All of a sudden, I can no longer print to pdf from IE8 (windows 7), the windows flashes for two seconds as though it were starting and then nothing happens, no pdf is created, etc. I've thought about reinstalling Acrobat but am afraid it will also start to fail from MS office.
View 2 RepliesI have a number of users that I support that cannot open a PDF file downloaded from a training website (external website, not intranet). Using IE8 they get a flash of status bar activity and then nothing. On my computer with IE9 I have no issues opening them at all. I've changed all the security, privacy, content and advanced settings to match what I see in my internet options, but that hasn't helped.
I can't figure out what has changed between IE8 and IE9 that causes this. Adobe Reader 9 is installed on all machines. Firefox 10.0.2 will open the files also, but has issues with some of our propriety software so we can't use it as a workaround unfortunately.
pc works just fine until i go into Facebook games. The screen then fades and freezes. This is with all games.
View 3 Replies View RelatedI have been having an issue on several computers lately where IE8 will not display a webpage. As soon as I close the troubleshooter the page loads right up. This has happened on new computers and old. I just installed windows 7 professional on a brand new computer and IE8 is having the same exact problems. What does this mean?
View 12 Replies View RelatedI have a mid 2010 iMac 27" 3.2Ghz i3 4GB ram 1TB hard drive space ATI HD4870.Running windows 7 x64 and OS X 10.6.6..I am using a wireless internet source from nearby, and the connection works great on OS X when I boot into windows the internet is completely un-responisive and when it does work its slower then glass (for those of you who don't know glass is technically a liquid)
View 5 Replies View RelatedMy computer is on the internet, which is working fine - except that if I go to the Network and Sharing Center, it says that I am not connected to a network. The major problem this is causing is the fact that I can't use Windows Media Center to stream anything over to my Xbox, because it says that I'm not connected to a network: Running the troubleshooter does nothing.So far I've: Uninstalled drivers, and reinstalled from my Motherboard's disc which was working fine inititallyUninstalled Apple's Bonjour applicationDisabled and re-enabled the network adapter multiple timesRan ROUTE DELETE 0.0.0.0 for the hell of it because I read that somewhereNothing has worked.
View 9 Replies View RelatedI've been using the Windows 7 Ultimate release candidate as an evaluation copy for a while now with no problems. I have an ATI radeon mobility X1600 graphics card in my laptop and I'm using an external monitor through my laptop's DVI port. I bought a product key for Windows 7 professional and therefore had to reinstall that version because I'm using Ultimate as the evaluation copy. I have each version on its own partition so I can switch back and forth between the two.
The problem is that the newly installed windows professional copy will not recognize my ATI graphics card and I can't use my external monitor. It has the standard windows VGA adapter drivers installed. I've installed and run the ATI file i downloaded off their site, '9-9_beta_win7_32_dd_CC', and this accomplishes nothing. I looked in device manager on the working ultimate version and the card is installed correctly so I copied all of the drivers and files it says its using and then tried to update the driver for the standard windows VGA adapter and it says it can't find any better drivers than the current ones.
I remember initially having this same problem when I first installed the Windows 7 Ultimate RC several months ago but I have no clue how I was able to get it to work... Any ideas?
New gaming PC project:
Asus Rampage Extreme IV
I7 3960x
32gb Gskill 2133 mhz
Sound Blaster Recon 3D
2 Corsair Force GT 60gb sata3
2 Corsair Force GT 120gb sata3
Windows 7 home 64bit w/anytime upgrade to Professional (Didn't know about the 16gb ram cap...)
9800 GTX video (ran outta money...)
The issue I'm having is everything seems fine till the first reboot, then I get errors about some random important file is missing or corrupt, please insert your DVD and repair windows or whatever the hell it says. The specified missing file is always different each install attempt (I have made about 30ish attemps so far in every drive configuration I could think of). Once it even said 'a system file' is missing or corrupt with no file specified. One attempt (120gb drives in raid0 with no other drives attached) did make it to the Windows 7 load screen, but then windows encountered an 'unknown error' and had to close while finalizing.
What I wanted to do was raid0 the 60's for boot and raid0 the 120's for games, but I can't do that because while this mb has 4 sata3 ports, only 2 ports are raid capable (Intel C600 controller) as the other 2 are on an ASMedia controller. As that is the least of my problems and only my fault for making assumptions before I buy crap, what I thought to do instead was install win on one 60 on the ASMedia sata3 controller in AHCI with OPROM enabled, use the other 60 for task file, and raid0 the 120's for game installs. At first I thought the problem was bad drives because it installs fine on my old HDDs, but all 4 drives DOA seems unlikely so I figure I'm doing something wrong.
