Although I found some issues that are almost similar, nothing seems to really solves the issue I have.
Build 7068, x64 freezes after a resume from sleep (S3). The desktop image is visible but the system totally hangs. Only a hard power down works.
I use two USB devices (keyboard and remote) and both can resume the system from sleep. Strangly the system did work for the first day and now even a clean install fails on resume...?
Vista x86, had no issues at all, rock solid operation for almost a year.
System config:
Gigabyte EP45ds4 (BIOS P9), E8400, ATI HD2600pro (this card only works with driver 8.12 in Vista SP2 compatibility mode to enable svideo output), HVR2200.
Win 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.
I'm running Windows 7 Home Premium SP 1 64-bit on a HP 620 (just a year old).
Lately, whenever I return to the laptop having left it alone for some time (Power Management set to 'Sleep' after 10 mins), and try to resume, I can hear the it resuming (fans etc.), however, the screen remains completely black.
The only solution is to shut down the system manually and boot it up again.
I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
i am including the minidump from the latest crash to see if i can get some help with this one, it is driving me nuts. i put the pc to sleep at night and then when resumed in the morning i am either greeted with a smooth working desktop or a bsod. i am at my wits end trying to sort this out, so i will come and ask the experts.
I have a Lenovo ThinkPad T400 running a fresh install of Win7 Pro x64 with SP1. I did the clean install as normal, getting necessary drivers from Lenovo and leaving the rest to Windows. In the past this has worked well.
This time I am having an issue where resuming from sleep or hibernate takes longer than starting the system from shutdown. Looking at the event logs it seems to be driver related. I open the lid, press the power button, and I get nothing other than a power light, no HDD access light as usual. This usually takes quite a while. Once I get to the logon screen, it is unresponsive to both password and fingerprint reader. It sits like that for a while and than after logging on everything works fine.
The machine has ran Norton Internet Security 2012 from day 1 and I have no reason to believe that this is malware related.
I have saved the "Diagnostics-Performance" section of event viewer an EVTX file which should be attached to this post. It will open in event viewer.
EDIT: It says I am not permitted to upload this kind of file? I have uploaded it to MS SkyDrive instead. [URL]
Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.
My laptop (Dell Vostro V13) is stuck in some kind of limbo. It went into sleep mode and won't wake up fully! It "resumes" the boot-up sequence right up until the four windows colors do their characteristic swirl animation - then the screen goes black.I can't seem to force a fresh restart b/c every time I power off and back on, the laptop tries to *resume* and gets stuck again.Hitting F2 and F12 allows me to run bios and memory tests, but to no avail. The laptop always attempts a resume.How do I break this sleep-resume cycle and do a fresh restart? Reinstalling the OS is out of the question (too many important files will be erased
I have a weird issue with my wireless adapters. I will put my computer to sleep and then resume my work a few hours later, when the computer wakes up both wireless adapters are disabled and I have to go into adapter settings to re-enable them. My adapters are a netgear wna1100 usb adapter and an azio pci card adapter.
Having problems with my Windows 7 PC which is periodically slow to resume from sleep.System Specs is up to date, note op system is on 128GB Sandisk SSD.
I am having some issues with Windows and resuming from sleep. I have an overclock of 4.2 GHz and everything works great, but after I resume windows from sleep, the clock drops to normal Turbo Boost Ratios ranging from 3.4 to 3.8. Naturally after a restart the clock goes back to 4.2 as if nothing ever happened.
Note: I have tried Disabling various power functions in the BIOS such as EIST, C1E, etc.
I am using windows 7 ultimate and facing great problem. Whenever I put my PC to sleep, on resuming it crashes giving a blue screen of death message. I am never able to put my PC on sleep which quite inconvenient. Actually my video card does not support windows 7 aero or there are no WDDM drivers available for my card which is ATI RADEON 9250. I am ready to upload any crash minidump files or any other log files. Also tell me if any WDDM drivers are there for my video card as I am not able to get them anywhere. Is this video card the only reason for the problem
Have a Windows 7 PC working fine for 6 months, now fails to resume from sleep every time. On attempting to resume the PC appears to go through a powering up loop (Hard disk and fan spin up) which then goes off and repeats indefinitely till you force the power off by holding town power button.When changing 'allow hybrid sleep' in Power Settings to disable; it cured it for a few days. The issue came back, so tried enabling this setting - same result. Disabled again, same result.Update Intel Graphics Drivers to latest. Fixed the issue again, just for a few days.
