Wireless Network Adapter Missing After Resuming S3 From Sleep
Dec 15, 2011
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy. I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. In device manager, there is no wireless card, even after showing hidden devices. Adding a device does not discover it. Installing the network card driver and software does nothing to detect it. Windows thinks there is no device connected. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have cpu fan that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1. Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting I'm missing because I'm sure it was working with my last set of ram.
View 7 Replies
ADVERTISEMENT
Nov 7, 2011
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. Went from Corsair xms3 to G.Skill Ripjaws.
I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy.
I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have case fans that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1.
Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting i'm missing because i'm sure it was working with my last set of ram.
View 2 Replies
View Related
Feb 3, 2012
I just got a new HP desktop, and a wireless router to put into the USB port. It worked perfectly after initial install with the drivers, but after coming back from sleep, it does not see the adapter, and I have to re install the drivers to get it to work. If I shut down the system, then turn it back on, the adapter works perfectly.
View 6 Replies
View Related
Jul 21, 2012
I have an Acer Aspire 5755g running Windows 7 Home premium. It is a few months old and been working fine until the last few weeks where I have had an escalating series of problems. I have got used to closing the screen to send the machine into sleep mode. The new Windows7 sleep seems to work much better than Vista and the resume has always been very quick. Then problems suddenly started.Firstly I occasionally lost wireless connection but the machine found it again (automatically) after a while.Then, the connection dropped out permanently and diagnostics indicated a yellow flag against the Broadcom network adapter in Device manager. At first getting the machine to reset worked. Then I had to reinstall the drivers and that worked. Then disabling/reenabling the adapter was the only way. Then even that did not work.
At one point the computer froze whenever I touched the internet connection icon or the Device Manager item. Then it just froze completely whenever it came out of sleep and I had to do a hard close.At one point I could only restart in safe mode.When this happened I fiddled with all of the things I had tried before (reinstalling etc) but don't really know what worked. One time I just left it over night and in the morning it worked.The Acer help people suggest wiping the hard disk and using their recover utility to set the machine back to factory condition but this will wipe out all of my data and programs I have installed.
View 2 Replies
View Related
Oct 14, 2009
im running windows 7 on my toshiba sattelite L15 S104 and and i cant find a driver for my T60N871 802.11 b/g WLAN wirless adapter. its made by intel but it says foxconn with it also. ive tried toshiba.com and intel.com and still cant find it. does anyone know where i can because i really dont want to go buy a new wirless net work adapter.
View 2 Replies
View Related
Jan 30, 2012
I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.I've attached my mini-dumps files, with the report and some screenshots.
View 1 Replies
View Related
Mar 2, 2012
For months I had Windows 7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Windows 7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.
View 5 Replies
View Related
Aug 29, 2011
I have a AR9285 Wireless Network Adapter installed in my Asus Eee PC. Whenever I wake up the computer from hibernate or sleep, the wireless adapter takes a full minute or more before it will actually connect to a network. Once it is awake and connected, I have no issues, and I have no problems connecting to different networks. So it is working as intended most of the time. When starting up the computer from "off," it is usually fine as well, since the amount of time it takes to fully start up the computer is usually about enough time for the adapter to get going (though not always).I cannot ever "quickly" look something up on the computer, as I have to wait a few minutes in order to be connected to the internet. Has anyone had or heard of this problem? I checked and the driver is up to date.
View 1 Replies
View Related
Sep 30, 2012
A few months later i wanted to upgrade my 32 bit to 64, since i could only use 3,16 GB ram, and my computer has 8GB. So i bought a win 7 home premium 64 bit and installed it. Now i face the same problem, my computer can not detect any wireless network adapter, though i'm 99% sure that my computer has one.
View 6 Replies
View Related
May 21, 2009
since build 7068 I've been facing this problem with this network adapter, will try to explain as good as I can.
Problem as following: Everytime I start the pc after one or two minutes I lost my internet connection and when I try to restart the pc it hangs when shutting pc is showed, forcing me to shut it down only whit the power button.
