When starting my computer, I keep getting a "start up repair" window, where my computer is checking for system problems. After it does this for a while, another window pops up says that I can chose to send information to Microsoft or not. No matter what I do from here, every time I start my computer I get the same message, and I cannot access my desktop with it.
View 1 Replies[Using Windows 7 64-bit]. My computer has been working fine for months and out of nowhere I get a BSOD. I think it may be a one time thing so I just let it restart but I get a BSOD again. This keeps happening for 3-4 times. Afterwards I think a system restore might fix the problem. When I went to the startup repair screen, right when I'm about to click the system restore button I get a BSOD again. I think it may be something on my drive so I burn a recovery disk. When it's searching for my Windows installations, I get a BSOD again. All of the recovery methods I know of get blocked by this annoying BSOD.
View 7 Replies View RelatedMy toshiba satellite wont start. goes straight to blank screen with flashing mouse no cursor. on blank screen no error messages wont start from recovery disk
View 7 Replies View Relatedwhen i start laptop it shows a message box that windows loading script "C:windows Microsoft Update.sys"failed How to remove this message permanently without formatting the laptop.OS is windows 7
View 1 Replies View RelatedI've been noticing my system is very slowly lately. I'm also constantly getting "not responding" messages. So far I have tried sfc /scannow, and chkdsk /r . Both came back fine. Suspecting Hard drive problem I downloaded and ran Western Digital's Data Lifeguard Diagnostics (it's a WD drive). That too came back with a clean report. I have run the usual maintenance duties like defrag but still no good. Also checked for malware with Spybot.
View 5 Replies View RelatedI had been having problems previously with this same system getting multiple BSOD everyday with varying messages on them. I was told after it was looked at that I had corruption in my registry and the easiest solution was to just re-install Windows. I went ahead and did that and even after a fresh install i'm still getting BSOD. I tried several re-installs and have been getting the same issues every time. There doesn't seem to be any kind of pattern to it doing it, just happens here and there. It doesn't seem to be the same frequency it used to but it's still happening. The only message i've seen thus far is "Memory_Management". During this last re-install, all I did was install Windows 7 Ultimate x64, loaded the necessary, updated drivers for my graphics card and motherboard and just left it, still got the blue screen.
View 9 Replies View RelatedEver since I bought my new computer and installed Windows 7 64 bit Pro I have noticed that sometimes when I start my computer the startup locks up or crashes, requiring me to restart or it takes me to the system repair screen and running this process does nothing.
View 9 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: AMD Athlon(tm) II P320 Dual-Core Processor, AMD64 Family 16 Model 6 Stepping 3
Processor Count: 2
RAM: 2810 Mb
Graphics Card: ATI Mobility Radeon HD 4200 Series , 256 Mb
Hard Drives: C: Total - 227761 MB, Free - 166604 MB;
Motherboard: TOSHIBA, Portable PC, Base Board Version, None
Antivirus: AntiVir Desktop, Updated: Yes, On-Demand Scanner: Disabled
OS: Windows 7
Browsers: Internet Explorer 9 & Firefox 4.0
I am having printing problems.I get the following error messages: (1) The Printer is offline (2) The printer is in Error state.one or the other pops up for 3 working days.
THis is the problem i keep receiving:[CODE]
View 7 Replies View RelatedI want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
My system suddenly turned off, I turned it back on freeze at start up cant get to F11 to start recovery then goes on black screen. How can I bypass or having my computer running again, ( Did not make a recovery disc).
View 1 Replies View RelatedI have a computer with a corrupt registry to the point where it will not boot. I do not have a good system recovery and the backup registry files in RegBack don't help when I copy them over to system32.
I can't use any of the registry repair tools that I have found because they all require booting into windows to run them and I can't boot windows.I am able to copy the files in RegBack to a flash drive, so I did that.My question is whether there is a tool that I can run on ANOTHER Windows 7 computer that will scan the registry files on the flash drive instead of the files of the computer I am running windows successfully on?
I have a windows 7 home premuim laptop with 4gb ram from compaq (Model Compaq Presario CQ62) i use it mainly for gaming but recently when i trid to install The Elder Scrolls: Oblivion 10th aniversary my computer restarted during the process and i was asked to boot up normally or use start up repair i choose normal then after a while it reset and asked me the same question. i choose startup repair and after 45 minutes
View 1 Replies View RelatedLiving is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies View RelatedEDIT: This is added by moderator. The problem system has been "restored" to factory defaults, so you can skip to post # 11 and be missing only some history. I have also at this time moved the thread from Networking to Windows 7.Okay, this is my boyfriend's laptop. He's left it with me to see if I can fix it. I'm at work right now, and it is at home, so I can't try anything until I get home tonight.Here'e the situation, as best I can tell:He has 2 laptops...one is old, and connects fine, the other is probably 6 months old - a Dell - Windows 7, and this is the one that is having problems. The other laptop has no problem with its connection - it is just the Dell laptop. He brought it over to my house last night, and it is doing the same thing. It finds and connects to my network, but it states that it is a "limited access" connection, which essentially means you have no internet connection (apparently).
