BSOD When Resuming From Sleep. Bad_pool_caller?
May 29, 2012
I got a new monitor (Dell 2007wfp) and hooked it up to via VGA cable. I ordered a usb cable for it, and a DVI cable and then I went out of town for two weeks and completely unplugged all electronics including my computer. When I got back I installed the new cables, plugged everything back in, and the computer wouldn't start. The light on the PSU was flashing. I re-seated the PSU and then it came on just fine. Now every time my computer tries to resume from sleep I get a BSOD with the error "Bad_Pool_Caller".I have included the files requested in the instructions.
View 8 Replies
ADVERTISEMENT
Jan 30, 2012
I have a refurbished Dell XPS 15 laptop from 5 months. Every time i resume my windows from sleep, after a few minutes i got different Blue Screen errors. I've re-installed my OEM windows, once (from recovery Partition) but still the same errors.I've attached my mini-dumps files, with the report and some screenshots.
View 1 Replies
View Related
Mar 2, 2012
For months I had Windows 7 installed and running without any incidents; I was using Microsoft Security Essentials. The other day I installed Win8, decided I hated it, and reformatted/installed Windows 7. This time I tried Avast 7 Free and things looked good for a while until I woke up my PC from Sleep mode then it crashed.
View 5 Replies
View Related
May 16, 2012
I just built a new computer and had it running stable for several days with all hardware except the graphics card and a new monitor. After plugging the new video card, I believe the system remained stable, but am not 100% confident since it only survived overnight. After plugging the new monitor (HP z2740w) and connecting via USB crashes started occurring when resuming from sleep.
I tried uninstalling the graphics drivers and the problem seems to have stopped for now, so I'm reinstalling to see if anything changes.
Windows 7 Pro 64 OEM (System Builder) Everything in the machine is brand new except the hard drives. Installation age is a few days.
View 3 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
View 7 Replies
View Related
Jul 4, 2012
I don't know what's going on but everytime I try to set my computer to sleep, it doesn't resume anymore instead it restarts automatically.
View 1 Replies
View Related
Sep 16, 2012
About 75% of the time, when I lift the lid to resume my laptop from sleep, the laptop will not resume immediately. The screen will remain black, the wifi light stays disabled, and while I can hear the fan, nothing else really happens.Usually after anywhere from 3 to 20 seconds, though, the laptop will eventually wake up, and I believe it tends to be when the hard drive actually starts spinning -- the hard drive light will blink and I'll hear the faint 'click' of the hard diskThe resume used to be more or less instant. I've reformatted since I first noticed this problem, yet I still have it, which makes me think it might be a hardware issue
View 5 Replies
View Related
Nov 9, 2010
Every time my dell laptop is in sleep mode for a while - and there is still plenty of battery left it seems to "resume windows" and it's like a startup. Shouldn't it just ask for my password and be there right away?
View 3 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's.The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knowns nothing about it.The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive.The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.I've gone through every article I could find on the Web from Mr Fix it to the Upper/Lower Filters regedit.
View 4 Replies
View Related
Mar 31, 2012
when i resume my pc from sleep the blue screen appears with some written stuff and my pc restarts. This has worried me alot and i would like to know a way i can fix it. Im using windows 7 64 bit.
View 2 Replies
View Related
Nov 7, 2011
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. Went from Corsair xms3 to G.Skill Ripjaws.
I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy.
I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have case fans that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1.
Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting i'm missing because i'm sure it was working with my last set of ram.
View 2 Replies
View Related
Apr 11, 2012
so today my computer BSOD'd on me with the line: BAD_POOL_CALLERThis happened while I ws trying to connect to wifi, and now my computer won't even see my wireless connection.My computer is about two years oldWindows 7 64bit (the one that came installed.)
View 3 Replies
View Related
Jan 23, 2012
My Windows 7 is:- x64 Home Premium SP1- the original installed OS on the system.- an OEM version. Came pre-installed on system.- The age of system (hardware) is 8 Months.- The age of OS installation is 8 Months.- Never re-installed.Hardware is:Sony VAIO VPC-EB46FXIntel Core i5 CPU M480 @2.67GHz
View 3 Replies
View Related
Dec 15, 2011
My adapter is always gone from resuming from sleep. I know it was working before. Just changed my ram and bios settings from a fresh build. I am having this same issue with my newly built pc. The drive running Windows 7 is from a laptop where the mobo died. I am using it in AHCI mode because my case has a front hot swap caddy. I have a Gigabyte Z68X-UD3H-B3 mobo and after installing and uninstalling drivers, software, changing settings, removing ram, changing power options to maximum power for pci card and wifi, turning off hibernate, restarted, rebooted, updated all drivers from Gigabyte, chipset drivers, etc. I have unchecked "allow Windows to turn off this device". Restarted and tested and I get the same issue. I have unchecked this box in all of my networking devices too including, 802.11n Wireless Lan Card #2 and Microsoft Virtual Wifi Miniport Adapter. Also, uninstalled and reinstalled these and updated drivers from my disc that came from Gigabyte as well as driver update from the Gigabyte website.