I'm having a problem where if my laptop is idle and the screen goes black, I can't get it to resume. I try moving the mouse and hitting buttons, but nothing happens. I have to completely shut the PC off and start it again. Also, if I put it to sleep, the same thing happens (it goes black but doesn't sleep or resume). My drivers are all up to date but it still happens.
Will the computer automatically resume from sleep when Run backup on a schedule is set at a time when the computer is sleeping or do we have to tweak the task scheduler?
I installed Windows 7 x64 on my HTPC and have found that after resuming from S3 sleep, my media drive (1TB WD 10EACS) is missing. The drive is not seen in Disk Management and is not discovered when I scan for new hardware. The only way to get the hard drive back is to reboot. Power and data cables are secure. This exact build did not have this issue when running Vista. Win7 is the only change. If I enter S3 and then immediately wake the system the HDD is still there. The problem seems to occur when the HTPC is in standby for a longer period. like overnight.
This is on a GA-MA69GM-S2H motherboard with the SB600 SATA controller running the latest drivers in AHCI mode. I switched to IDE mode and the problem has not occurred for two days. (/crosses fingers)
This is a critical flaw for HTPC use since S3 sleep is a must. My HTPC missed several TV recordings because when it woke up my media drive was gone and I'd like to prevent this from happening again. (This really reduces the WAF!)
I posted on the TechNet forum with others having the same problem here: HDD not waking from sleep Windows 7 RTM?
I thought I'd open the topic for discussion here at Tom's since the forum here is more robust. Anyone else observing this behavior in Windows 7? Does anyone know of a fix for AHCI mode?
I have Win7 on my desktop PC, and sometimes when I start up the computer, it won't have any internet access. On more rare occasions, it will do the same thing when I resume from Sleep. Windows usually solves the problem by itself, but it that takes about a minute or so.
I know it's not the modem or the router, becuz other computers on my wi-fi network can access the internet even when the main PC can't. I did a search and found a few things about reinstalling Office 2010 or disabling IPv6, but that doesn't work for some people. Those posts are also 3-4yrs old, so it seems like there should have been patches
i have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
1 The following boot-start or system-start driver(s) failed to load: cdrom
2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA
3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.
4 Audit events have been dropped by the transport. 0
5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP
6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER
7 The previous system shutdown at 07:28:23 on 09/03/2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:
- changing Power options, restored "defaults", changed hybrid sleep on/off
- BIOS is useless as there's no power management options, is a netbook.
- roll back / reinstalled Nvidia video drivers
- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...
I am having this blue screen error often occurs during resume from hibernate or sleep. Have been reading bleeping computers.com and figured out where to find the error report, and pasted it below. NO hardware or software changes done, everything seems to be updated from the update advisory. Please help me find a solution, it's getting annoying to have a computer these days and slightest problem.
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
I'm running windows 7 pro 64-bit and whenever my asus U31F goes into hibernate and i try to system resume, it takes over 5 minutes. The screen freezes on just saying system resume for a minute or two, then as the coloured balls that come in to make the windows logo - they come in frame by frame, pausing for ages on each frame.This whole process means i have to hard reset my computer if i need it quickly and is really really starting to annoy me. Is there anything i can do???Note: On further inspection - i've realised that the drive doesn't start spinning while the screen is freezed, and then when it does that's aboutwhen they balls start to come into the screen.
Today my desktop windows 7 32bit PC failed to load and has frozen at windows resume loader option page. I cannot select either of the options available as my KB will not select or move between the two options offered. I have entered BIOS where my KB works fine to look for USB options but there are none available on my system. My mobo is an abit KV-7 running phoenix BIOS.
Windows 7 is freezing in sleep mode now... I don't think it's my drivers or anything because 2 updates earlier it worked fine. I'm wondering if anyone knows if this is an RC problem, or if something is wrong with my computer. I hope not since this computer is only 2 week old... There is like nothing on it and everything downloaded has been from a disk so no viruses (well except kasperky anti-virus but I HOPE that would be clean lol).
