Netbook Can't Resume From Sleep BUT Works Fine From Hybernation

Mar 9, 2012

i have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

1 The following boot-start or system-start driver(s) failed to load: cdrom

2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA

3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.

4 Audit events have been dropped by the transport. 0

5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP

6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER

7 The previous system shutdown at 07:28:23 on ‎09/‎03/‎2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:

- changing Power options, restored "defaults", changed hybrid sleep on/off

- BIOS is useless as there's no power management options, is a netbook.

- roll back / reinstalled Nvidia video drivers

- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...

View 2 Replies


ADVERTISEMENT

HP Laptop Sleep / Hybernation Settings

May 23, 2011

My HP laptop shows a blank screen after loa=eaving the computer for a short time. I have tried changing settings for hybernation and sleep, as I don't know which it is, but when I click the mouse to bring it back, it shows the computer as "locked". It take quite a while to bring the screen back. I have changed the settings to "never" as it is usually on mains electricity.I don't know what happens, but it takes whatever I was working off screen and comes up with the options to "change user" but we only have one account and says it is "locked".

View 4 Replies View Related

Screen Does Not Resume On Resume From Sleep?

Oct 17, 2012

I'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).

Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.

The only solution is to shut down the system manually and boot it up again.

View 1 Replies View Related

Slow Resume From Sleep If Sleep For Long Time

Apr 21, 2011

I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.

View 2 Replies View Related

PDF Won't Open In IE8 But Works Fine In IE9

Apr 24, 2012

I have a number of users that I support that cannot open a PDF file downloaded from a training website (external website, not intranet). Using IE8 they get a flash of status bar activity and then nothing. On my computer with IE9 I have no issues opening them at all. I've changed all the security, privacy, content and advanced settings to match what I see in my internet options, but that hasn't helped.

I can't figure out what has changed between IE8 and IE9 that causes this. Adobe Reader 9 is installed on all machines. Firefox 10.0.2 will open the files also, but has issues with some of our propriety software so we can't use it as a workaround unfortunately.

View 8 Replies View Related

Pc Works Just Fine Until Go Into Facebook Games?

Aug 12, 2012

pc works just fine until i go into Facebook games. The screen then fades and freezes. This is with all games.

View 3 Replies View Related

IE8 Cannot Display Webpage But Then Works Just Fine

May 23, 2011

I have been having an issue on several computers lately where IE8 will not display a webpage. As soon as I close the troubleshooter the page loads right up. This has happened on new computers and old. I just installed windows 7 professional on a brand new computer and IE8 is having the same exact problems. What does this mean?

View 12 Replies View Related

Windows 7 Internet Not Working / OS X Works Fine Though

Feb 9, 2011

I have a mid 2010 iMac 27" 3.2Ghz i3 4GB ram 1TB hard drive space ATI HD4870.Running windows 7 x64 and OS X 10.6.6..I am using a wireless internet source from nearby, and the connection works great on OS X when I boot into windows the internet is completely un-responisive and when it does work its slower then glass (for those of you who don't know glass is technically a liquid)

View 5 Replies View Related

Network Not Connected - Internet Works Fine

Oct 9, 2011

My computer is on the internet, which is working fine - except that if I go to the Network and Sharing Center, it says that I am not connected to a network. The major problem this is causing is the fact that I can't use Windows Media Center to stream anything over to my Xbox, because it says that I'm not connected to a network: Running the troubleshooter does nothing.So far I've: Uninstalled drivers, and reinstalled from my Motherboard's disc which was working fine inititallyUninstalled Apple's Bonjour applicationDisabled and re-enabled the network adapter multiple timesRan ROUTE DELETE 0.0.0.0 for the hell of it because I read that somewhereNothing has worked.

View 9 Replies View Related

ATI Card Works Fine In Win 7 Ult RC, Not In Win7 Prof

Oct 28, 2009

I've been using the Windows 7 Ultimate release candidate as an evaluation copy for a while now with no problems. I have an ATI radeon mobility X1600 graphics card in my laptop and I'm using an external monitor through my laptop's DVI port. I bought a product key for Windows 7 professional and therefore had to reinstall that version because I'm using Ultimate as the evaluation copy. I have each version on its own partition so I can switch back and forth between the two.

The problem is that the newly installed windows professional copy will not recognize my ATI graphics card and I can't use my external monitor. It has the standard windows VGA adapter drivers installed. I've installed and run the ATI file i downloaded off their site, '9-9_beta_win7_32_dd_CC', and this accomplishes nothing. I looked in device manager on the working ultimate version and the card is installed correctly so I copied all of the drivers and files it says its using and then tried to update the driver for the standard windows VGA adapter and it says it can't find any better drivers than the current ones.

