I have been having a problem with my USB wireless network receiver, netgear dualband wireless, the problem appears when I've had the computer in sleep. When I wake it back up, it will fail to install and I need to either take it in or out, or restart the computer.
View 1 RepliesI am using Windows 7 Home edition. I have found that the turn off monitor and sleep functions do not work.When I set these from edit plan settings and save changes it does not do anything. I have tried restarting my computer to see if this would work but to no avail. I have no programs on the task bar which might be keeping the computer awake
View 3 Replies View RelatedThe printer works fine after the PC is rebooted or just turned on, but as soon as it returns from sleep I cannot print to the USB printer. I have the port set to "do not turn this device off" but none of those power settings for the USB hubs seem to work.
I had to use the Troubleshooter to allow the USB mouse/Keyboard to reinitialize after sleep, but the troubleshooter does not apply the same fix for the USP printer. Is there some way to do this manually?
I know MS is trying to remove options and configurations for the average PC user, but I've been working in IT for years now and there are a bunch of things that I would at least have the option of turning on/off but some features don't exist in Windows 7 (like UP button in My Computer).
Anyone have an idea how to make the printer work from sleep without having to unplug and re-plug the USB cord in? It's a PITA.
I have, in my Control Panel, timers set for both Sleep mode and Hibernation modes (Advanced settings). However, neither one of them ever functions.
View 5 Replies View RelatedI've bough a Dell Inspiron 1564 with Windows 7 home premium x64 last month and everything was fine until a few days ago, when sleep mode stopped working. When I close my lid and open it up after some time there are 2 things that might happen:
1. The screen is just black, all the buttons are lit, I hear the fan, but no reaction at all. So I just forcibly turn off and turn it on again.
2. After opening the lid, nothing happens, when I try to turn it on, it loads up, but informs me that windows has not shut down properly last time (or something like that).
I have a weird issue with my wireless adapters. I will put my computer to sleep and then resume my work a few hours later, when the computer wakes up both wireless adapters are disabled and I have to go into adapter settings to re-enable them. My adapters are a netgear wna1100 usb adapter and an azio pci card adapter.
View 1 Replies View RelatedI built this Windows 7 machine last year on an msi p55-gd80 motherboard with an i5-750 cpu. It would sleep fine and come out of sleep fine. Then I upgraded to a gigabyte Z68MA-D2H-B3 motherboard with an i7-2600k cpu. In doing the upgrade, all I did was boot the new hardware using the old hard drive, and then ran the new motherboard install dvd. Everything worked from the get go just as it had on the old machine, with one exception. Now, when coming out of sleep, I usually get a bsod. I assume this is driver related, but am not sure how to proceed as device manager looks fine and apart from coming out of sleep, the machine is perfect.
View 9 Replies View RelatedA couple days ago, my keyboard and touchpad mouse stopped working. I thought it was a hardware issue and ordered a replacement keyboard. As for the touchpad, I'm just using a wireless mouse. I replaced the keyboard a couple days later with the new one, and when I turned on my laptop, it works again, but when I put my laptop to sleep and wake it up, I hit enter, and then it stops working. I cannot type anything until I restart my computer. I figured it has to do something with the drivers, but I'm not too sure. Here is my computer specs:
Product: HP Pavilion dv9700
Model: dv9925nr
Windows 7 home premium 64bit
I've gone to the HP website to get the drivers, but they do not support windows 7 for my computer.
I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)
I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?
So I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
View 3 Replies View RelatedI just got a new HP desktop, and a wireless router to put into the USB port. It worked perfectly after initial install with the drivers, but after coming back from sleep, it does not see the adapter, and I have to re install the drivers to get it to work. If I shut down the system, then turn it back on, the adapter works perfectly.
View 6 Replies View RelatedEvery time I close the lid, the computer goes into sleep mode. When I open my lid, it goes onto the log in screen. Once I log in, it recconects to my router. It says it connects to the router, but doesn't connect to the internet. I then restarted my wireless card, due to an on/off button on the side my of laptop, and once restarted, it connected to my router and still, no internet.
View 2 Replies View RelatedI had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
I have read many threads on this, but I cant seem to get my laptop to wake using the wireless kboard/mouse. I have a HP pavilion dv4 with windows 7 x32, and a logitech LX710 Kboard/mouse. I am beginning to think that I will not be able to wake on this laptopAllow this device to turn on computer is greyed out in device manager. I have accessed the bios, but did not see anything that looked like it pertained to this issue. I am far from a computer expert
View 3 Replies View RelatedMy adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy. I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. In device manager, there is no wireless card, even after showing hidden devices. Adding a device does not discover it. Installing the network card driver and software does nothing to detect it. Windows thinks there is no device connected. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have cpu fan that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1. Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting I'm missing because I'm sure it was working with my last set of ram.
