Pc Works Just Fine Until Go Into Facebook Games?
Aug 12, 2012pc works just fine until i go into Facebook games. The screen then fades and freezes. This is with all games.
View 3 Repliespc works just fine until i go into Facebook games. The screen then fades and freezes. This is with all games.
View 3 RepliesI have a number of users that I support that cannot open a PDF file downloaded from a training website (external website, not intranet). Using IE8 they get a flash of status bar activity and then nothing. On my computer with IE9 I have no issues opening them at all. I've changed all the security, privacy, content and advanced settings to match what I see in my internet options, but that hasn't helped.
I can't figure out what has changed between IE8 and IE9 that causes this. Adobe Reader 9 is installed on all machines. Firefox 10.0.2 will open the files also, but has issues with some of our propriety software so we can't use it as a workaround unfortunately.
I have been having an issue on several computers lately where IE8 will not display a webpage. As soon as I close the troubleshooter the page loads right up. This has happened on new computers and old. I just installed windows 7 professional on a brand new computer and IE8 is having the same exact problems. What does this mean?
View 12 Replies View RelatedI have a mid 2010 iMac 27" 3.2Ghz i3 4GB ram 1TB hard drive space ATI HD4870.Running windows 7 x64 and OS X 10.6.6..I am using a wireless internet source from nearby, and the connection works great on OS X when I boot into windows the internet is completely un-responisive and when it does work its slower then glass (for those of you who don't know glass is technically a liquid)
View 5 Replies View RelatedMy computer is on the internet, which is working fine - except that if I go to the Network and Sharing Center, it says that I am not connected to a network. The major problem this is causing is the fact that I can't use Windows Media Center to stream anything over to my Xbox, because it says that I'm not connected to a network: Running the troubleshooter does nothing.So far I've: Uninstalled drivers, and reinstalled from my Motherboard's disc which was working fine inititallyUninstalled Apple's Bonjour applicationDisabled and re-enabled the network adapter multiple timesRan ROUTE DELETE 0.0.0.0 for the hell of it because I read that somewhereNothing has worked.
View 9 Replies View RelatedI've been using the Windows 7 Ultimate release candidate as an evaluation copy for a while now with no problems. I have an ATI radeon mobility X1600 graphics card in my laptop and I'm using an external monitor through my laptop's DVI port. I bought a product key for Windows 7 professional and therefore had to reinstall that version because I'm using Ultimate as the evaluation copy. I have each version on its own partition so I can switch back and forth between the two.
The problem is that the newly installed windows professional copy will not recognize my ATI graphics card and I can't use my external monitor. It has the standard windows VGA adapter drivers installed. I've installed and run the ATI file i downloaded off their site, '9-9_beta_win7_32_dd_CC', and this accomplishes nothing. I looked in device manager on the working ultimate version and the card is installed correctly so I copied all of the drivers and files it says its using and then tried to update the driver for the standard windows VGA adapter and it says it can't find any better drivers than the current ones.
I remember initially having this same problem when I first installed the Windows 7 Ultimate RC several months ago but I have no clue how I was able to get it to work... Any ideas?
All of a sudden, I can no longer print to pdf from IE8 (windows 7), the windows flashes for two seconds as though it were starting and then nothing happens, no pdf is created, etc. I've thought about reinstalling Acrobat but am afraid it will also start to fail from MS office.
View 2 Replies View RelatedNew gaming PC project:
Asus Rampage Extreme IV
I7 3960x
32gb Gskill 2133 mhz
Sound Blaster Recon 3D
2 Corsair Force GT 60gb sata3
2 Corsair Force GT 120gb sata3
Windows 7 home 64bit w/anytime upgrade to Professional (Didn't know about the 16gb ram cap...)
9800 GTX video (ran outta money...)
The issue I'm having is everything seems fine till the first reboot, then I get errors about some random important file is missing or corrupt, please insert your DVD and repair windows or whatever the hell it says. The specified missing file is always different each install attempt (I have made about 30ish attemps so far in every drive configuration I could think of). Once it even said 'a system file' is missing or corrupt with no file specified. One attempt (120gb drives in raid0 with no other drives attached) did make it to the Windows 7 load screen, but then windows encountered an 'unknown error' and had to close while finalizing.
What I wanted to do was raid0 the 60's for boot and raid0 the 120's for games, but I can't do that because while this mb has 4 sata3 ports, only 2 ports are raid capable (Intel C600 controller) as the other 2 are on an ASMedia controller. As that is the least of my problems and only my fault for making assumptions before I buy crap, what I thought to do instead was install win on one 60 on the ASMedia sata3 controller in AHCI with OPROM enabled, use the other 60 for task file, and raid0 the 120's for game installs. At first I thought the problem was bad drives because it installs fine on my old HDDs, but all 4 drives DOA seems unlikely so I figure I'm doing something wrong.
