I have a weird issue with my wireless adapters. I will put my computer to sleep and then resume my work a few hours later, when the computer wakes up both wireless adapters are disabled and I have to go into adapter settings to re-enable them. My adapters are a netgear wna1100 usb adapter and an azio pci card adapter.
View 1 RepliesI'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).
Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.
The only solution is to shut down the system manually and boot it up again.
I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
View 2 Replies View Relatedi am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
View 4 Replies View RelatedWin 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.
View 4 Replies View RelatedI have a Lenovo ThinkPad T400 running a fresh install of Win7 Pro x64 with SP1. I did the clean install as normal, getting necessary drivers from Lenovo and leaving the rest to Windows. In the past this has worked well.
This time I am having an issue where resuming from sleep or hibernate takes longer than starting the system from shutdown. Looking at the event logs it seems to be driver related. I open the lid, press the power button, and I get nothing other than a power light, no HDD access light as usual. This usually takes quite a while. Once I get to the logon screen, it is unresponsive to both password and fingerprint reader. It sits like that for a while and than after logging on everything works fine.
The machine has ran Norton Internet Security 2012 from day 1 and I have no reason to believe that this is malware related.
I have saved the "Diagnostics-Performance" section of event viewer an EVTX file which should be attached to this post. It will open in event viewer.
EDIT: It says I am not permitted to upload this kind of file? I have uploaded it to MS SkyDrive instead. [URL]
Lenovo ThinkPad T400
Win7 Pro x64 SP1
Intel C2D T9400
8GB RAM
Crucial M4 64GB SSD
500GB Secondary HDD
14" WXGA+ 1440x900
Switchable Intel/ATI Graphics (ATI disabled)
Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.
View 2 Replies View RelatedMy laptop (Dell Vostro V13) is stuck in some kind of limbo. It went into sleep mode and won't wake up fully! It "resumes" the boot-up sequence right up until the four windows colors do their characteristic swirl animation - then the screen goes black.I can't seem to force a fresh restart b/c every time I power off and back on, the laptop tries to *resume* and gets stuck again.Hitting F2 and F12 allows me to run bios and memory tests, but to no avail. The laptop always attempts a resume.How do I break this sleep-resume cycle and do a fresh restart? Reinstalling the OS is out of the question (too many important files will be erased
View 5 Replies View RelatedAlthough I found some issues that are almost similar, nothing seems to really solves the issue I have.
Build 7068, x64 freezes after a resume from sleep (S3). The desktop image is visible but the system totally hangs. Only a hard power down works.
I use two USB devices (keyboard and remote) and both can resume the system from sleep. Strangly the system did work for the first day and now even a clean install fails on resume...?
Vista x86, had no issues at all, rock solid operation for almost a year.
System config:
Gigabyte EP45ds4 (BIOS P9), E8400, ATI HD2600pro (this card only works with driver 8.12 in Vista SP2 compatibility mode to enable svideo output), HVR2200.
Having problems with my Windows 7 PC which is periodically slow to resume from sleep.System Specs is up to date, note op system is on 128GB Sandisk SSD.
View 9 Replies View RelatedI am having some issues with Windows and resuming from sleep. I have an overclock of 4.2 GHz and everything works great, but after I resume windows from sleep, the clock drops to normal Turbo Boost Ratios ranging from 3.4 to 3.8. Naturally after a restart the clock goes back to 4.2 as if nothing ever happened.
Note: I have tried Disabling various power functions in the BIOS such as EIST, C1E, etc.