So here is what I have found out. For one, his laptop came with few months subscription to McAfee...and apparently that is now expired. He's never renewed it. I did put MalwareBytes on there for him, when he got the thing, but I don't think he runs it unless he thinks there is a problem. I've told him to keep it updated, but I guess he thinks I can fix it if there is a problem. Again... (Once we get this fixed, he WILL keep this stuff current..darn it.) Anyway...he said he kept getting some popups - the ones that ask if you want to "allow a program to make a change to your computer"...and he always said no. I think he got several of those in one night. He ran the MalwareBytes, and it found and quarantined some malware (I don't know what sort of things - I was not there when he ran it) and then when he tried to access his network again, he got the "limited access" thing. So...something has happened, just on that laptop. I messed around with it a little last night, but I couldn't get anything working.
I want to switch my graphic (I have dual graphic one is intel and one is ATI mobility Radeon), I click okay to switch to power saving graphic intel, and so the screen blacks out. It never respond after black out, I made hard restart and screen freeze at the win 7 icon. No lucky, I hard press again and start up to ask me if I want to scan for my previous startup problem, I did and it tried fixing the problem til next morning. No luck, give me a choice of to do a HP recovery or system recovery, some how I must have accidentally click on HP recovery and preceded to click through all the warnings, til it was at 1% then I realized that it was going to delete all my DATA!Well, I was still very sleepy when I decided to terminate that recovery...by power shut down.So power up: "BOOTMGR is Missing Press Crtl-Alt-Del to restart"I went through F11 system recovery to try and see if I can still recover, but no luck, later i tried some steps in cmd window:
bootrec/fixmbr
bootrec/fixboot
bootrec/rebuildbcd
bootrec/scanos
got error says I have zero OS installed!
Bcdboot c:windows also give me failure when attempting to copy boot files I restarted, try and try again, but now it won't even let me into system recovery says "BOOTMGR is missing" now I can't even access my command to try some recovery without totally deleting my files.... I tried burning a win7 ultimate iso to a DVD and try boot from there but it says no OS system found.My computer is HP touchsmart with switchable graphic, HP has a recovery partition that can restore my computer but I don't know how to access it now. Can't get pass the screen of BOOTMGR is missing...I learn my lesson don't touch computer til im fully sober. I may have done the DVD bootable wrong. And now I NEED EXPERT HELP! MY NOVICE SKILL HAS TAKEN ME NO WHERE, PLEASE EXPERTS REPLY WITH INSTRUCTIONS..........
My original system is win 7 home premium 64x, but all I have at my disposal is a copy of win 7 ultimate 64x.Some specs of my computer: HP touchsmart with switchable graphic, intel i5 and ATI mobility Only has one OS: Windows 7 Home premium 64x Has HP recovery partition, and 300GB of other space.have this InsydeH20 Setup Utility Rev. 3.5 and currently all I can do is do some random scans.. Primary hard disk self test, and then memory test, I don't expect to see any problems since I have this done with in the HP system recovery environment.
I have a pc that is setup with a 60 gb SSD for Windows and a 2TB RAID 0 for the rest of the stuff. Last night I decided to partition some of the RAID to install Windows 8 Consumer Preview and see what the fuss was about.I partitioned it just fine, and everything was going smoothly, until I decided to use the windows tool to make my pendrive bootable with the Win8 ISO.In the middle of the process, I was doing something else (unistalling firefox to be more exact) and suddenly a blue screen comes up!Now my PC is stuck on the famous startup recovery loop, and I cant find a way to make it boot.
- Manual CHKDSK
- That tutorial on this forum where you mess around with the prompt wnidow
- restarting 1 billion times
- booting up from the windows DVD and trying to repair the hard drive
And as you can imagine nothing happened and I am still stuck with my har drive being unbootable.Now I cant help thinking that this was due to my pen drive being in the middle of that process in some way, but I have since removed it, burned it and buried in a forest, and still my problem persists.Since I havent found another solution online, I think now that the only way for me to get my PC back running is by reformatting my SSD (while hopefully keeping all my RAID files intact) and reinstalling windows. BBUUUTT!!! I have 100s of hours worth of Skyrim in that drive, and if I loose that I will seriously freak out! While I dont play it a lot anymore, when the expansions come, Dovahkin will rise again!Can I copy my files from my messed up SSD to somewhere else, before formatting it and starting a new life?
