I have a Lenovo ThinkPad T400 running a fresh install of Win7 Pro x64 with SP1. I did the clean install as normal, getting necessary drivers from Lenovo and leaving the rest to Windows. In the past this has worked well.
This time I am having an issue where resuming from sleep or hibernate takes longer than starting the system from shutdown. Looking at the event logs it seems to be driver related. I open the lid, press the power button, and I get nothing other than a power light, no HDD access light as usual. This usually takes quite a while. Once I get to the logon screen, it is unresponsive to both password and fingerprint reader. It sits like that for a while and than after logging on everything works fine.
The machine has ran Norton Internet Security 2012 from day 1 and I have no reason to believe that this is malware related.
I have saved the "Diagnostics-Performance" section of event viewer an EVTX file which should be attached to this post. It will open in event viewer.
EDIT: It says I am not permitted to upload this kind of file? I have uploaded it to MS SkyDrive instead. [URL]
I am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
Having problems with my Windows 7 PC which is periodically slow to resume from sleep.System Specs is up to date, note op system is on 128GB Sandisk SSD.
I'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).
Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.
The only solution is to shut down the system manually and boot it up again.
after since a few days, my computer has been getting Bad_Pool_Caller BSOD most of the time after i start to resume back my computer after hibernating it.
Im running on a MS WINDOWS 7 ENTERPRISE 32-BIT SP1 INTEL CORE I5 @ 2.27GHZ ARRANDALE 32NM TECHNOLOGY RAM 2.0 GB SINGLE CHANNEL -DDR3 @ 532 MHZ GRAPHICS ATI MOBILITY RADEON HD 4500 SERIES
I see other forums stating about needing a minidumps file, cause the BSOD is really interrupting my lessons in school because I'm using laptop most of the time.
[URL] my problem all started when I accidentally pressed the sleep button on my keyboard. While that was happening I had just started loading a game called League of Legends, had my web browser up, and had a microphone program called Ventrilo all running in the background. Monitor went black and into standby, computer's main light went from blue to orange. When I tried to click on my mouse/press keys on my keyboard it came out of sleep but still no signal from the monitor, I then restarted the computer from it's main switch and still no change. I could hear through my headphones that the computer had booted and made it to the log in screen, but still no monitor signal. The graphics card I'm using in my PCI-E slot at the moment is a Galaxy 450 GTS, been working fine for over 4 months until now (Uses a DVI Cable). At this point I decided to switch out a PCI-E card that uses VGA instead of DVI to see if my chord was buggy knowing that the card is in fully working condition just less powerful, still no change. I plugged my monitor into another computer and my onboard graphics card, works fine.
Thing that I've tried:
-Reset cmos
-Reset motherboard battery
-Seated a VGA PCI-E Graphics Card that I know works fine, still no monitor signal
-System restore
-Tested RAM and took each stick out one by one booting each time individually
-Reseated the graphics card
-Tested Monitor on another computer (Working)
-Made sure all power connections are firm
-Changed my power settings to never hibernate
Onboard graphics card is working, but won't recognize that there's any card in my PCI-E slot (Fan works on the card showing it has power). I've read through different forums that people have had a similar problem but none seem to be exactly the same as mine. I've searched through my BIOS (Very limited options to say the least) and cannot find anywhere how to disable my onboard graphics card and make PCI-E primary. I've tried to uninstall my video drivers and reinstall, but because it doesn't find the GTS 450, it wont let me apply the drivers. The other day it made 7 beeps during post, from what I read means it's a video ram issue, but now that has stopped after putting my BIOS settings to default. The only solution that I can think of off the top of my head is to reformat Windows 7 Ultimate 32bit.
url...my problem all started when I accidentally pressed the sleep button on my keyboard. While that was happening I had just started loading a game called League of Legends, had my web browser up, and had a microphone program called Ventrilo all running in the background. Monitor went black and into standby, computer's main light went from blue to orange. When I tried to click on my mouse/press keys on my keyboard it came out of sleep but still no signal from the monitor, I then restarted the computer from it's main switch and still no change. I could hear through my headphones that the computer had booted and made it to the log in screen, but still no monitor signal. The graphics card I'm using in my PCI-E slot at the moment is a Galaxy 450 GTS, been working fine for over 4 months until now (Uses a DVI Cable). At this point I decided to switch out a PCI-E card that uses VGA instead of DVI to see if my chord was buggy knowing that the card is in fully working condition just less powerful, still no change. I plugged my monitor into another computer and my onboard graphics card, works fine.