I remember initially having this same problem when I first installed the Windows 7 Ultimate RC several months ago but I have no clue how I was able to get it to work... Any ideas?

View 1 Replies View Related

Can't Print To Pdf From Ie8 But Works Fine From Ms Office Programs

Mar 13, 2011

All of a sudden, I can no longer print to pdf from IE8 (windows 7), the windows flashes for two seconds as though it were starting and then nothing happens, no pdf is created, etc. I've thought about reinstalling Acrobat but am afraid it will also start to fail from MS office.

View 2 Replies View Related

Windows 7 Will Not Complete Install On SSD - Works Fine On HDD

Mar 6, 2012

New gaming PC project:
Asus Rampage Extreme IV
I7 3960x
32gb Gskill 2133 mhz
Sound Blaster Recon 3D
2 Corsair Force GT 60gb sata3
2 Corsair Force GT 120gb sata3
Windows 7 home 64bit w/anytime upgrade to Professional (Didn't know about the 16gb ram cap...)
9800 GTX video (ran outta money...)

The issue I'm having is everything seems fine till the first reboot, then I get errors about some random important file is missing or corrupt, please insert your DVD and repair windows or whatever the hell it says. The specified missing file is always different each install attempt (I have made about 30ish attemps so far in every drive configuration I could think of). Once it even said 'a system file' is missing or corrupt with no file specified. One attempt (120gb drives in raid0 with no other drives attached) did make it to the Windows 7 load screen, but then windows encountered an 'unknown error' and had to close while finalizing.

What I wanted to do was raid0 the 60's for boot and raid0 the 120's for games, but I can't do that because while this mb has 4 sata3 ports, only 2 ports are raid capable (Intel C600 controller) as the other 2 are on an ASMedia controller. As that is the least of my problems and only my fault for making assumptions before I buy crap, what I thought to do instead was install win on one 60 on the ASMedia sata3 controller in AHCI with OPROM enabled, use the other 60 for task file, and raid0 the 120's for game installs. At first I thought the problem was bad drives because it installs fine on my old HDDs, but all 4 drives DOA seems unlikely so I figure I'm doing something wrong.

There are multiple posts about issues with these drives on Corsair forums, however none of their solutions provide a fix. Currently I have Windows 7 installed on 2 seagate 160gb HDD's in raid0 on sata2 with both 60's on sata3 ASMedia and both 120's in raid0 on sata3 Intel C600 controller. I am convinced there is no problem with any drive as I have multiple games installed on the raid0 with task file on 1 60 and the other 60 is dedicated to ready boost. Honestly I have no idea what ready boost does, and with 32gb of ram it probably doesnt do much - but I can't think of anything else to do with the drive to see if I get any system hangs or issues.

After a week in this configuration I have had no issues whatsoever. I have run error checking from the properties tab in win for all drives, as well as chkdsk from command prompt and the disk checking utility in partedmagic which all came back no problems found. ATTO benchmark shows the the 60's around 475mb/s read/write and the 120's in raid0 are about 1100mb/s read/write. These SSD's are lightning fast. My HDD's are not - 275mb/s read/write in raid0 . Must needs faster boot.

I have tried installing win on each drive individually on each controller twice (16 attempts) and tried each set in raid0 a few times. Every attempt started out with a partition deletion and a secure erase using partedmagic AND sata3 controller in AHCI mode per Corsair forums. I have done Corsair's 1.3.3 firmware update to each drive. I have tried letting windows partition/format each drive during the install. I tried booting from my HDD's, then creating partition tables, allocating sapce, and formatting the SSD's from disk management, then installing win on the drives already setup. And a few other various things in different orders.

My steps for the 1 result that yeilded and actual Windows 7 loading screen after 1st reboot:
- 2 120gb ssd's on Intel C600 sata3
- Enter bios - change sata from raid to ahci - exit
-Boot with partedmagic bootdisk - deleted partitions both drives - system suspend for drive reset - secure erase both drives - shutdown
- Plugged in 2 160gb hdd to sata2
- Enter bios - change sata from ahci to raid - exit
- Enter raid setup utility - create raid0 on 120gb ssd's with 32kb strip - exit
- Boot win from hdd - create MBR partition table, allocate all avail space, format NTFS (not quick format) - shutdown
- Unplugged 2 160gb hdd
- Boot from Windows 7 install disk - install to SSD raid volume - 1st reboot yeilds load screen then 'unknown error', but I guess it was some-what better than windows failed to start due to whatever random file missing or corrupt.