There are multiple posts about issues with these drives on Corsair forums, however none of their solutions provide a fix. Currently I have Windows 7 installed on 2 seagate 160gb HDD's in raid0 on sata2 with both 60's on sata3 ASMedia and both 120's in raid0 on sata3 Intel C600 controller. I am convinced there is no problem with any drive as I have multiple games installed on the raid0 with task file on 1 60 and the other 60 is dedicated to ready boost. Honestly I have no idea what ready boost does, and with 32gb of ram it probably doesnt do much - but I can't think of anything else to do with the drive to see if I get any system hangs or issues.
After a week in this configuration I have had no issues whatsoever. I have run error checking from the properties tab in win for all drives, as well as chkdsk from command prompt and the disk checking utility in partedmagic which all came back no problems found. ATTO benchmark shows the the 60's around 475mb/s read/write and the 120's in raid0 are about 1100mb/s read/write. These SSD's are lightning fast. My HDD's are not - 275mb/s read/write in raid0 . Must needs faster boot.
I have tried installing win on each drive individually on each controller twice (16 attempts) and tried each set in raid0 a few times. Every attempt started out with a partition deletion and a secure erase using partedmagic AND sata3 controller in AHCI mode per Corsair forums. I have done Corsair's 1.3.3 firmware update to each drive. I have tried letting windows partition/format each drive during the install. I tried booting from my HDD's, then creating partition tables, allocating sapce, and formatting the SSD's from disk management, then installing win on the drives already setup. And a few other various things in different orders.
My steps for the 1 result that yeilded and actual Windows 7 loading screen after 1st reboot:
- 2 120gb ssd's on Intel C600 sata3
- Enter bios - change sata from raid to ahci - exit
-Boot with partedmagic bootdisk - deleted partitions both drives - system suspend for drive reset - secure erase both drives - shutdown
- Plugged in 2 160gb hdd to sata2
- Enter bios - change sata from ahci to raid - exit
- Enter raid setup utility - create raid0 on 120gb ssd's with 32kb strip - exit
- Boot win from hdd - create MBR partition table, allocate all avail space, format NTFS (not quick format) - shutdown
- Unplugged 2 160gb hdd
- Boot from Windows 7 install disk - install to SSD raid volume - 1st reboot yeilds load screen then 'unknown error', but I guess it was some-what better than windows failed to start due to whatever random file missing or corrupt.
I recently ran into a problem. I cannot access any website through any browsers (Internet Explorer 64-bit works fine). In Google Chrome I get this:Error 137 (net::ERR_NAME_RESOLUTION_FAILED): Unknown errorAll my other Internet-reliant programs (Steam, XFire, SKype, etc.) work fine, with the exception of MBAM (can't connect in order to update definitions).I've ran TDSS Killer (found nothing), MBAM (found a few things, removed all), and Microsoft Security Scanner (found a few things, removed all).
View 11 Replies View RelatedWhen using the installed windows 7 my laptop keeps crashing no matter what web browser I'm using, what antivirus I use etc. The 'not responding' thing always bugging me plus occasional BSoD and regular freezes. I tried clean installing using windows CD but that didn't solve my issue.
View 1 Replies View Relatedi have a bit of "weird" problem, that is, my netbook cannot resume properly from sleep BUT hybernation works fine. and the strange thing is, it was a while, lets say couple of months i didnt use sleep mode which used to work perfectly, all latest security updates have been done, etc etc...the computer goes properly into standby (hard disk saves files to memory?) and then the standby led blinks correctly. when i hit any key, the hard drive loads something for about 3-4 seconds, then Caps lock and Scroll Lock lights on the keyboard turn on (as if it was the check when you boot the pc) and then they stay stuck on and everything is idle, i have tried to leave the computer there 5 minutes, nothing happened, those 2 lights are stuck on... to get the pc back on i have to long press the power button so forcing a reset, when comp boots, it will detect something went wrong asking me what i want to do, i choose "boot normally" and is back up, this is what i have in the admin error log if that can give any hint, in referse order (newer first): 0 Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x22224330DF61. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
1 The following boot-start or system-start driver(s) failed to load: cdrom
2 Engine and VDF could not be loaded from installation directory. Engine and VDF will be loaded from a backup copy. >> AVIRA
3 The print spooler cannot start because the PrinterBusEnumerator could not start. Error code 0x490. This can occur because of system instability or a lack of system resources.