How to Automatically Create A System Restore Point at Startup ?
View 0 Replies View RelatedI am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
View 2 Replies View RelatedI decided to do a system recovery for my laptop. I've already done a couple of experiments before and from what I remember the first time I done a system recovery, the partition where my personal files where saved did not get deleted.The only thing that was "system recovered" was the partition where the OS was located. Yesterday, I again decided to do a recovery but this time, the partition where I have my files got deleted and the space it had "returned" to the OS partition. Orignally, I shrunk the OS partition so that I can have space for my partition for my personal files.If it helps, I've done a "system recovery" but saw one of it has a "mini system recovery" option. What is the difference?
View 1 Replies View RelatedI am in the process of restoring everything to our laptop after doing a Recovery. How to make this process simpler? Right now Windows Update is installing 103 updates. I have downloaded virus protection. Any other "must have" or "must do" things I should be aware of?
View 6 Replies View RelatedMy Windows 7 x64 desktop box developed a problem this morning with the ACLS file that Windows diagnostics could not fix. After several attempts, I decided to do a non-destructive re-set via the recovery management software included with the box (eMachines 1331, which came with no disks, only recovery partition).
The process seemed to go smoothly, but the Restore Progress screen has been sitting at 'Please wait a moment...' for well over an hour now and I'm puzzled. Shouldn't there be some sort of progress bar indicating how long remaining in the process, or is it meant to just sit on the 'Please wait a moment...' with the trailing dots cycling from 1 to 5 dots as it is doing?
The drive is 683 gigs usable, with about 50% in use for files and programs.
Today i tried to use Windows Anytime Upgrade but after checkingmy code it said that i need to turn on system recoveryi go to:computer>properties>system protectionand then i get an error saying run system recovery again (0X81000203)then were it says available disks it says searching forever...this is really annoying not only because i cant use Anytime Upgradebut also because system recovery is very good if my systemhas tons of crashes and other problems
View 4 Replies View RelatedI am attempting to transfer my system from my 250gb hdd to a new 3tb hddand am having trouble. I have created a system image on my usb external drive.I then created a system repair disc (cd-rom). I rebooted my system, went intothe BIOS and put the cd-rom drive as the primary boot device and put the new 3tb drive as the primary drive. I have even deleted the 250gb drive in thelist of drives because of some info I read trying to solve my problem. When theboot completes I get a System recovery options windows requesting keyboardcountry - US and click next. Then get a System Recovery Options window witha message "This version of System Recovery Options is not compatible with theversion of windows you are trying to repair. Try using a recovery disc that is
View 9 Replies View RelatedFirst off, I'd like to point out that I'm kind computer literate and some technical things you guys may say may be over my head. That being said, here's what happened.I booted up our Sony Viao running Windows 7 and a window popped up talking about system recovery. At the time I didn't even know what that meant, so I was like "what's this BS" and exited out of the window. Then the computer went into system recovery mode. I just thought it was doing an update of some sort, so I walked away and let it do it's thing. I at the time didn't know that while I was watching tv, our computer was erasing all of our data. When I came back, it was finished and said "restoring to factory settings". Then it set-up for first time use, pick a password, ect. Loosing our important documents is one thing, but we're super bummed we lost all of pictures of our daughters first year and a half of life. I know it's our fault for not backing up our files and we will from now on.So my question is, is there a possibility that the data wasn't wiped completely off the hard drive? Could the data just have been moved to another part of the hard drive and not be erased until that space is needed? I've tried booting up in "safe mode", but that didn
View 6 Replies View RelatedHow can I do a system recovery without a disc ?In my drive D , there is something called " recovery " I guess it is a partition .But when I open up recovery manager , It asked me to insert a disc .
View 5 Replies View RelatedMy HP Pavilion DV7 laptop will not do a system recovery after I hit F11 when I boot the PC.The recovery drive on my computer says it's just about full.It's running windows 7 64-bit
View 9 Replies View RelatedHow to Boot to the System Recovery Options in Windows 7 ?
View 0 Replies View RelatedHow to Do a System Image Recovery in Windows 7 ?
View 0 Replies View RelatedMy hp laptop froze while i was performing system recovery. I got as far as backing up my existing files...8 dvd's worth. I restarted a few times and then froze on a grey screen with my cursor flashing in the upper left hand corner...I tried using my system recovery dvd that I made but still nothing.
View 3 Replies View RelatedJust picked up my first Win7 computer, and it came with no discs. No surprise there, but I'd like to make some recovery discs, but not the kind that Windows says you can make. I don't want access to tools for recovery, I want access to a physical install of the OS and the drivers.
Like the discs enterprise people get when they buy their machines. I must be googling wrong, because all I'm finding are results that teach me how to create a recovery tools disc, which isn't quite what I'm looking for.