I am using Windows 7 Home edition. I have found that the turn off monitor and sleep functions do not work.When I set these from edit plan settings and save changes it does not do anything. I have tried restarting my computer to see if this would work but to no avail. I have no programs on the task bar which might be keeping the computer awake
View 3 RepliesWhen my computer running (Windows 7 64 bit) tries to sleep I have found that Windows cannot sleep but it freezes the computer and I get white noise from the speakers. The keyboard or mouse do not work. The only thing I can do is do a restart by pressing the restart button. It hasn't actually blue screened so there is no error report and it is hard to pin down what the error is. A restart error is given in critical errors but no more information than that. I have made sure all of my hardware drivers are completely up to date, checked power settings in the BIOS and turned off various settings in SandyBridge settings. I am at a loss as to what the problem is
View 9 Replies View RelatedI put this on the wrong forum, so here it is on the correct one. Lately the Del Desktop PC with Windows 7 64 bit refuses to come out of sleep when it has been left for a period of hours. When I manually send it to sleep it does so and the mouse and keyboard are set to revive it. It revives as it should do if I move the mouse or hit a key. However whenever I leave it asleep for a long period such as several hours, it refuses to awake and I have to force a reboot with the power button. That produces the black screen which you get after a crash.
View 10 Replies View RelatedI downloaded the RC over the summer to try it out, alongside linux mint. I like it so much that I've decided to abandon the linux distro for now and let Windows 7 take over my whole hard drive. The one thing remaining before falling in love is the lack of standby mode. The sleep function is grayed out in the start menu, so I can't even put it to sleep. This is annoying because I'm using a laptop at school, which I would like to put on standby (instead of hibernating) between classes. This is a 100% fresh install. It was the first thing I tried once the install finished, because I had trouble with the previous Windows 7 install.
View 9 Replies View Relatedi have a samsung np550p5c i kept getting popups of samsung updates and it did my head in so i updated them. they were about 7 updates and the ones i could remember were a bios, sound and graphics update.
when the updates were done it prompted me to restart which i did. when my laptop rebooted i got an error (ill post up a pic of it in a bit) now when i tried to change my brightness using the function keys they dont work
My copy and paste function doesn't work
View 1 Replies View Relatedi have a samsung np550p5c i kept getting popups of samsung updates and it did my head in so i updated them. they were about 7 updates and the ones i could remember were a bios, sound and graphics update. when the updates were done it prompted me to restart which i did. when my laptop rebooted i got an error (ill post up a pic of it in a bit)
View 1 Replies View RelatedAfter recently purchasing a new pc, I have found that my copy and paste function no longer works correctly. When I copy something, half of the time it does not paste, or pastes a random single letter.Is this a problem that could easily be fixed, or could it be something that has infected my pc?
View 4 Replies View RelatedI use the auto scroll feature on my mouse frequently to browse web pages. Before upgrading to win 7 (and ie8) when activated I could scroll using the arrow keys on my keyboard. Since upgrading the arrow keys no longer work. You can only scroll by moving the mouse itself. That function is very important to me as it allowed me to keep my hand off the mouse reducing the aggravation of carpal tunnel syndrome. Any fixes? I am not sure if this is an IE8 problem or win 7 as I only use the function when browsing the web.
View 2 Replies View RelatedI have downloaded a small file that is supposed to make a few changes to the Windows Registry.My problem is that a number of folders are locked, since I upgraded from Windows XP to Windows 7.This little "take ownership" registry file looks fine, there is a tutorial attached, etc. but my problem is that the file does not get merged into the Registry. The file gets opened in Notepad. and that is all..I need help how to let the Merge function work and the opening of the file in Notepad to be avoided.
View 8 Replies View RelatedThe printer works fine after the PC is rebooted or just turned on, but as soon as it returns from sleep I cannot print to the USB printer. I have the port set to "do not turn this device off" but none of those power settings for the USB hubs seem to work.
I had to use the Troubleshooter to allow the USB mouse/Keyboard to reinitialize after sleep, but the troubleshooter does not apply the same fix for the USP printer. Is there some way to do this manually?
I know MS is trying to remove options and configurations for the average PC user, but I've been working in IT for years now and there are a bunch of things that I would at least have the option of turning on/off but some features don't exist in Windows 7 (like UP button in My Computer).
Anyone have an idea how to make the printer work from sleep without having to unplug and re-plug the USB cord in? It's a PITA.
I have been having a problem with my USB wireless network receiver, netgear dualband wireless, the problem appears when I've had the computer in sleep. When I wake it back up, it will fail to install and I need to either take it in or out, or restart the computer.
View 1 Replies View RelatedI have, in my Control Panel, timers set for both Sleep mode and Hibernation modes (Advanced settings). However, neither one of them ever functions.
View 5 Replies View RelatedI've bough a Dell Inspiron 1564 with Windows 7 home premium x64 last month and everything was fine until a few days ago, when sleep mode stopped working. When I close my lid and open it up after some time there are 2 things that might happen:
1. The screen is just black, all the buttons are lit, I hear the fan, but no reaction at all. So I just forcibly turn off and turn it on again.