View 4 Replies View Related

Cannot Connect To Any Website, But Internet Works Fine?

Jul 10, 2012

I recently ran into a problem. I cannot access any website through any browsers (Internet Explorer 64-bit works fine). In Google Chrome I get this:Error 137 (net::ERR_NAME_RESOLUTION_FAILED): Unknown errorAll my other Internet-reliant programs (Steam, XFire, SKype, etc.) work fine, with the exception of MBAM (can't connect in order to update definitions).I've ran TDSS Killer (found nothing), MBAM (found a few things, removed all), and Microsoft Security Scanner (found a few things, removed all).

View 11 Replies View Related

Won't Sleep From Start Menu But Sleep Timer Works?

Apr 1, 2012

I know there are a bunch of sleep problems out there but I couldn't fine one similar to this after doing a forum search. Running Windows 7 Ultimate. Sleep used to work ok but now when I choose sleep from the start menu, the screen blacks out but the computer doesn't actually go to sleep. The fans, activity lights, hdd lights are all still running. If I move the mouse the screen comes back. However, if I just wait for the sleep timer to kick in then the computer does go to sleep (all fans stop running and all lights go out). I'm not sure what caused this. I use my pc as an HTCP and now when I push the power button on the remote the pc does not go to sleep.

View 9 Replies View Related

Why Laptop Works Fine Using Ubuntu Live Cd But Not With Windows 7

Nov 28, 2012

When using the installed windows 7 my laptop keeps crashing no matter what web browser I'm using, what antivirus I use etc. The 'not responding' thing always bugging me plus occasional BSoD and regular freezes. I tried clean installing using windows CD but that didn't solve my issue.

View 1 Replies View Related

Secondary HDD Works Fine But Cannot Be Disk Cleanup Or Defrag?

Jul 2, 2011

I have a two HDD setup with a newer Western Digital Caviar Black 500GB as my secondary drive. It stores all my bigger files such as video games, videos, and so on. Whenever I try to optimize that hard drive using Disk Cleanup or Disk Defragmenter, it doesn't seem to execute the program. The hard drive is running and DC and DD have it on their list but when I use DC it would just come up with 0 mb to clean every time and DD always run a lot faster than the smaller primary drive which is also Western Digital. Is there somewhere in Windows 7 configuration that I need to change to enable the disk to be optimized?

View 4 Replies View Related

Sleep Mode Resume Bsod

Jan 10, 2012

i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.

View 4 Replies View Related

Windows 7 Freezes On Resume From Sleep?

Jan 13, 2013

Win 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.

View 4 Replies View Related

Slow Resume From Sleep/Hibernate

Jun 30, 2012

I have a Lenovo ThinkPad T400 running a fresh install of Win7 Pro x64 with SP1. I did the clean install as normal, getting necessary drivers from Lenovo and leaving the rest to Windows. In the past this has worked well.

This time I am having an issue where resuming from sleep or hibernate takes longer than starting the system from shutdown. Looking at the event logs it seems to be driver related. I open the lid, press the power button, and I get nothing other than a power light, no HDD access light as usual. This usually takes quite a while. Once I get to the logon screen, it is unresponsive to both password and fingerprint reader. It sits like that for a while and than after logging on everything works fine.

The machine has ran Norton Internet Security 2012 from day 1 and I have no reason to believe that this is malware related.

I have saved the "Diagnostics-Performance" section of event viewer an EVTX file which should be attached to this post. It will open in event viewer.

EDIT: It says I am not permitted to upload this kind of file? I have uploaded it to MS SkyDrive instead. [URL]

Lenovo ThinkPad T400
Win7 Pro x64 SP1
Intel C2D T9400
8GB RAM
Crucial M4 64GB SSD
500GB Secondary HDD
14" WXGA+ 1440x900
Switchable Intel/ATI Graphics (ATI disabled)

View 6 Replies View Related

Windows 7 Does Not Resume Correctly After Sleep

Feb 6, 2011

Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.

View 2 Replies View Related

Windows 7 Won't Resume From Sleep; Restart Not Available?

Apr 25, 2011

My laptop (Dell Vostro V13) is stuck in some kind of limbo. It went into sleep mode and won't wake up fully! It "resumes" the boot-up sequence right up until the four windows colors do their characteristic swirl animation - then the screen goes black.I can't seem to force a fresh restart b/c every time I power off and back on, the laptop tries to *resume* and gets stuck again.Hitting F2 and F12 allows me to run bios and memory tests, but to no avail. The laptop always attempts a resume.How do I break this sleep-resume cycle and do a fresh restart? Reinstalling the OS is out of the question (too many important files will be erased

View 5 Replies View Related

7068, X64: Resume From Sleep Freezes W7

Apr 6, 2009

Although I found some issues that are almost similar, nothing seems to really solves the issue I have.