There are multiple posts about issues with these drives on Corsair forums, however none of their solutions provide a fix. Currently I have Windows 7 installed on 2 seagate 160gb HDD's in raid0 on sata2 with both 60's on sata3 ASMedia and both 120's in raid0 on sata3 Intel C600 controller. I am convinced there is no problem with any drive as I have multiple games installed on the raid0 with task file on 1 60 and the other 60 is dedicated to ready boost. Honestly I have no idea what ready boost does, and with 32gb of ram it probably doesnt do much - but I can't think of anything else to do with the drive to see if I get any system hangs or issues.
After a week in this configuration I have had no issues whatsoever. I have run error checking from the properties tab in win for all drives, as well as chkdsk from command prompt and the disk checking utility in partedmagic which all came back no problems found. ATTO benchmark shows the the 60's around 475mb/s read/write and the 120's in raid0 are about 1100mb/s read/write. These SSD's are lightning fast. My HDD's are not - 275mb/s read/write in raid0 . Must needs faster boot.
I have tried installing win on each drive individually on each controller twice (16 attempts) and tried each set in raid0 a few times. Every attempt started out with a partition deletion and a secure erase using partedmagic AND sata3 controller in AHCI mode per Corsair forums. I have done Corsair's 1.3.3 firmware update to each drive. I have tried letting windows partition/format each drive during the install. I tried booting from my HDD's, then creating partition tables, allocating sapce, and formatting the SSD's from disk management, then installing win on the drives already setup. And a few other various things in different orders.
My steps for the 1 result that yeilded and actual Windows 7 loading screen after 1st reboot:
- 2 120gb ssd's on Intel C600 sata3
- Enter bios - change sata from raid to ahci - exit
-Boot with partedmagic bootdisk - deleted partitions both drives - system suspend for drive reset - secure erase both drives - shutdown
- Plugged in 2 160gb hdd to sata2
- Enter bios - change sata from ahci to raid - exit
- Enter raid setup utility - create raid0 on 120gb ssd's with 32kb strip - exit
- Boot win from hdd - create MBR partition table, allocate all avail space, format NTFS (not quick format) - shutdown
- Unplugged 2 160gb hdd
- Boot from Windows 7 install disk - install to SSD raid volume - 1st reboot yeilds load screen then 'unknown error', but I guess it was some-what better than windows failed to start due to whatever random file missing or corrupt.
I recently ran into a problem. I cannot access any website through any browsers (Internet Explorer 64-bit works fine). In Google Chrome I get this:Error 137 (net::ERR_NAME_RESOLUTION_FAILED): Unknown errorAll my other Internet-reliant programs (Steam, XFire, SKype, etc.) work fine, with the exception of MBAM (can't connect in order to update definitions).I've ran TDSS Killer (found nothing), MBAM (found a few things, removed all), and Microsoft Security Scanner (found a few things, removed all).
View 11 Replies View RelatedWhen using the installed windows 7 my laptop keeps crashing no matter what web browser I'm using, what antivirus I use etc. The 'not responding' thing always bugging me plus occasional BSoD and regular freezes. I tried clean installing using windows CD but that didn't solve my issue.
View 1 Replies View Relatedi have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
1 The following boot-start or system-start driver(s) failed to load: cdrom
2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA
3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.
4 Audit events have been dropped by the transport. 0
5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP
6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER
7 The previous system shutdown at 07:28:23 on 09/03/2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:
- changing Power options, restored "defaults", changed hybrid sleep on/off
- BIOS is useless as there's no power management options, is a netbook.
- roll back / reinstalled Nvidia video drivers
- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...
I have a two HDD setup with a newer Western Digital Caviar Black 500GB as my secondary drive. It stores all my bigger files such as video games, videos, and so on. Whenever I try to optimize that hard drive using Disk Cleanup or Disk Defragmenter, it doesn't seem to execute the program. The hard drive is running and DC and DD have it on their list but when I use DC it would just come up with 0 mb to clean every time and DD always run a lot faster than the smaller primary drive which is also Western Digital. Is there somewhere in Windows 7 configuration that I need to change to enable the disk to be optimized?
View 4 Replies View RelatedMachine specs:
Antec 900 ATX case
Tyan Tiger K8WE S2877-G2NR mobo
Dual AMD Opteron 275 dual-core @ 2.2GHz
3 GB Ram, 2x BFG Nvidia GeForce 9600GT
in SLI config, 2x Seagate 750GB 7200RPM SATA HDD's Thermaltake Black Window 850 W power. LG CD/DVD/RW Creative Sound Blaster SE (model SB0570)
Dual Boot
OS Drive 1 Windows 7 Ultimate 32 bit
OS Drive 2 Windows 7 Ultimate 64 bit
Problem: Sound card works fine in 32 bit, but is unrecognized in 64 bit. All other systems nominal. Solutions tried to date.
(1) Sound card un and re-installed.
(2) SB solution SID 82669 (force detection through LGPE, D/L and install new drivers) Failed.
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
View 5 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
My Pinacle Studio 14 voice over recording stopped working. Skype works fine.
View 2 Replies View RelatedMy A200 has been upgraded to 4GB RAM, and Win7, worked fine for a while, then started randomly freezing with weird screen stuff (video not displaying properly). Power off only worked. Much frustration and removal of progs later, tried on safe mode - works fine. Safe mode with networking - works fine. Can plug it in (surefire way to get it to fault normally) and in safe mode it works fine, in normal mode, immediate fault.