2. After opening the lid, nothing happens, when I try to turn it on, it loads up, but informs me that windows has not shut down properly last time (or something like that).
I built this Windows 7 machine last year on an msi p55-gd80 motherboard with an i5-750 cpu. It would sleep fine and come out of sleep fine. Then I upgraded to a gigabyte Z68MA-D2H-B3 motherboard with an i7-2600k cpu. In doing the upgrade, all I did was boot the new hardware using the old hard drive, and then ran the new motherboard install dvd. Everything worked from the get go just as it had on the old machine, with one exception. Now, when coming out of sleep, I usually get a bsod. I assume this is driver related, but am not sure how to proceed as device manager looks fine and apart from coming out of sleep, the machine is perfect.
View 9 Replies View RelatedA couple days ago, my keyboard and touchpad mouse stopped working. I thought it was a hardware issue and ordered a replacement keyboard. As for the touchpad, I'm just using a wireless mouse. I replaced the keyboard a couple days later with the new one, and when I turned on my laptop, it works again, but when I put my laptop to sleep and wake it up, I hit enter, and then it stops working. I cannot type anything until I restart my computer. I figured it has to do something with the drivers, but I'm not too sure. Here is my computer specs:
Product: HP Pavilion dv9700
Model: dv9925nr
Windows 7 home premium 64bit
I've gone to the HP website to get the drivers, but they do not support windows 7 for my computer.
I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)
I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?
So I purchased a Razer Naga because I loved the idea of 12 buttons right on the side for my thumb and since I work at home and pretty much just sleep, eat, and work around this computer I only put it on Sleep Mode. But when I moved my mouse around the next day it wouldn't start up. So I unplugged it and took it back got another one. Same problem occurred. Check to see if it would wake the computer from standby and it was checked. So then I moved on to updating the Firmware. Problem still occurred. So I'm wondering is this Razer's fault or perhaps my Motherboard not being power up enough? I do have a 5 year old power supply on my high end computer that's 550 watts due to my 1000 watt dying.
View 3 Replies View RelatedI had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
This has been going on for ages. Upon a fresh boot, keyboard brightness dimming does not work until I put laptop to sleep. Then, the FN+up/down works fine. I can't remember if this has always been the case, but I know when I first got my laptop, Windows 7 pre-installed, the auto-dimmer was working. Now I am not sure it is (not that I mind, I don't want it on). Now, when I check Advanced Power Options, the "enable auto dimmer" isn't even listed.
I pretty much need to have quick brightness keyboard control due to my light sensitivity. Win+X is annoying to resort to.
Also, when the FN+up/down keys DO work to change the brightness, it says: "Ambient Light Sensor Disabled". (Also also, I checked, and I have no "sensors" installed, so says my system.) Also, my keyboard has a FN+Auto Dimmer key that is the 'left' key in the arrow set, but it doesn't appear to do anything. Or am I completely missing that THIS might be what I need to hit in order to enable keyboard dimming commands? (I haven't tried, but right now, after coming out of Sleep mode, the dimming commands are working and the "auto" option does nothing).
Anyway....
Windows 7 Home Premuim
Dell Latitude E5410
Intel Core i5 m450 2.5ghz
4gb ram
32bit
DirectX 11
Intel HD Graphics 1562mb 60hz
Don't know what else you need to know. I did some searching online and this might be a BIOS setting, but I didn't want to go that route before I talk to someone. (PS, Power Options, as far as I can tell, only lets me manually, on the screen, adjust brightness - it seems to have no control over keyboard adjustment settings).
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
View 2 Replies View RelatedI have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
View 7 Replies View RelatedFor some reason, my 'sleep' has stopped working - either from the sleep button, or on the Start button option.
Now it just goes to the user login screen.
Has always worked perefctly until today.
Weird. Any ideas?
I know there are a bunch of sleep problems out there but I couldn't fine one similar to this after doing a forum search. Running Windows 7 Ultimate. Sleep used to work ok but now when I choose sleep from the start menu, the screen blacks out but the computer doesn't actually go to sleep. The fans, activity lights, hdd lights are all still running. If I move the mouse the screen comes back. However, if I just wait for the sleep timer to kick in then the computer does go to sleep (all fans stop running and all lights go out). I'm not sure what caused this. I use my pc as an HTCP and now when I push the power button on the remote the pc does not go to sleep.
View 9 Replies View RelatedI currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
View 2 Replies View RelatedSometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
View 1 Replies View Relateddvd will not function correctly, tired seven dvd player/writers all from working units. it telling me no disc then said checking disc. I have used writeables rewriteables then put them in a unit with xp on it works fine format try again works fine again. I have installed 7 on this machine and it will not work. all the other systems work. JUST will not write or read a DVD HELP!!!!
View 1 Replies View RelatedI am using compaq presario f700 running window 7. my audio and web cam cannot function and have tried many software but failed.
View 1 Replies View Relatedwhen i tried to search for something, I noticed my search bar was gone from my start menu.So I went to google, searching for an answer, and...No go.I looked in my "Windows Features", and it is completely gone.without doing a system restore, or re-installing?
View 6 Replies View Related