf.dll is not a valid windows image? it pops up about 3 times, but still manages to load the help files in the enda bit of my history: I have updated to service pack 3 and then the problems started.I got infected with two trojan generic 7 yhe's which my AVG FREE picked up on and virus vaulted, after that my computer went to pot. I scanned many times with: AVG - SPYWARE DOCTOR - MICROSOFT MALICIOUS SOFTWARE DETECTOR - all of which thought everything was fine, until I installed spybot search and destroy which picked up on 8 malware problems and sorted them. I scanned with AVG again and that found 3 problems/viruses to do with microsoft office containing macros which were vaulted.
View 4 Replies View RelatedIt all started when last night the graphics on my computer went haywire and Also I cannot acess the help and support center I get a message that there is a Malicious Script Error: Windows Script Host Shell Object Reg Write helpctr.exe It reconmends to stop script so I say ok and then I still cannot access the help center, so I do it again and the message continues to come up, we started up the computer the other night and my husband had a computer game in the disk drive and we had an error message come up ntldr is missing, we ended fixing that by taking out the game and rebooting and now we have those other 2 above problems not sure if they are related or not. I'm really hoping our graphics card isn't shot.
View 1 Replies View Relatedi am having a couple of problems my help and support will not work say system service not running , i have some copy disks that you have to go to my computer and open the cd drive but all i get when i try to open it there is a key next to it saying safe mode and it will not open.
View 3 Replies View RelatedI was having this problem on my old install of XP, which desperately needed a new install. In any case, I'm now using a freshly installed version of XP, and everything has been running perfectly for about 2 weeks. Suddenly, this one problem reappears: The File Open / Save As dialog box (aka Windows Common Control / comctl32.dll) takes forever to open (20 seconds to 60 seconds). I just did a chkdsk and defrag, and that did not solve the problem. Also, there are no network drives connected which could be slowing things down. This happens in both MS programs (such as Notepad) and 3rd party programs (such as Firefox).
View 3 Replies View RelatedWhy can't I get XP to open every folder using the "Details" option? I do have it set so that it remembers (most of the time) to re-open that folder with the file view it was in when it was closed, but I want XP to open every new and old folder with the "file details" view. Seems like a simple thing, but I can't get XP to understand that's what I want.
View 2 Replies View RelatedTonight I tried opening a chm file and it failed, with that error message. This happens for any chm file I have tried. I don't know when this broke, I know I used to be able to open chm files with no trouble but I can't pinpoint the last time it worked.I've searched around and found some references to this, but no solution -the only relevant MSKB is for Win98. I tried regsvr32 hhctrl.ocx, deleting the hh.dat files, clearing IE's file cache; nothing has helped. I haven't made any significant recent changed to the system that I can think of.
View 14 Replies View RelatedEvery file I try to go to, for instance I tried to go to system restore and it pulls up the open with screen. Everything I try to click on it will ask me which program to use. I can't even get on the internet accurately.
View 6 Replies View RelatedI do not show the Security Center Icon in the Control Panel. I can go to the Security Center by going to All Programs, Accessories, System Tool, route. How can I add Security Center to Control Panel?
View 1 Replies View Related