4 Audit events have been dropped by the transport. 0
5 The driver DriverWUDFRd failed to load for the device USBVID_147E&PID_10005&9195cc&1&1. Warning, Kernel PnP
6 The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. CRITICAL, KERNEL POWER
7 The previous system shutdown at 07:28:23 on 09/03/2012 was unexpected.so perhaps keyboard problem? see below: the ONLY relevant hardware change i did recently was to swap keyboard with an OEM one as the stock one was kaput (though i still have it for a test which i have to do this evening). i am talking about the very onboard keyboard, not an external one, i purchased a OEM compatible one that works perfectly but to be precise is not the original.on startup i have avira, battery care (beta version) and the wireless utility, always had them.i have tried the following which haven'ty made ANY difference:
- changing Power options, restored "defaults", changed hybrid sleep on/off
- BIOS is useless as there's no power management options, is a netbook.
- roll back / reinstalled Nvidia video drivers
- my netbook has 2 onboard video cards, an nvidia and an integrated intel, i tested both configurations but the problem is IDENTICAL therefore i would skip the "video card problem" if that makes sense...
I have a two HDD setup with a newer Western Digital Caviar Black 500GB as my secondary drive. It stores all my bigger files such as video games, videos, and so on. Whenever I try to optimize that hard drive using Disk Cleanup or Disk Defragmenter, it doesn't seem to execute the program. The hard drive is running and DC and DD have it on their list but when I use DC it would just come up with 0 mb to clean every time and DD always run a lot faster than the smaller primary drive which is also Western Digital. Is there somewhere in Windows 7 configuration that I need to change to enable the disk to be optimized?
View 4 Replies View RelatedMachine specs:
Antec 900 ATX case
Tyan Tiger K8WE S2877-G2NR mobo
Dual AMD Opteron 275 dual-core @ 2.2GHz
3 GB Ram, 2x BFG Nvidia GeForce 9600GT
in SLI config, 2x Seagate 750GB 7200RPM SATA HDD's Thermaltake Black Window 850 W power. LG CD/DVD/RW Creative Sound Blaster SE (model SB0570)
Dual Boot
OS Drive 1 Windows 7 Ultimate 32 bit
OS Drive 2 Windows 7 Ultimate 64 bit
Problem: Sound card works fine in 32 bit, but is unrecognized in 64 bit. All other systems nominal. Solutions tried to date.
(1) Sound card un and re-installed.
(2) SB solution SID 82669 (force detection through LGPE, D/L and install new drivers) Failed.
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
View 5 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
My Pinacle Studio 14 voice over recording stopped working. Skype works fine.
View 2 Replies View RelatedMy A200 has been upgraded to 4GB RAM, and Win7, worked fine for a while, then started randomly freezing with weird screen stuff (video not displaying properly). Power off only worked. Much frustration and removal of progs later, tried on safe mode - works fine. Safe mode with networking - works fine. Can plug it in (surefire way to get it to fault normally) and in safe mode it works fine, in normal mode, immediate fault.
Thought perhaps a horrible malware, did clean install from disc of win7, no change (except now, coz I deleted all the Toshiba drivers, the dvd drive is noisly lol). Can't load progs to run the damned thing properly because it won't run in normal mode, only safe mode. Tried formatting the hdd, but it won't let me (partitions) which I thought were reformatted during a clean install anyway?
Haven't tried changing the charger yet, because it works fine in safe mode, so I thought probably a software issue? Have tried minimal or "clean" normal boots, freezes immediately.
I have installed an HP Printer and it's printing fine with the exception of MS docs. I can bring PDF files, web pages. I've printed an ebay purchase and and an Amazon purchase. However, I am unable to print Word or Works doc.
View 5 Replies View Relatedso i finally decided to install Windows 7 x86 - everything went well - put all the standard stuff on there etc - i rebooted many times because of installations and updates
on my last reboot it just got stock in the bios screen (verifying dmi pool data..success! etc)
so i rebooted, same thing, took the disc out, same thing - turned off boot devices same thing
tried to use window's useless repair tools (whatever happened to repair install?) which didn't help - so i decided to format and reinstall - then it says it was unable to do that (partition error or something)
the annoying this is...is that this EXACT..i mean EXACT same thing happened when i installed vista sp1 from scratch - this happened - and to fix it i had to leave my pc open overnight with the hard drive cables all unplugged..in the morning with my fingers crossed i tried the installation again - and it worked.
my d: always disappears (single hard disk sata 233gig (250)) - sometimes it'll vanish from my computer and stuff - but this can't be the problem because the d: is a single drive on its own - my c: is a25gig partition from my e: - so it's completely unrelated.