I have tried to install the vista x64 driver that I have for this network adapter but cannot installed since is onlyfor vista x64, neither in compatibilty mode. After a few research managed to installed it via safe mode. and by now is working good but device manager shows a warning icon and a Cannot start device code 10.
any knows is theres a win 7 update driver?? can I just keep ignoring the code 10 till this bug is fixed??
View 6 Replies
View Related
Aug 11, 2011
I just finished building a new PC and installed Windows 7 Home Premium 64 bit today.I have an ASUS Wireless PCI Express Adapter (PCE-N13 802.11 b/g/n). DSL, with a Linksys rounter. Theres just a red X mark on the taskbar and it won't show any open connections =/. I have several wireless devices that work even outside the range which is about maybe 5 meters away from the router. Its pretty much impossible for me to run a wired connection to my PC and need to have a wireless one since theres many tables/couches/chairs inbetween the router and my new PC.
View 4 Replies
View Related
Dec 9, 2009
I just upgraded my home network with wireless N.
USB wireless adapter is dlink DWA-130C, driver installed properly and windows 7 32bit detected it correctly as DWA-130C on device manager but it could not find any network in my area.
When I do troubleshoot, windows tell me that driver may not installed properly.
FYI it happened with my older G USB adapter too, when I uninstall the driver to update, it installed normally but then it does not detect any network. I have to do system restore to make it work again.
Any idea?
View 1 Replies
View Related
Sep 28, 2011
I cant see available network on my network list. Troubleshooting says "There might be problem with your driver". In device manager, it say"Your driver is working properly"..
View 2 Replies
View Related
Dec 8, 2012
im about to pull my hair out i have win7 x 64 and i can't find the driver that will work for a wusb54g ver.4 if i could get a link that would be awsome and not cisco because theirs does not work
View 25 Replies
View Related
Nov 28, 2009
Can anyone recommend a reliable USB wireless network adapter for a PC running 32-bit Windows 7 Professional?
I am hoping to find one for a 802.11b/g network where the drivers are not flaky and the unit does not randomly disconnect.
The WUSB600N from Cisco/LinkSys does not seem to fit into this category.
View 4 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
View 7 Replies
View Related
May 16, 2012
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
View 3 Replies
View Related
May 29, 2012
I got a new monitor (Dell 2007wfp) and hooked it up to via VGA cable. I ordered a usb cable for it, and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer. When I got back I installed the new cables, plugged everything back in, and the computer wouldn't start. The light on the PSU was flashing. I re-seated the PSU and then it came on just fine. Now every time my computer tries to resume from sleep I get a BSOD with the error "Bad_Pool_Caller".I have included the files requested in the instructions.
View 8 Replies
View Related
Jul 4, 2012
I don't know what's going on but everytime I try to set my computer to sleep, it doesn't resume anymore instead it restarts automatically.
View 1 Replies
View Related
Sep 16, 2012
About 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard diskThe resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue
View 5 Replies
View Related
Nov 9, 2010
Every time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's.The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knowns nothing about it.The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive.The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.I've gone through every article I could find on the Web from Mr Fix it to the Upper/Lower Filters regedit.
View 4 Replies
View Related
May 18, 2011
It was working fine, I didn't install or change nothing (mostly is used as MediaCenter). It was working perfectly without any change for months. Then I shutdown one day as always, and when I reboot the next day no network is present.The PC is an Acer Aspire X3900 desktop with an integrated intel NIC. This is what I have seen: In the Windows 7 network configuration panel there isn't any NIC present. IPCONFIG shows nothing, no adapter is listed (is not like when you unplug the network cable and the adapter is listed buy without the IPs; now the command shows nothing at all). But, and that is the weird thing, in device manager all seems fine. The Intel NIC is listed without any warning mark. Looking the properties, all looks ok. This is what I had already try: I reinstalled the NIC drivers. No changes. Reinstalled the chipset drivers. No changes. Uninstalled NIC drivers with an Intel utility. Then I rebooted and reinstalled the drivers when windows detected the new hw. No changes. Disabled the NIC adapter in device manager, reboot and re-enable. No changes. Uninstalled the NIC adapter in device manager. Reboot and re-install the drivers when windows detect the new hw.No changes. Disabled the NIC adapter in BIOS. Boot windows, shutdown, re-enable the adapter in BIOS, and reboot. einstall the drivers. No change. Recover the system from an old recover point, but no change.