Specs:
Gigabye Z77X-UD5H
i7-2600K @ 4.2GHz
G.SKILL Ripjaws DDR3 2133 16GB
Sapphire 6950 2gb Dirt 3 Edition
Creative X-Fi Titanium
Crucial m4 128GB Rev.000F
600 GB Velociraptor
3 x Other Storage HDDs
Thermaltake Toughpower 850W
I am using windows 7 ultimate and facing great problem. Whenever I put my PC to sleep, on resuming it crashes giving a blue screen of death message. I am never able to put my PC on sleep which quite inconvenient. Actually my video card does not support windows 7 aero or there are no WDDM drivers available for my card which is ATI RADEON 9250. I am ready to upload any crash minidump files or any other log files. Also tell me if any WDDM drivers are there for my video card as I am not able to get them anywhere. Is this video card the only reason for the problem
View 2 Replies View RelatedHave a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.
View 1 Replies View RelatedI'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
View 8 Replies View RelatedWill the computer automatically resume from sleep when Run backup on a schedule is set at a time when the computer is sleeping or do we have to tweak the task scheduler?
View 1 Replies View RelatedI installed Windows 7 x64 on my HTPC and have found that after resuming from S3 sleep, my media drive (1TB WD 10EACS) is missing. The drive is not seen in Disk Management and is not discovered when I scan for new hardware. The only way to get the hard drive back is to reboot. Power and data cables are secure. This exact build did not have this issue when running Vista. Win7 is the only change. If I enter S3 and then immediately wake the system the HDD is still there. The problem seems to occur when the HTPC is in standby for a longer period. like overnight.
This is on a GA-MA69GM-S2H motherboard with the SB600 SATA controller running the latest drivers in AHCI mode. I switched to IDE mode and the problem has not occurred for two days. (/crosses fingers)
This is a critical flaw for HTPC use since S3 sleep is a must. My HTPC missed several TV recordings because when it woke up my media drive was gone and I'd like to prevent this from happening again. (This really reduces the WAF!)
I posted on the TechNet forum with others having the same problem here: HDD not waking from sleep Windows 7 RTM?
I thought I'd open the topic for discussion here at Tom's since the forum here is more robust. Anyone else observing this behavior in Windows 7? Does anyone know of a fix for AHCI mode?
I have Win7 on my desktop PC, and sometimes when I start up the computer, it won't have any internet access. On more rare occasions, it will do the same thing when I resume from Sleep. Windows usually solves the problem by itself, but it that takes about a minute or so.
I know it's not the modem or the router, becuz other computers on my wi-fi network can access the internet even when the main PC can't. I did a search and found a few things about reinstalling Office 2010 or disabling IPv6, but that doesn't work for some people. Those posts are also 3-4yrs old, so it seems like there should have been patches
i have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
1 The following boot-start or system-start driver(s) failed to load: cdrom
2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA
3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.
4 Audit events have been dropped by the transport. 0
5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP
6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER
7 The previous system shutdown at 07:28:23 on 09/03/2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:
- changing Power options, restored "defaults", changed hybrid sleep on/off
- BIOS is useless as there's no power management options, is a netbook.
- roll back / reinstalled Nvidia video drivers
- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...
I am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
View 1 Replies View RelatedOccasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
View 2 Replies View RelatedThe Power Configuration will not let me change the value. The field, which is set to 'Never', is greyed out. There is a warning that basically tells me to check the Group Policy settings. Note 1: I can change all other power configuration options apart from this one Note 2: This happens on all 4 Windows 7 machines in my network (private home) Note 3:I run SBS 2003 and have a domain. I am pretty sure that there is no Group Policy that can be set to prevent a user from changing the sleep valueI have looked and none of the policies are even close. All polices that have anything to do with power configuration are undefined. Note 4: I have checked the group policy settings on the computers and no, I can't find a policy that would prevent anyone from changing the sleep timer. Note 5: Yes, of course I have admin rights on the computer.
View 2 Replies View RelatedI downloaded the RC over the summer to try it out, alongside linux mint. I like it so much that I've decided to abandon the linux distro for now and let Windows 7 take over my whole hard drive. The one thing remaining before falling in love is the lack of standby mode. The sleep function is grayed out in the start menu, so I can't even put it to sleep. This is annoying because I'm using a laptop at school, which I would like to put on standby (instead of hibernating) between classes. This is a 100% fresh install. It was the first thing I tried once the install finished, because I had trouble with the previous Windows 7 install.
