I've tried turning off hybrid sleep, installed all of the windows updates, and for whatever reason when I put my computer to sleep and wake it up the screen pops up, but once I click the computer becomes unresponsive and then later freezes.I don't know what can be the Problem, when I go into my BIOS and change it to sp1 it works but my pc isn't off fully. When it's on sp3 it freezes up.
i5 2500k
Sapphire 7870 oc edition 2gb ddr5
ballistix 4x2 GB
Seagate 1 TB HD
Gigabyte z68x-ud3h-b3 motherboard
Hyper 212 evo
nzxt phantom case
Also Hibernate works, but when you wake it from sleep it boots back up, but once you click it becomes unresponsive and when you click a couple more times it freezes completely?
Win 7 home premium,4 GB RamApparently the computer resumes from sleep but really it freezes and no input from the keys or mouse are valid---at this point only option is to reboot.
Windows 7 is freezing in sleep mode now... I don't think it's my drivers or anything because 2 updates earlier it worked fine. I'm wondering if anyone knows if this is an RC problem, or if something is wrong with my computer. I hope not since this computer is only 2 week old... There is like nothing on it and everything downloaded has been from a disk so no viruses (well except kasperky anti-virus but I HOPE that would be clean lol).
Basically when I put it into sleep manually, I cannot get it out, and my power/reset buttons do not work, I actually need to turn off the electricity.
Oh, and it's not my screen considering I CAN turn my screen on but it goes right back into powersave mode (sleep mode). I DID force it out once, and it said no signal from the computer even though the computer is on. This leads me to believe it is the OS (or god forbid one of my parts).
I just realized something... I have on HD connected via sata cable, but I took the power away from it (I wanted to hear something). I mean is that the possible cause? I doubt it though since it's not registered as an HD due to having no power... And my sound card light is on, so I'm assuming that is still on when I put the computer in powersave mode... Maybe that's an issue?
I used the upgrade process in Windows 7 to go to Windows 7 from Vista. Everything works well except when I try to sleep (close the lid on laptop) or logoff. The system freezes sometimes and I have to force the system down with a power off.
It appears that the first attempt usually works. The next logoff/sleep is when the problem appears.
I have removed all third party software and the problem still occurs.
I updated to latest bios from Compaq for CQ70-134CA Laptop. No luck.
I changed the Power Plan to disable the sleep mode when the lid is closed. The system still freezes when the system goes into sleep mode after the set timeout.
I changed the Power Plan so that the hard drive does not go in power saving mode. Finally the system is stable but never goes into sleep mode.
Does anyone out there think that the hard disk going into Power Saving mode is the cause of this problem?
EDIT: the problem has returned and the previous solution doesn't work anymore. Uploading new .ZIP file in OP and last reply.
I have been searching the Internet a bit to find a solution to this issue. Mostly this has been linked to specific programs (like iTunes), which I don't have. Someone said it might be BSOD so I did the procedure.
Basically, my laptop doesn't go to Sleep, but instead freezes. This happens when closing the lid, pressing the "power" button or doing manual Sleep from Start menu. The screen goes black, but won't "wake up" anymore - the only way out is a forced shutdown and restart. If the laptop is in this freezed state long enough it will shut itself down automatically. The machine is 2 months old with pre-installed Windows.
Although I found some issues that are almost similar, nothing seems to really solves the issue I have.
Build 7068, x64 freezes after a resume from sleep (S3). The desktop image is visible but the system totally hangs. Only a hard power down works.
I use two USB devices (keyboard and remote) and both can resume the system from sleep. Strangly the system did work for the first day and now even a clean install fails on resume...?
Vista x86, had no issues at all, rock solid operation for almost a year.
System config:
Gigabyte EP45ds4 (BIOS P9), E8400, ATI HD2600pro (this card only works with driver 8.12 in Vista SP2 compatibility mode to enable svideo output), HVR2200.
I was one of the lucky people who got an advance retail copy of Win 7 Ultimate. I've installed it on my HP Pavilion DV7 laptop and have discovered that both sleep mode and hibernate mode cause the computer to lock up completely requiring a forced power down. When entering sleep or hibernate mode the screen will shut off,
you'll see a few seconds of HD activity and then the computer completely locks up. The backlit multimedia keys above the keyboard remain lit (these normally turn off in sleep or hibernate mode) and all keys and buttons are unresponsive except the power button, which I can hold down for 5 seconds to force a power-off. The laptop shipped with Vista Home Premium, both sleep and hibernate modes worked perfectly with Vista.