-Reset cmos
-Reset motherboard battery
-Seated a VGA PCI-E Graphics Card that I know works fine, still no monitor signal
-System restore
-Tested RAM and took each stick out one by one booting each time individually
-Reseated the graphics card
-Tested Monitor on another computer (Working)
-Made sure all power connections are firm
-Changed my power settings to never hibernate
Onboard graphics card is working, but won't recognize that there's any card in my PCI-E slot (Fan works on the card showing it has power). I've read through different forums that people have had a similar problem but none seem to be exactly the same as mine. I've searched through my BIOS (Very limited options to say the least) and cannot find anywhere how to disable my onboard graphics card and make PCI-E primary. I've tried to uninstall my video drivers and reinstall, but because it doesn't find the GTS 450, it wont let me apply the drivers.The other day it made 7 beeps during post, from what I read means it's a video ram issue, but now that has stopped after putting my BIOS settings to default. The only solution that I can think of off the top of my head is to reformat Windows 7 Ultimate 32bit.
I just upgraded my HP TX252NR laptop to an Intel X25-M 160 GB SSD. I did a clean install of Win 7 Ultimate 64 bit. I have 3 GB of RAM. My laptop takes about 70 sec from a cold boot to login. This is much faster than the 5400 rpm drive and Vista Ultimate 64 bit. My problem is that if I hibernate the laptop it takes over 3 minutes for it to get to the point I can login. The resuming Windows screen comes up in about 20 sec which is roughly how long it takes to get to the starting Windows screen, then it seems to hang here anywhere from 2.5 to 3.5 minutes. The disk activity indicator is off and the CPU fan is running full speed. My disk score is 7.6 and my processor score is 4.8. I have update the SSD firmware to the latest. I have updated the laptop to the latest BIOS as well. Win 7 is updated with all the latest patches.
i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
Win 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.
Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.
My laptop (Dell Vostro V13) is stuck in some kind of limbo. It went into sleep mode and won't wake up fully! It "resumes" the boot-up sequence right up until the four windows colors do their characteristic swirl animation - then the screen goes black.I can't seem to force a fresh restart b/c every time I power off and back on, the laptop tries to *resume* and gets stuck again.Hitting F2 and F12 allows me to run bios and memory tests, but to no avail. The laptop always attempts a resume.How do I break this sleep-resume cycle and do a fresh restart? Reinstalling the OS is out of the question (too many important files will be erased
Although I found some issues that are almost similar, nothing seems to really solves the issue I have.
Build 7068, x64 freezes after a resume from sleep (S3). The desktop image is visible but the system totally hangs. Only a hard power down works.
I use two USB devices (keyboard and remote) and both can resume the system from sleep. Strangly the system did work for the first day and now even a clean install fails on resume...?
Vista x86, had no issues at all, rock solid operation for almost a year.
System config:
Gigabyte EP45ds4 (BIOS P9), E8400, ATI HD2600pro (this card only works with driver 8.12 in Vista SP2 compatibility mode to enable svideo output), HVR2200.
I have a weird issue with my wireless adapters. I will put my computer to sleep and then resume my work a few hours later, when the computer wakes up both wireless adapters are disabled and I have to go into adapter settings to re-enable them. My adapters are a netgear wna1100 usb adapter and an azio pci card adapter.
I am having some issues with Windows and resuming from sleep. I have an overclock of 4.2 GHz and everything works great, but after I resume windows from sleep, the clock drops to normal Turbo Boost Ratios ranging from 3.4 to 3.8. Naturally after a restart the clock goes back to 4.2 as if nothing ever happened.
Note: I have tried Disabling various power functions in the BIOS such as EIST, C1E, etc.
I am using windows 7 ultimate and facing great problem. Whenever I put my PC to sleep, on resuming it crashes giving a blue screen of death message. I am never able to put my PC on sleep which quite inconvenient. Actually my video card does not support windows 7 aero or there are no WDDM drivers available for my card which is ATI RADEON 9250. I am ready to upload any crash minidump files or any other log files. Also tell me if any WDDM drivers are there for my video card as I am not able to get them anywhere. Is this video card the only reason for the problem
Have a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.