Thought perhaps a horrible malware, did clean install from disc of win7, no change (except now, coz I deleted all the Toshiba drivers, the dvd drive is noisly lol). Can't load progs to run the damned thing properly because it won't run in normal mode, only safe mode. Tried formatting the hdd, but it won't let me (partitions) which I thought were reformatted during a clean install anyway?
Haven't tried changing the charger yet, because it works fine in safe mode, so I thought probably a software issue? Have tried minimal or "clean" normal boots, freezes immediately.
I recently upgraded my mothers computer to a dual core with Windows 7. She loves to play games and her favorite is Video Bingo in Facebook (Mesmo games). Since this upgrade bingo will freeze up after the game is completed prior to awarding tokens and asking if you would like to play another game. So far I have tried Windows Explorer, Google Chrome and Firefox web browsers, cleared the cache for both the browsers and the computers DNS cache. Additionally, I have disabled tcp autotuning, removed remote differential compression, and removed IPv6. Also, I have upgraded the graphics driver. All Windows 7 upgrades are current, Adobe flash and shock wave in addition to all adobe programs are the most recent. The computer is a Dell Optiplex 740, AMD Athlon 64x2@2.2ghz, 4GB PC6400 800Mhz ram. There are other Mesmo games that are not responding correctly also. Every other App seems to work correctly and other than these issues this computer appears to work flawlessly. Unfortunately, these are my mothers favorite games. This problem doesn't exist with Windows XP.
View 9 Replies View RelatedEvery time I am playing a game,on fb, ie keeps popping up with secure site [ ] yes [ ] no & no matter which box I click it shuts my game down. even if i [x] out it shuts me down.
View 1 Replies View RelatedEvery time I am playing a game, on fb, Ie keeps popping up with secure site [ ] yes [ ] no & no matter which box I click it shuts my game down. Even if I [x] out it shuts me down.
View 5 Replies View RelatedI've disabled my games how do i enable it. cant play facebook games anymore or any game for that matter.
View 2 Replies View RelatedI want to know why my computer shuts down when I play games on facebook?
View 1 Replies View RelatedBattlefield 3 crashes regulary with BSOD after playing for a while.Checked CPU Temps with CoreTemp - around 38C?Checked GPU with MSI Afterburner - around 60C.Windows 7 Home 64-bit / Asus P5QLD Pro / 4GB RAM / Gefore 560 Ti / SB 5.1 VX.
View 1 Replies View Relatedso i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
Yesterday when I got home I could not get my headset working on my PC. It's a USB headset (Tritton AX720) but it works perfectly on my Xbox 360. There is sound coming from the headset but it is really quiet. My speakers to my computer work fine, it's just when I plug the headset in I'm not getting sound. I was working on it for about an hour last night and I can't figure out what is wrong with it. So far I've tried to make it my default audio device, I did a system restore to a few days ago, and messed with the setting a little bit. This headset has worked on my PC for about 6-8 months up until yesterday. By the way my audio for my computer is still working perfectly. It is only when I plug my headset in that it isn't working properly. I'm completely lost on what is wrong.
View 1 Replies View Relatedolder apps and games work well no lag on windows xp but in windows 7 it works but lags even if i have a laptop i5 processor, ddr32gb ram, 2gb videocard when i saw in task manager the app.exe im using it has 25% cpu usage i have 2cores/4 threads the app and game im running is nfs 2 se simple trainer/tweak for my games
^this doesn't lag on xp, is there a way to fix this on windows 7
The autostart function is not working properly. When introduced a CD Rom into the drive, it has all the autostart functions for movies, pics, documents, but instead of starting the games directly, It allways ask me to open the file, movies or pics, but the game never starts automatically as It used to do in the past Windows versions, and in Windows 7 BEFORE SP1. It's imposible to play games that require the insertion of the disc into the CD Rom Drive, for the same reason.Im running Windows 7 Ultimate x64 and have a LG Super Multi RwDVD +R DL Light scribe multirecorder.
View 1 Replies View Relatedok so i have a problem thats been driving me insane. my toshiba F50 was working totally fine until suddenly during games my GPU started overheating quickly during games (Was not doing this before) i noticed that my fan didnt seem to be spinning as fast as before. i cleaned it still no avail, tried riva tuner and ntune and all of that jazz and all of them have the fan control options greyed out? (cannot use them)i noticed that when i start the laptop the POST test on the fans guns the fan to 100% speed so i know its capable of doing it. it seems like the fan doesnt know to speed up when it gets hot and it keeps shutting my system down and i reallllly dont feel like damaging my GPU. i tried rolling back my drivers and running the latest drivers.
View 8 Replies View RelatedHow to Restore the Default Games in Windows 7 Games Explorer Folder ?
View 0 Replies View Relatedi cannot log on to facebook. what should i do?
View 1 Replies View Relatedwhy we can not use facebook
View 3 Replies View Related