Basically when I put it into sleep manually, I cannot get it out, and my power/reset buttons do not work, I actually need to turn off the electricity.
Oh, and it's not my screen considering I CAN turn my screen on but it goes right back into powersave mode (sleep mode). I DID force it out once, and it said no signal from the computer even though the computer is on. This leads me to believe it is the OS (or god forbid one of my parts).
I just realized something... I have on HD connected via sata cable, but I took the power away from it (I wanted to hear something). I mean is that the possible cause? I doubt it though since it's not registered as an HD due to having no power... And my sound card light is on, so I'm assuming that is still on when I put the computer in powersave mode... Maybe that's an issue?
I used the upgrade process in Windows 7 to go to Windows 7 from Vista. Everything works well except when I try to sleep (close the lid on laptop) or logoff. The system freezes sometimes and I have to force the system down with a power off.
It appears that the first attempt usually works. The next logoff/sleep is when the problem appears.
I have removed all third party software and the problem still occurs.
I updated to latest bios from Compaq for CQ70-134CA Laptop. No luck.
I changed the Power Plan to disable the sleep mode when the lid is closed. The system still freezes when the system goes into sleep mode after the set timeout.
I changed the Power Plan so that the hard drive does not go in power saving mode. Finally the system is stable but never goes into sleep mode.
Does anyone out there think that the hard disk going into Power Saving mode is the cause of this problem?
I've tried turning off hybrid sleep, installed all of the windows updates, and for whatever reason when I put my computer to sleep and wake it up the screen pops up, but once I click the computer becomes unresponsive and then later freezes.I don't know what can be the Problem, when I go into my BIOS and change it to sp1 it works but my pc isn't off fully. When it's on sp3 it freezes up.
i5 2500k Sapphire 7870 oc edition 2gb ddr5 ballistix 4x2 GB Seagate 1 TB HD Gigabyte z68x-ud3h-b3 motherboard Hyper 212 evo nzxt phantom case
Also Hibernate works, but when you wake it from sleep it boots back up, but once you click it becomes unresponsive and when you click a couple more times it freezes completely?
In Chrome I am repeatedly getting a warning that "The following plugin has crashed: Shockwave Flash". In opera, safari, and Firefox the browser crashes on the pages that the error pops up on but otherwise displays on Chrome. Anyone else have this issue?
I'm running 7068 64 bit and have tried upgrading to 7100 RC 64 bit but it won't let me, it tells me this version is not upgadeable? Anyone got any suggestions or am i going to have to instal a fresh copy from scratch?
EDIT: the problem has returned and the previous solution doesn't work anymore. Uploading new .ZIP file in OP and last reply.
I have been searching the Internet a bit to find a solution to this issue. Mostly this has been linked to specific programs (like iTunes), which I don't have. Someone said it might be BSOD so I did the procedure.
Basically, my laptop doesn't go to Sleep, but instead freezes. This happens when closing the lid, pressing the "power" button or doing manual Sleep from Start menu. The screen goes black, but won't "wake up" anymore - the only way out is a forced shutdown and restart. If the laptop is in this freezed state long enough it will shut itself down automatically. The machine is 2 months old with pre-installed Windows.
I was one of the lucky people who got an advance retail copy of Win 7 Ultimate. I've installed it on my HP Pavilion DV7 laptop and have discovered that both sleep mode and hibernate mode cause the computer to lock up completely requiring a forced power down. When entering sleep or hibernate mode the screen will shut off,
you'll see a few seconds of HD activity and then the computer completely locks up. The backlit multimedia keys above the keyboard remain lit (these normally turn off in sleep or hibernate mode) and all keys and buttons are unresponsive except the power button, which I can hold down for 5 seconds to force a power-off. The laptop shipped with Vista Home Premium, both sleep and hibernate modes worked perfectly with Vista.
I have updated the BIOS to the latest one which HP says is needed as it adds Win 7 support. I have read the other threads on the site talking about making changes to the various power settings, I have tried all of those suggestions and nothing seems to work. Unfortunately, the BIOS on this laptop does not have settings where I can edit the S1 and/or S3 modes but, again, sleep/hibernate worked perfectly under the previous OS. Has anyone seen something similar on another system and managed to fix it?