I'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
Will the computer automatically resume from sleep when Run backup on a schedule is set at a time when the computer is sleeping or do we have to tweak the task scheduler?
I installed Windows 7 x64 on my HTPC and have found that after resuming from S3 sleep, my media drive (1TB WD 10EACS) is missing. The drive is not seen in Disk Management and is not discovered when I scan for new hardware. The only way to get the hard drive back is to reboot. Power and data cables are secure. This exact build did not have this issue when running Vista. Win7 is the only change. If I enter S3 and then immediately wake the system the HDD is still there. The problem seems to occur when the HTPC is in standby for a longer period. like overnight.
This is on a GA-MA69GM-S2H motherboard with the SB600 SATA controller running the latest drivers in AHCI mode. I switched to IDE mode and the problem has not occurred for two days. (/crosses fingers)
This is a critical flaw for HTPC use since S3 sleep is a must. My HTPC missed several TV recordings because when it woke up my media drive was gone and I'd like to prevent this from happening again. (This really reduces the WAF!)
I posted on the TechNet forum with others having the same problem here: HDD not waking from sleep Windows 7 RTM?
I thought I'd open the topic for discussion here at Tom's since the forum here is more robust. Anyone else observing this behavior in Windows 7? Does anyone know of a fix for AHCI mode?
I have Win7 on my desktop PC, and sometimes when I start up the computer, it won't have any internet access. On more rare occasions, it will do the same thing when I resume from Sleep. Windows usually solves the problem by itself, but it that takes about a minute or so.
I know it's not the modem or the router, becuz other computers on my wi-fi network can access the internet even when the main PC can't. I did a search and found a few things about reinstalling Office 2010 or disabling IPv6, but that doesn't work for some people. Those posts are also 3-4yrs old, so it seems like there should have been patches
i have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
1 The following boot-start or system-start driver(s) failed to load: cdrom
2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA
3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.
4 Audit events have been dropped by the transport. 0
5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP
6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER
7 The previous system shutdown at 07:28:23 on 09/03/2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:
- changing Power options, restored "defaults", changed hybrid sleep on/off
- BIOS is useless as there's no power management options, is a netbook.
- roll back / reinstalled Nvidia video drivers
- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...
I have a dell XPS1702x laptop Windows 7 64, this problem came up in the last 5 days after I installed a logitech M705 mouse and software.When ever I put my laptop in sleep or hibernate and start up again I get a blank screen, but the laptop seems tobe running I have to turn the computer off and then on again using the power button. My computer then restarts and opens in the Error Recovert Screen stating that the computer was turned off improperly and ask if I want to restart Windows. I have preformed a complete Virus scan with Nortons 360, I have updating all my software, uninstalled the mouse and returned to my old mouse and the software for the new mouse and the problem is still there.
I have been trying to make my computer go into hibernation but it comes out of it 5 mins later. I have tried everything. disabling mouse to wake up, turning off power management on lan, turned off wol, and disk defragmentor.
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
I've got a new ASUS gaming laptop with Windows 7 64-bit OEM and I've been getting a few BSOD errors while bringing my laptop out of sleep/hibernate. Its not always but its often enough to be a nuisance. My drivers are all up to date
I have two new laptops (an HP and a Gateway) with Win 7 Pro on each, and set up exactly the same. On the Gateway, the sleep and hibernate work fine.On the HP, the sleep and hibernate are greyed out.Using cmd: powercfg -a The Gateway shows " the following sleep states are available ... Standby (S3),Hibernate Hybrid Sleep"..The HP shows "sleep states not available..system firmware does not support standby state" "legacy driver vgasave .. prevents this standby state"..How can I get my HP to support sleep/hibernate?
Is this possible? I have my hard drive on my laptop truecrypted. So when I wake it up from hibernate I have to enter my password at the bootmanager, and then a windows password when I log in, too much work. Especially when the bootmanager password is like 30 characters and the windows one is like 20. So is there a way to only ask for a password from sleep but not from hibernate?