View 9 Replies View Related2 days ago my Windows 7 sleep option suddenly disabled, tried to update to the newest video card driver but still couldn't fix it.
View 4 Replies View Related7 x64 goes in/out of Sleep Mode successfully, but Aero Peek's visual effects disable approx. 2 sec. after the system wakes. If I log out/on the effects are still disabled; I have to reboot to establish.
Phenom 9850 x4 2.5 GHz
GeForce 9600 GS
* I also have issue with right-clicking and Explorer crashing, however mine only occurs when I right-click on the Recycle Bin, and only after my computer has been running for awhile and I am recycling multiple files.
When I turn on my laptop the wireless connection is disabled. I have to go through the trouble shoot function to enable the wireless connection. When I turn the laptop off, the wireless connection becomes disabled.
View 1 Replies View RelatedSo, a long time ago i had wireless, but after a while it stopped working that well so i switched to a Ethernet cable. I couldn't connect to it because it wouldn't show up so i disabled the wireless and then it connected.Now back to reality..We now have fibre-optic so it's a lot faster so i tried to get my wireless signal back. Can't find it in the network and sharing centre, checked device manager as well. Have tried taking the Ethernet out to see if it would pop up but it hasn't.
View 2 Replies View RelatedWindows 7 home premium. SP1
Asus K52JT laptop
AMD Radeon 6370M with HD audio
Atheron AR9285 Wirelss adapter
At my wit's end on this one. After a system crash a couple of days ago I found that my audio and wireless were disabled. Tried to restart the services but got error 1053 with wireless and error 1068 with windows audio. Have done the following: Checked for any virus malware: Macafee AV, Malwarebytes, Spysweeper and Sptbot. Nothing found.Tried starting in services on many occasions. Same issue.Installed up to date drivers. Rolled back drivers to original versions. Same problem.Ran troubleshooter in windows 7. Received notices that the services were stopped but could not be fixed.Ran windows fixes from Microsoft site with the same result as W7 troubleshooter.Downloaded copies of dll files and replaced them in win/system 32. Same problem.Ran sfc /scannow found no issues. I have my ASUS backup disk(s) so I can install the OS again but I don't want to lose the software I have already installed.
I have a Dell E5520 running Windows 7 Pro 64-bit (as installed by Dell). When I boot the computer, The wireless card tries to connect to the network, but times out. WHen I check the card's status, it shows as "disabled". I change it to "enabled" and it works jst fine until the next boot (warm or cold).
View 4 Replies View Relatedrecently I used a software AVG PC Tuneup and it has never been a problem for me until a couple of days ago when I decided to install it on my DELL. Now, I went to system advisory and did a system scan on recommended settings, I pressed 'fix selected' and my Wifi was disabled, I tried everything. I can't get my wifi to work without plugging in my modem directly ot my pc. I noticed my wifi radio was disabled, so I pressed the F2 button but nothing worked. I am trying to re enable my wifi radio / wireless radio connection button but it won't work.
My program intel my wifi utility tells me my wifi is disabled but I can't enable it.
System information
Manufacturer: Dell
PC Model: Inspiron N5010
System Type: 64-bit
Windows 7 Professional
Screen Caps
I have been having a problem with my USB wireless network receiver, netgear dualband wireless, the problem appears when I've had the computer in sleep. When I wake it back up, it will fail to install and I need to either take it in or out, or restart the computer.
View 1 Replies View RelatedI just got a new HP desktop, and a wireless router to put into the USB port. It worked perfectly after initial install with the drivers, but after coming back from sleep, it does not see the adapter, and I have to re install the drivers to get it to work. If I shut down the system, then turn it back on, the adapter works perfectly.
View 6 Replies View Related