I have updated the BIOS to the latest one which HP says is needed as it adds Win 7 support. I have read the other threads on the site talking about making changes to the various power settings, I have tried all of those suggestions and nothing seems to work. Unfortunately, the BIOS on this laptop does not have settings where I can edit the S1 and/or S3 modes but, again, sleep/hibernate worked perfectly under the previous OS. Has anyone seen something similar on another system and managed to fix it?
About 2 months ago I started getting random freezes and would have to do a hard restart on my computer to restart. To see if it was a virus or any kind of malware, I did a clean reformat of my hard drive and was still having issues. Eventually it started taking forever to boot up and load files and I got a SMART status bad message. So I wound up replacing my hard drive with a brand new one and did a clean install of Windows 7. That seemed to fix the slow boot and file load times but now I'm still getting freezes. However they are not random. They seem to happen when I don't touch the computer for awhile, whether I have a program such as something downloading in the background or not. They also seem to happen when I close the computer and put it to sleep and leave it like that for awhile. I try to wake it up and I only get a black screen, however my computer is on as I can hear the components.
The strange thing is as long as I am actively using the computer it doesn't seem to do this. I was on it for about 6 hours yesterday night and nothing happened and the computer was working fine. I did various hard disk scans even though I know it can't be the hard drive seeing as I just replaced it. It also isn't my graphics card as I uninstalled the driver and let my computer run for awhile with the standard VGA adapter and it still froze after me not touching it for awhile. I also did a windows memory diagnostic scan and nothing came up. I'm thinking there are 2 seperate problems with my computer, one that I fixed by replacing the hard drive (the slow boot time and file loading times, it took me 20 minutes to open up windows explorer, it doesn't anymore.) and another that I am unsure of. Should I do more memtest passes? I heard that one is not enough and that you should do up to 7 to make sure your RAM isn't faulty.
Here are my computer specs: Model: Samsung R780 OS: Windows 7 Home Premium (64-bit) Processor: Intel Core i5 2.27 GHZ RAM: 4GB DDR3 Graphics Card: Nvidia GeForce GT 330M (1GB Video Memory) Hard Drive: 500 GB Hybrid SATA/Solid State (4GB of solid state memory), this is the new hard drive that I purchased.
I tried downloading updates for a game and it immediately froze. So maybe the freezing is still happening on a random basis...
It freezes everytime i put it into sleep mode, and also when i reboot it. In sleep mode, the monitor turns off, but the computer continues to run (fans and lights are still on). I at first thought it was a PSU issue, but then it started to hang during games and it also freezes while booting the computer. The first time it froze mid-bios, then it froze a couple of times after the bios (when loading an OS), and it is now frozen on the windows boot screen (The logo and "Starting Windows").
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
I know there are a bunch of sleep problems out there but I couldn't fine one similar to this after doing a forum search. Running Windows 7 Ultimate. Sleep used to work ok but now when I choose sleep from the start menu, the screen blacks out but the computer doesn't actually go to sleep. The fans, activity lights, hdd lights are all still running. If I move the mouse the screen comes back. However, if I just wait for the sleep timer to kick in then the computer does go to sleep (all fans stop running and all lights go out). I'm not sure what caused this. I use my pc as an HTCP and now when I push the power button on the remote the pc does not go to sleep.
I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
i have random freezes sometimes they are glitchy and rarely bsod all on bootup or up to about half hour in (which also turns of the mouse). also Internet doesn't autoplay playlists and all sugestions next to the video are black. this started a few weeks to a month ago, first it seemed just a minor annoyance but it started to become more often the last few days. i've tried some checks but without success. also i remember the week before those crashes that twice the screen driver crashed for a second or 2 and then a message popped up about how a monitor driver crash was adjusted, always when i played a certain game that is still in beta so i taught it was the game.
Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
I have a Win7 Ultrabook. I'm using Areca backup software to backup my personal data.I created a Scheduled Task to run my backup weekly.I set it so that it would wake from sleep to run the task. But I'm having trouble finding a setting to tell it to return to sleep if it woke itself up. Is it possible to do so?In the alternative, is there something I can insert in my batch file (the scheduled task runs a bat file) to tell my book to enter sleep mode?
this computer now goes to sleep for no reason I have looked in the power control and nothing is maked to close down at any time where else controls this
When I press on the sleep button, it will just bring me to the login menu where I enter my password. I typed in powercfg /requests into the command menu to see if there was something stopping my computer from sleeping.