Build 7068, x64 freezes after a resume from sleep (S3). The desktop image is visible but the system totally hangs. Only a hard power down works.

I use two USB devices (keyboard and remote) and both can resume the system from sleep. Strangly the system did work for the first day and now even a clean install fails on resume...?

Vista x86, had no issues at all, rock solid operation for almost a year.

System config:

Gigabyte EP45ds4 (BIOS P9), E8400, ATI HD2600pro (this card only works with driver 8.12 in Vista SP2 compatibility mode to enable svideo output), HVR2200.

View 3 Replies View Related

Wireless Disabled After Sleep Resume?

Aug 17, 2012

I have a weird issue with my wireless adapters. I will put my computer to sleep and then resume my work a few hours later, when the computer wakes up both wireless adapters are disabled and I have to go into adapter settings to re-enable them. My adapters are a netgear wna1100 usb adapter and an azio pci card adapter.

View 1 Replies View Related

Windows 7 Pc Slow To Resume From Sleep

Oct 1, 2012

Having problems with my Windows 7 PC which is periodically slow to resume from sleep.System Specs is up to date, note op system is on 128GB Sandisk SSD.

View 9 Replies View Related

Resume From Sleep Drops Overclock

May 21, 2012

I am having some issues with Windows and resuming from sleep. I have an overclock of 4.2 GHz and everything works great, but after I resume windows from sleep, the clock drops to normal Turbo Boost Ratios ranging from 3.4 to 3.8. Naturally after a restart the clock goes back to 4.2 as if nothing ever happened.

Note: I have tried Disabling various power functions in the BIOS such as EIST, C1E, etc.

Specs:

Gigabye Z77X-UD5H
i7-2600K @ 4.2GHz
G.SKILL Ripjaws DDR3 2133 16GB
Sapphire 6950 2gb Dirt 3 Edition
Creative X-Fi Titanium
Crucial m4 128GB Rev.000F
600 GB Velociraptor
3 x Other Storage HDDs
Thermaltake Toughpower 850W

View 5 Replies View Related

Sound Card Not Getting Recognized By Windows 7 X64 - Works Fine In 32bit

Apr 13, 2011

Machine specs:
Antec 900 ATX case
Tyan Tiger K8WE S2877-G2NR mobo
Dual AMD Opteron 275 dual-core @ 2.2GHz
3 GB Ram, 2x BFG Nvidia GeForce 9600GT
in SLI config, 2x Seagate 750GB 7200RPM SATA HDD's Thermaltake Black Window 850 W power. LG CD/DVD/RW Creative Sound Blaster SE (model SB0570)

Dual Boot
OS Drive 1 Windows 7 Ultimate 32 bit
OS Drive 2 Windows 7 Ultimate 64 bit

Problem: Sound card works fine in 32 bit, but is unrecognized in 64 bit. All other systems nominal. Solutions tried to date.
(1) Sound card un and re-installed.
(2) SB solution SID 82669 (force detection through LGPE, D/L and install new drivers) Failed.

View 3 Replies View Related

System Reserved Partition Is Missing, But Windows 7 Pro Works Fine?

Feb 16, 2012

I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?

View 5 Replies View Related

Unable To Connect To Modem/internet Via Lan But Wireless Works Fine

Dec 4, 2012

My desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:

1. Replaced the ethernet cord with one I know is working

2. Full scanned my pc for viruses

3. Disabled all firewalls and virus protection programs

4. Restored my pc to a previous save state

5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit

6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:

C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid

[code]....

View 9 Replies View Related

Windows 7 Crashes With BSOD On Sleep Resume?

Mar 19, 2012

I am using windows 7 ultimate and facing great problem. Whenever I put my PC to sleep, on resuming it crashes giving a blue screen of death message. I am never able to put my PC on sleep which quite inconvenient. Actually my video card does not support windows 7 aero or there are no WDDM drivers available for my card which is ATI RADEON 9250. I am ready to upload any crash minidump files or any other log files. Also tell me if any WDDM drivers are there for my video card as I am not able to get them anywhere. Is this video card the only reason for the problem

View 2 Replies View Related

Resume From Sleep Failure - Power-up Loop?

Apr 8, 2012

Have a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.

View 1 Replies View Related

PC Won't Resume If Screen Goes Black/Won't Go Into Sleep Mode

Nov 20, 2010

I'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved