Windows 7 Pc Slow To Resume From Sleep
Oct 1, 2012Having problems with my Windows 7 PC which is periodically slow to resume from sleep.System Specs is up to date, note op system is on 128GB Sandisk SSD.
View 9 Replies
ADVERTISEMENT
Slow Resume From Sleep If Sleep For Long Time
Apr 21, 2011I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
View 2 Replies View RelatedSlow Resume From Sleep/Hibernate
Jun 30, 2012I have a Lenovo ThinkPad T400 running a fresh install of Win7 Pro x64 with SP1. I did the clean install as normal, getting necessary drivers from Lenovo and leaving the rest to Windows. In the past this has worked well.
This time I am having an issue where resuming from sleep or hibernate takes longer than starting the system from shutdown. Looking at the event logs it seems to be driver related. I open the lid, press the power button, and I get nothing other than a power light, no HDD access light as usual. This usually takes quite a while. Once I get to the logon screen, it is unresponsive to both password and fingerprint reader. It sits like that for a while and than after logging on everything works fine.
The machine has ran Norton Internet Security 2012 from day 1 and I have no reason to believe that this is malware related.
I have saved the "Diagnostics-Performance" section of event viewer an EVTX file which should be attached to this post. It will open in event viewer.
EDIT: It says I am not permitted to upload this kind of file? I have uploaded it to MS SkyDrive instead. [URL]
Lenovo ThinkPad T400
Win7 Pro x64 SP1
Intel C2D T9400
8GB RAM
Crucial M4 64GB SSD
500GB Secondary HDD
14" WXGA+ 1440x900
Switchable Intel/ATI Graphics (ATI disabled)
Screen Does Not Resume On Resume From Sleep?
Oct 17, 2012I'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).
Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.
The only solution is to shut down the system manually and boot it up again.
Windows 7 Freezes On Resume From Sleep?
Jan 13, 2013Win 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.
View 4 Replies View RelatedWindows 7 Does Not Resume Correctly After Sleep
Feb 6, 2011Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.
View 2 Replies View RelatedWindows 7 Won't Resume From Sleep; Restart Not Available?
Apr 25, 2011My laptop (Dell Vostro V13) is stuck in some kind of limbo. It went into sleep mode and won't wake up fully! It "resumes" the boot-up sequence right up until the four windows colors do their characteristic swirl animation - then the screen goes black.I can't seem to force a fresh restart b/c every time I power off and back on, the laptop tries to *resume* and gets stuck again.Hitting F2 and F12 allows me to run bios and memory tests, but to no avail. The laptop always attempts a resume.How do I break this sleep-resume cycle and do a fresh restart? Reinstalling the OS is out of the question (too many important files will be erased
View 5 Replies View RelatedWindows 7 Crashes With BSOD On Sleep Resume?
Mar 19, 2012I am using windows 7 ultimate and facing great problem. Whenever I put my PC to sleep, on resuming it crashes giving a blue screen of death message. I am never able to put my PC on sleep which quite inconvenient. Actually my video card does not support windows 7 aero or there are no WDDM drivers available for my card which is ATI RADEON 9250. I am ready to upload any crash minidump files or any other log files. Also tell me if any WDDM drivers are there for my video card as I am not able to get them anywhere. Is this video card the only reason for the problem
View 2 Replies View RelatedSleep Mode Resume Bsod
Jan 10, 2012i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
View 4 Replies View Related7068, X64: Resume From Sleep Freezes W7
Apr 6, 2009Although I found some issues that are almost similar, nothing seems to really solves the issue I have.
Build 7068, x64 freezes after a resume from sleep (S3). The desktop image is visible but the system totally hangs. Only a hard power down works.
I use two USB devices (keyboard and remote) and both can resume the system from sleep. Strangly the system did work for the first day and now even a clean install fails on resume...?
Vista x86, had no issues at all, rock solid operation for almost a year.
System config:
Gigabyte EP45ds4 (BIOS P9), E8400, ATI HD2600pro (this card only works with driver 8.12 in Vista SP2 compatibility mode to enable svideo output), HVR2200.
Wireless Disabled After Sleep Resume?
Aug 17, 2012I have a weird issue with my wireless adapters. I will put my computer to sleep and then resume my work a few hours later, when the computer wakes up both wireless adapters are disabled and I have to go into adapter settings to re-enable them. My adapters are a netgear wna1100 usb adapter and an azio pci card adapter.
View 1 Replies View RelatedResume From Sleep Drops Overclock
May 21, 2012I am having some issues with Windows and resuming from sleep. I have an overclock of 4.2 GHz and everything works great, but after I resume windows from sleep, the clock drops to normal Turbo Boost Ratios ranging from 3.4 to 3.8. Naturally after a restart the clock goes back to 4.2 as if nothing ever happened.
Note: I have tried Disabling various power functions in the BIOS such as EIST, C1E, etc.
Specs:
Gigabye Z77X-UD5H
i7-2600K @ 4.2GHz
G.SKILL Ripjaws DDR3 2133 16GB
Sapphire 6950 2gb Dirt 3 Edition
Creative X-Fi Titanium
Crucial m4 128GB Rev.000F
600 GB Velociraptor
3 x Other Storage HDDs
Thermaltake Toughpower 850W
Resume From Sleep Failure - Power-up Loop?
Apr 8, 2012Have a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.
View 1 Replies View RelatedPC Won't Resume If Screen Goes Black/Won't Go Into Sleep Mode
Nov 20, 2010I'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
View 8 Replies View RelatedComputer Resume From Sleep When Backup On A Schedule?
Nov 20, 2009Will the computer automatically resume from sleep when Run backup on a schedule is set at a time when the computer is sleeping or do we have to tweak the task scheduler?
View 1 Replies View RelatedHard Drives Disappear After Sleep Resume
Oct 30, 2009I installed Windows 7 x64 on my HTPC and have found that after resuming from S3 sleep, my media drive (1TB WD 10EACS) is missing. The drive is not seen in Disk Management and is not discovered when I scan for new hardware. The only way to get the hard drive back is to reboot. Power and data cables are secure. This exact build did not have this issue when running Vista. Win7 is the only change. If I enter S3 and then immediately wake the system the HDD is still there. The problem seems to occur when the HTPC is in standby for a longer period. like overnight.
This is on a GA-MA69GM-S2H motherboard with the SB600 SATA controller running the latest drivers in AHCI mode. I switched to IDE mode and the problem has not occurred for two days. (/crosses fingers)
This is a critical flaw for HTPC use since S3 sleep is a must. My HTPC missed several TV recordings because when it woke up my media drive was gone and I'd like to prevent this from happening again. (This really reduces the WAF!)
I posted on the TechNet forum with others having the same problem here: HDD not waking from sleep Windows 7 RTM?
I thought I'd open the topic for discussion here at Tom's since the forum here is more robust. Anyone else observing this behavior in Windows 7? Does anyone know of a fix for AHCI mode?
Occasionally Get No Internet Access After Power Up Or Resume From Sleep
Sep 4, 2012I have Win7 on my desktop PC, and sometimes when I start up the computer, it won't have any internet access. On more rare occasions, it will do the same thing when I resume from Sleep. Windows usually solves the problem by itself, but it that takes about a minute or so.
I know it's not the modem or the router, becuz other computers on my wi-fi network can access the internet even when the main PC can't. I did a search and found a few things about reinstalling Office 2010 or disabling IPv6, but that doesn't work for some people. Those posts are also 3-4yrs old, so it seems like there should have been patches
Netbook Can't Resume From Sleep BUT Works Fine From Hybernation
Mar 9, 2012i have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
1 The following boot-start or system-start driver(s) failed to load: cdrom
2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA
3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.
4 Audit events have been dropped by the transport. 0
5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP
6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER
7 The previous system shutdown at 07:28:23 on 09/03/2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:
- changing Power options, restored "defaults", changed hybrid sleep on/off
- BIOS is useless as there's no power management options, is a netbook.
- roll back / reinstalled Nvidia video drivers
- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...
Blue Screen Error During Resume From Hibernate Or Sleep Mode
Apr 15, 2011I am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
View 1 Replies View RelatedLCD Brightness Control Doesn't Work After Resume From Sleep / Hibernation
Jun 12, 2011Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
View 2 Replies View RelatedWindows 7 Becoming Slow After Sleep?
Jun 11, 2011My win7 pc is becoming very slow after it goes to sleep when not used for a while.Wander what can I do to find out what the problem is.
View 3 Replies View RelatedUSB Mouse Slow To ERspond After Wake From Sleep
Feb 19, 2010I have a Razer Copperhead USB Mouse. Specs of my desktop can be found here: TechComet: My Gadgets, Basically, I put my desktop to sleep (using S3-STR) and when I wake it up my moues does not respond for about 15-30 s after which it works fine. I am running Windows 7. I have no other problems with my system, my keyboard responds fine and I have all necessary drivers installed. I have no idea why this is happening and the fact that my computer resumes from sleep in 2 seconds is great, but not when I have to wait another 30 for the mouse to work!
View 5 Replies View RelatedExtremely Slow Boot After Hybrid Sleep
May 10, 2011I use Windows 7 Pro x64 in my Car PC.Hybrid Sleep is enabled, because my CarPC-PSU only keeps up the 5V rail for 18 Hours. After that the power is shut down.When I wake the PC from standby (within the 18 hours), everything works fine. Windows responds within a few seconds.If the PC has been put to standby and the PSU shuts down the 5V rail, the startup from hybrid sleep/hibernate is extremely slow. It takes approx. 5 minutes before I can use Windows again.What's strange is: When I put the PC to sleep/hibernate manually and boot it up again, everything is MUCH faster. Normal hibernate boot I'd guess.Only when the PC initially was put to hybrid standby and power cutted off it boots that slow.I can replicate the same behaviour on my Desktop PC.
-Boot from Standby: Really Fast
-Boot from manual Hibernation: Normal
-Boot from Hybrid Standby atfter PowerOff: Extremely slow
Windows 7 Won't Resume
Feb 21, 2013My computer wont resume with windows resume loader. Anytime i start the computer from a shutdown or hibernation/sleep it gives me the option of continue with system resume or delete restoration data and proceed to system boot menu. If i click continue with resume it gives a black screen with this "_" in the upper left corner and never loads. It doesn't let me go back to what i was doing upon using hibernate, sleep, or anything that would save what i was doing.
View 2 Replies View RelatedBSOD On Windows Resume?
Jan 23, 2011simply put every time my computer is on hibernate i get the BSOD when i resume windows, if i choose resume windows normally it works fine as if nothing happened, I've searched online, and lots of threads and forums say that i should locate and upload my dump files or folder and so on, i have windows 7 64x, but i can't seem to find any dump, no folder and no .dmp files either also tried *.dmp i got a few Mozilla dumps but that's it, even used SF Diagnostic Tool, and it says no dumps found?
View 9 Replies View RelatedWindows 7 Hibernation Does Not Resume
Dec 5, 2010I have a problem with hibernate/sleep in windows 7.when i set pc to hibernate or sleep, the power turn off, but it does not resume. I press any key on keyboard, power does not come back on, then i push power button, power on and display not windows unexpected shutdown screen, choose safe mode or start windows normally, no blue screen or crash dump. I tried all kinds of settings. still same.
View 9 Replies View RelatedCan't Resume Windows 7 On Dell SRS?