View 3 Replies
View Related
Feb 6, 2012
My brothers advent modena laptop stopped working and it turned out it was a hard drive issue. I replaced the hard drive and reinstalled windows 7 32bit. I had to download a iso file from [URL] as he wasn't give a installation disc. The install went fine except when it was finished there was no internet connection available. I tried to troubleshoot but couldn't find any network drivers.
View 3 Replies
View Related
Apr 25, 2011
I tried to update avg on hubs laptop so the kids can play and now after I did it we can't get online period!! on the tool bar were the connection pic is says limited connection? So I did all of the steps to fix ect and it finally came up to.
- There might be a problem w/the drivers for the wireless connection2 adapter
- There might be a problem w/the drivers for the local area connection adapter
MY actual modem is good as we have 3 running right now - should I go to restore point before avg in the critical update moments before I realizes this problem?
View 7 Replies
View Related
Oct 12, 2009
I've been using windows 7 32 bit for quite awhile now. But i really want to use the 64 bit windows. However i face the problem that right after my wireless installation, i am unable to get windows to recognise my wireless adapter.
As such i cant install the driver and since i lack the internet, i am unable to run windows driver update, so i cant search for the driver online. any ideas how i can solve this problem other than buying a new wireless adapter? im using a linksys wireless- G, model No: WUSB54G, wireless adapter
View 9 Replies
View Related
Jan 28, 2009
I can't get my Network Adapter to work. I tried installing the drivers included on the CD, but that didn't help much either.
I tried importing them with DriverMax aswell, but that didn't solve the problem either.
How can I get it to work? I'm running 64bit version of 7.
Nevermind, already found the right drivers.
View 5 Replies
View Related
Dec 29, 2009
I recently purchased a Belkin wireless network adapter for my HP windows 7 computer, and the checkout woman said it would work.
Unfortunately, it does not work. at first, it was just dodgy, connecting with only a small connection. It started getting better, but it would always cut out after a while.
A friend of mine tried to fix it, using lots of methods including the xlink kai method and others including downloading the drivers and another one which I can't remember. None have worked.
Has anyone got a really easy, fool-proof, easy understandable way to make this work please?
View 1 Replies
View Related
Oct 2, 2010
Last night my wireless adapter (Atheros AR5007EG Wireless Network Adapter) stopped working. In the properties it says it is working properly, however,it will not find a single wireless network to connect to, only the big red X over the icon in the system tray. My wife's laptop which is 5 feet from mine, finds our network as well as several of our neighbors. I upgraded to Windows 7 last month, so this morning I tried updating drivers, installed these but still the big red X. My laptop will work with the ethernet cable plugged in, just not wireless.I am stumped because it says it is working properly in the properties menu and not returning any errors during troubleshooting. I know its not my router, as my xbox, ipod touch, android phone, and wife's laptop can connect and work fine. Since she and I have the same laptop, I made sure that our properties settings were the same this morning as well, and they match up.
View 9 Replies
View Related
Nov 16, 2011
"Problem with the driver for Wireless Adapter".I have an HP-Pavilion 2009f with Windows 7 home premium 64-bit. All has been fine with my internet connection, except for a few drops here and there, but all in all it has been tolerable. When I went to bed last night it worked, when I woke up, it didn't. When I troubleshoot I get the message, "There might be a problem with the driver for the Wireless Network Connection Adapter", to which Windows cannot fix. I get this same error message, respectively, for both wired and wireless connections. After troubleshooting without success, I decided to try and do system update.I am only connected with "Limited Access".What's even weirder is when I open a cmd window and enter ipconfig /all.
View 2 Replies
View Related
Jan 27, 2012
My new Samsung laptop has just stopped allowing me access to the internet. Its not a problem with the router as I have a wired connection to a desktop that is fine. My laptop has been working ok but now I just get 'Limited Access' from the status bar. All the other checks have been made with ISP the Intel(R) Centrino(R) wireless N130 is supposed to be working according to the network properties dialogue box. Also have wired the ethernet from desktop to laptop and still the same response so narrowing it down to the possible driver software.
View 1 Replies
View Related