My output was:
Display: None System: None Away mode: none
My computer was able to sleep earlier yesterday. I even tried to restore my Windows partition to 4 days before, but that did not fix it. The only significant thing that I did was messing around in Linux.
My audio was working well, but i decided to start recording find a way to improve my outbound audio quality (i'm an audiophile). I purchased a Fast Track Pro. Unlike other threads I've read, I'm not seeing any BSOD and its not crackling. My operating system will just stop functioning, or freeze for a half a second at a time. This can become frequent at about 10 times in a thirty second period requiring a restart. I had installed the latest x64 driver for my W7 x64 system from M-audio's website.
I uninstalled the driver and restarted, the issue persisted. I then installed the on-board audio driver and restarted, no system lag is present. The audio device-driver is acting up and I'm not sure why. Because i bought it used M-audio's support is a no-go. Are there any additional steps I can take which may troubleshoot this issue?
When i walk away from my Windows 7 PC, i'd like to lock the screen for good security and put it to sleep for good energy savings. Doesn't that make sense, at least in some situations? But if you lock it, you can't sleep it, and if you put it to sleep, then you can't lock it.
Probably most people lock it and allow it to go to sleep later after a timeout period. But we could all be greener if there were a way to do both sleep and lock at the same time. win7q has chosen the best answer to his/her question.Click here to view the answer that was selected.
I used to be able to press the power button, and my windows 7 would got "and stay" in sleep until I pushed the power button again. what to do to keep it in sleep?
I've got got a new tower with windows 7, its been fine for the last 3 weeks, yet today it keeps going to sleep and taking me to the switch user screen, I've checked all the settings and they are ok, and I am the only user account on it?
Could anyone tell me the sleep command of Windows 7?I have try that: Rundll32.exe Powrprof.dll,SetSuspendState Sleep but it doesn't work, it will become hibenate. It seems my computer doesn't support the Sleep mode, but I can click the "sleep" option in Start menu and it run perfectly.
I am using Windows 7 64bit Ultimate. My laptop, when going into Sleep, 1 out of say 7 times shuts down instead. Windows says it crashed and gives me some error logs. I am attaching the DMP file of the last one. I remember going to PERFORMANCE INFO & TOOLS > ADVANCED and it saying that a video drive may be to blame. I removed the video driver and let Windows update the driver itself. Am wondering if it somehow is still using that driver?
I put this on the wrong forum, so here it is on the correct one. Lately the Del Desktop PC with Windows 7 64 bit refuses to come out of sleep when it has been left for a period of hours. When I manually send it to sleep it does so and the mouse and keyboard are set to revive it. It revives as it should do if I move the mouse or hit a key. However whenever I leave it asleep for a long period such as several hours, it refuses to awake and I have to force a reboot with the power button. That produces the black screen which you get after a crash.
From time to time Windows 7 will not go to sleep (only the display will turn off). I have searched various forums and tried the following fixes: I have already made sure that network adapters are not allowed to wake up the computer. I typed "POWERCFG -ENERGY" in the command prompt (as administrator) and an energy report was generated, which reported this error: System Availability Requests:System Required Request The service has made a request to prevent the system from automatically entering sleep. Requesting Service Spooler Opening task manager, I see a process running called "splwow64.exe" -- is this the spooler preventing the computer from sleeping?
A few weeks ago, my computer started acting up. Whenever it goes to sleep, it shuts off completely for about a second, then goes into a sort of 'zombie' mode in which only the fans and lights are on. The computer won't wake up if you use the mouse or keyboard. The only way to wake it up is to hit the "restart" button, upon which it will show a standard booting screen (Asus, then windows). Upon logging in, everything is there, as if it simply went into hibernate. The same thing happens if I sleep manually, and even when I go into hibernate. I've tried toggling the power settings and scanning for viruses. I was even going to do a system restore, but it hadn't logged any days.
There seem to be quite a few people with this problem, so I wrote this tutorial to quickly solve it. This is a problem with the Sleep mode that desktop computers use. Normally, Sleep is the only option, and Hibernate is not available to desktops. The problem appears to be caused by the Hybrid Sleep option (this simply sets the computer to sleep, but stores a hibernate file in case of a power loss). This tutorial will show you how to both enable Hibernate, as well as fix this problem.