Oct 4, 2012I tried hitting the on off button. Says windows is resuming but nothing happens and screen goes black. Hear fans come on. Last night I had recovered a Word Document Office 2010 and not saved it. Son logged off and recovery file was created last night.Was able to get on this morning and recoved the document, but never saved or named it. I may have closed the laptop lid. Not sure if that makes laptop go into sleep mode or hybernate.F2 setup and F12 reboot are available options when the Resuming window come up. Then that disappears and screen is blank. Makes sounds like it will come up but it doesn't.Saw an earlier post that said: If its trying to resume then it should give you an option to either
1) Continue w/ system resume, or
2) Delete restoration data and proceed to system boot
Try option 2.If you are not given this choice, restart the computer manually and start hitting F8 about once a second until you get to a selection screen. Choose to start windows normally and let us know how it goes.I tried hitting F8 and nothing happens. Then I saw another post that said to hit F12 and run the diagnostics... that is what I am doing now. It is in the prediagnostics now and said the next test is 30 minutes. All tests were passed and it is doing memory checks. Other post said it ran all night.Do you need to go through all the diagnostics to be able to use F8?Or will I need to turn the computer off and on again and see the resuming screen and then hit F8?
Windows 7 Resume Loader?
Apr 10, 2012My key board is locked. I cant use my usb mouse. All I get on start up is the last attemp to resume the system frome its previous location failed. Attempt to resume again? continue with system resume or delete restoration data and proceed to system boot menu on a black screen.
View 1 Replies View RelatedWindows Resume Error?
Nov 3, 2012I built my own system quite sometime ago and unfortunately I don't know much programming and I have ran into troubles... I tripped a circuit breaker in my house and my computer shut down but now when I turn it on I get the windows failed to load message.... I am using windows 7 just to give an idea and the message says "the last attempt to resume the system from its previous location failed. attempt to resume again? Under that it says continue with system resume or delete restoration data and proceed to system boot menu. I have tried the first option and it says resuming windows then goes to a blinking
View 4 Replies View RelatedFrozen Windows Resume Loader
Feb 9, 2013I have done some looking around and have found lots of mentions of the same issue but people tend to skip through some of the in between key steps as they are working on their own computers and not trying to do this blind.
I had no idea at first what she'd done but apparently this is a common problem. Basically, if a netbook's battery goes dead while it is hibernating then it creates a problem when the user reboots. The machine gets to the windows resume loader page and then freezes there. It offers you a choice but the keyboard is unresponsive. I got her to force quit and restart but same thing.
I found that many were able to use a PS2 keyboard to work around this but my mom does not have one. She doesn't have a start up disc or anything like that.
I found this solution elsewhere but as you see, the guy skips the key steps: Hopefully your computer gives you the opportunity to visit you bios settings/ peripherals. You can usually access this at the very beginning of startup by following the prompts such as "F1, F9, DEL, TAB, "....etc. I am pretty sure that each Motherboard has a different setup. Once I found My way to the peripherals I was able to scroll down to "USB keyboard" and saw that it was disabled. I enabled it, saved those settings and continued on to the "RESUME LOADER" page that had not been responsive before and Ta-Da!!!! it worked.
So, I need the easiest, most explainable steps to follow so I can walk my mom through them. It is the f8 key you press upon startup to get to get to safemode? Or does this guy mean to actually press F1 then F9 and so on?
manually enable the keyboard on her netbook and get past this.
Resume Windows Straight To Desktop?
Nov 3, 2011I just bought a new ultrabook and I love its SSD and instant-resume. What I don't love, is that it instantly resumes to the login screen. I have only a single user account, with no password associated with it, and yet I'm still unable to find a way for my computer to skip the login screen when I lift the lid of my notebook after the machine has suspended. Other posts say how to do it to skip the login on first booting the system (netplwiz), or how avoid entering sleep / hibernate modes, but neither of those options are quite what I'm looking for
View 3 Replies View Related