does it matter how i replug the sata cables (2 of them) into the mother board? - they're both being recognised anyway
this is really annoying though - mostly because there isn't really an explanation - and because this random stuff always happens to my pc! - is it my hard drive because that's the only thing that would half- make sense
Yesterday when I got home I could not get my headset working on my PC. It's a USB headset (Tritton AX720) but it works perfectly on my Xbox 360. There is sound coming from the headset but it is really quiet. My speakers to my computer work fine, it's just when I plug the headset in I'm not getting sound. I was working on it for about an hour last night and I can't figure out what is wrong with it. So far I've tried to make it my default audio device, I did a system restore to a few days ago, and messed with the setting a little bit. This headset has worked on my PC for about 6-8 months up until yesterday. By the way my audio for my computer is still working perfectly. It is only when I plug my headset in that it isn't working properly. I'm completely lost on what is wrong.
View 1 Replies View RelatedThis may be difficult to troubleshoot because I have very few details about the computer in question. A friend called me because I am fairly good with basic computer problems. I'm not sure of the hardware specs, but it's a 2010 or 2011 model PC with Windows 7 installed. They did a Windows Update, and let it update just fine - they did not restart or shut down at all during the update. Once the update completed however, they can't open anything up.
Every time they try opening a program, they get an error message. Also, he mentioned that at first after the update, it wouldn't even boot up. He would get a message saying that he needs to restore to system defaults. Somehow, they got the computer to boot but it wont open any programs. How do you reset a Windows 7 computer to factory settings?
Using Windows 7 64bit with Office 2010
Using the Office suite while logged in as Administrator then Office works fine.
If I reduce myself to power user then the start menu shows as if Office 2010 was not fully installed and unable to use any Office application.
My computer runs like grease lightning in safe mode, and my internet speeds are marvellous also, but alas when not in safe mode I have on quite a few occasions lately had my Windows freeze, my Windows Live Mail also freeze. I will define freeze, everything just does not work, my browser Firefox/Google, none of my loaded programs.
I have to leave the computer for about 10 minutes, and then it is perfect all day!, so I am guessing a program is causing the dilemma, but which one? I have about 60 applications running and I haven't loaded a new one in about 6 months. Is there a program I can purchase/download that would seek out the rogue program if indeed it is a rogue program.
After the latest windows updates (9-22-12), now I cannot launch any program, including outlook, IE, norton or quicken. I can bring up an explorer window, copy and move files, and use the search funtion. I am out of ideas. System restore is useless.
View 18 Replies View RelatedWhen I click on that it takes me to the same box again. At the top of the box it says "SSVagent.exe" I googled that and it seems to be some type of malware?? I ran a full scan using my Kaspersky Security software and nothing was found. I also cannot print to my network printer from the 2 laptops that are connected to it or from the main desktop. I tried using system restore but although it goes back to a previous day, the problem still exists. The only way I can run any program is if I right click and choose "Run as administrator." Then if I'm on internet explorer, for example, after I clicked run as administrator, every time I want to change websites or screens, I get that pop-up box asking me to choose a program. Once I close that box out then the webpage loads.
View 9 Replies View RelatedA colleague of mine using the 64bit version of Windows 7 Enterprise has been having this problem for the past day or so. No matter what program he's using, as soon as he clicks print, the program stops responding. This even happens if you try to print a test page - Windows Explorer stops responding. It's not printer specific, since this happens before you have the option to select a printer (and he has several, one local printer and a few network printers). I've tried running the troubleshooting tool, but all that does is restart the print spooler, which doesn't stop the problem.
View 7 Replies View RelatedIs there a way to add a link to open Microsoft Office OneNote 2007 to my context menu on Windows 7 64-bit operating system? I am also looking to add Microsoft Word 2007, and Microsoft Outlook 2007 to that right-click drop down menu too. I would assume, I may be wrong, but would these be conducted or setup the same way like OneNote is? I use these applications a lot and it would make things a little quicker and easier.
I am looking to have it incorporated into the context menu using/running a script with a simple clean code (please no hex code) that I can run to make the quick accurate changes. I am also looking to add a small icon next for each Office program that is the actual program representation in the context menu as well. Please do not provide me the manual method steps to perform this function to the registry. Please provide a completed REG file attached to your response or a Windows System Registry script I can therefore make my own REG file from. I am not interested in a third party program either that would perform this action as well.
Windows 7 was not functioning well, so it was re-installed using restore option, then MS Office 2007 was installed, but then on right clicking the desktop, in the new option ms office 2007 programs are not visible, but folder is visible.... whereas those programs are visible in start menu.
View 2 Replies View RelatedI've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View Related(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies View RelatedMy HP 6500 all in one will print test pages but will not print from my computer. It worked fine up until a week ago?
View 2 Replies View Related