Windows 7 Ultimate 32bit
I usually let the laptop go to sleep and when i wake the computer, the wireless connection takes about 2 or 3 minutes to reconnect to the network.
I have another win 7 laptop that connects as soon as it wakes up but this one does not do that. The wireless connects fine when i boot the computer but its just after Sleep and wake.
The wireless symbol right bottom of the screen tells me that there are wireless networks in the vicinity but takes some time to connect; I have set my network to connect automatically if it detects it.
This has been going on for ages. Upon a fresh boot, keyboard brightness dimming does not work until I put laptop to sleep. Then, the FN+up/down works fine. I can't remember if this has always been the case, but I know when I first got my laptop, Windows 7 pre-installed, the auto-dimmer was working. Now I am not sure it is (not that I mind, I don't want it on). Now, when I check Advanced Power Options, the "enable auto dimmer" isn't even listed.
I pretty much need to have quick brightness keyboard control due to my light sensitivity. Win+X is annoying to resort to.
Also, when the FN+up/down keys DO work to change the brightness, it says: "Ambient Light Sensor Disabled". (Also also, I checked, and I have no "sensors" installed, so says my system.) Also, my keyboard has a FN+Auto Dimmer key that is the 'left' key in the arrow set, but it doesn't appear to do anything. Or am I completely missing that THIS might be what I need to hit in order to enable keyboard dimming commands? (I haven't tried, but right now, after coming out of Sleep mode, the dimming commands are working and the "auto" option does nothing).
Anyway....
Windows 7 Home Premuim
Dell Latitude E5410
Intel Core i5 m450 2.5ghz
4gb ram
32bit
DirectX 11
Intel HD Graphics 1562mb 60hz
Don't know what else you need to know. I did some searching online and this might be a BIOS setting, but I didn't want to go that route before I talk to someone. (PS, Power Options, as far as I can tell, only lets me manually, on the screen, adjust brightness - it seems to have no control over keyboard adjustment settings).
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
View 2 Replies View RelatedI have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
i just had verizon installed, but can't get my wireless to work. It says i am connected, but wireless won't work. have ciscoWRT160N v2 router
View 2 Replies View Relatedmy wireless router will not work unless i use my ethernet cord
View 1 Replies View RelatedI have been driving myself crazy the past few hours trying to iron out this little issue of mine to no avail. I have a logitech wave wireless kb/m combo on one of my machines that has been working until today. I had moved the computer to another room and in doing so had unplugged everything. I noticed after startup that windows automatic driver update kicked in and as I moved the mouse over to see what it was trying to update my keyboard and mouse both ceased to function. I'm not very savvy in the ways of the driver and at this point in time I only have a wired mouse working on my machine (no wired keyboard available). I should point out that this happened both with the front panel usb ports as well as the on board ports. I have attempted to uninstall and reinstall the pair but it was no good. I thought perhaps I could get around this issue and try to turn off automatic update if i rolled the computer back a day and went into safe mode to work it out but the computer just updates the drivers there as well.
View 3 Replies View RelatedI have microsoft wireless notebook optical mouse and it won't work with windows 7
View 4 Replies View RelatedI just purchased the Kodak ESP C310 wireless printer. I have a Toshiba laptop Windows 7. and I cannot get the disk to printer to download and cannot get any connectivity to printer.
View 3 Replies View Relatedi just bought 3 new laptop computers, 2 hp's and one toshiba, all with windows 7. i set up a wireless network using a netgear wnb2000 router. then i got a canon pixma 560 printer, and when that didn't work an hp c4795 printer. now the hp printers wont work. after spending 6 hours on the phone with hp support, they say its a windows 7 firewall issue that won't let my computers speak to the printer via the router. has anyone had this problem, and more importantly, does anyone know of a solution?
View 13 Replies View RelatedI just had to return my previous windows vista adapter because linksys did not have any drivers for windows 7. What is a good wireless card/adapter that will work with windows 7?
View 4 Replies View RelatedI just finished building a new PC and installed Windows 7 Home Premium 64 bit today.I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.
View 4 Replies View Relatedi can't seem to get my netgear wg111v2 wireless usb to work. I know there are a lot of known problem with this device and windows 7.My problem is that i have configured it correctly i think, but it does not find my network. I'm using windows to find networks and not the netgear program.
View 9 Replies View RelatedI recently re-installed Windows 7 to my new SSD. Now my Wireless Adapter wont work. It's a "Netopia 3D Reach (ter/gusb-n1)" adapter (usb). The drivers that i came across all say that this adapter only goes up to vista, which doesnt make sense because it worked perfectly before i reinstalled my OS. What's wrong? If you find any kind of Window 7 driver
View 4 Replies View RelatedWireless printer had been configured to laptop via netgear router and wired to desktop as well. netgear router crapped out and was replaced with previously owned linksys wireless router; laptop no longer communicates with printer.
View 1 Replies View Related