Nothing I do will turn on my wifi card after sleep. Windows will not see a network adapter. In device manager, there is no wireless card, even after showing hidden devices. Adding a device does not discover it. Installing the network card driver and software does nothing to detect it. Windows thinks there is no device connected. Everything works fine after restarting though. I have S3 enabled in bios as that is what I want. I have cpu fan that I don't want to hear with no option to turn them off. Otherwise, i'd be fine with S1. Is this just not a working feature? I've read that sleep is an ongoing issue with Windows, but my pc sleeps fine. I just want to be able to put my pc to S3 sleep and resume with a working wifi card. There must be a key setting I'm missing because I'm sure it was working with my last set of ram.
View 7 Replies
View Related
Apr 2, 2012
I have got an HTPC/Server that has a lot of hard drives in it. The OS is run off a SSD and of all the hard drives, the one that really gets used is 1.5TB WD drive for recording of the television.
I have set Windows up so it turns off hard disks off after 20 minutes if they are not being used which is fine, but my problem is that my computer automatically goes into Sleep Mode (S3 hybrid sleep) when it is not recording anything and when it wakes up all the hard drives spin back up.
Is there any way to keep hard drives spun down even when resuming from sleep?
View 5 Replies
View Related
Sep 23, 2012
Windows 7 64-bit
ASUS P7P55D-E LX
Core i5-750
Just the other day, I bought a Samsung 830 SSD and tried to install it yesterday. There were several problems, including the SSD not showing up in disk management and Windows Explorer, but showing up in device manager, and showing up in the BIOS. The biggest problem, however, was learning that my motherboard could not do SATA 6 without halving my PCI-E x16 lane. Anyway, I decided to hold off on the SSD until my next build and I'm sending it back.
The issue now is that I cannot put my computer to sleep. When I do, it resumes within a second or so. I tried unplugging every device from it, including my Ethernet cable and all USB devices, and it still persists. I also changed power management to disallow my network card from waking my computer, and changed the suspend mode of my USB controller to disallow them to wake the computer as well.
While installing the SSD, I recall changing the SATA 6 Marvell controller from IDE to AHCI (two SATA 6 ports are controlled by Marvell (into which I plugged my SSD) and the others by JMicron). As of writing, the Marvell controller is back to IDE and has nothing plugged into it. I also installed a few SATA controller drivers while attempting to get SATA 6 speeds and trying to figure out why my SSD was not showing up in disk management (I could not even format it via a right-click and it had no drive letter).
My suspend mode is set to "Auto" in BIOS, same as it's always been. Perhaps this has nothing to do with my failed installation of the SSD. But it only began after I tried to install it.
View 2 Replies
View Related
Jan 9, 2013
Did a fresh install of Windows 7 Professional and made sure all the Microsoft Updates were installed. But every now and then the laptop shows the BSOD and restarts itself. It seems to happen randomly. I've uploaded the most recent dmp file in hopes that someone can help me figure out what is causing the BSOD. The laptop is a Gateway W350A if it matters any.
So I used Whocrashed to look at the dmp file myself and found that it was the Realtek wireless lan driver causing the BSOD. I went to find an update from the Realtek website which I installed. Now the card won't recognize any hotspots at all. Windows diagnosed the problem as the wireless on the laptop being turned off. I triple checked that the wireless was on, disabled and re-enabled the card and the results were the same. S the latest version of the driver makes the laptop think the wireless is off and the previous version works but causes the BSOD.The version of the driver causing the BSOD is Realtek RTL8187SE 6.1020.226.2009 The most recent version that causes the wireless card to not recognize hotspots is 9109.1028.2009?
View 2 Replies
View Related
May 12, 2011
I had posted another forum post on the games section where I kept getting this bluescreen error when I played WoW. However today the issue occured even when I didn't run the game so I think its just a general problem now.I wiped my entire computer, reupdated all my drivers and reinstalled windows 7 and wow to try to fix the problem, but no luck. I though the problem was my memory at first, so I did several memory diagnosis tests and tried different sticks of RAM (current using 8g) and they all passed and no errors came up on the windows memory diagnosis tests. I also went to the alienware website and re-downloaded all the drivers for my M17 model, and I updated windows about 50 times.I will provide my system specs and my minidump files below for you techy's to take a look:
OS NameMicrosoft Windows 7 Professional
Version6.1.7600 Build 7600
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation
System NameNICK-PC
[code]....
View 1 Replies
View Related
Mar 12, 2012
I run HotSpot Shield because my college has a network security that logs your activity (Sonicwall), and I find it to be a little too invading on my privacy.However, I find that HSS keeps causing BSODs while waking from hibernate (whether I'm running 7 or 8). I don't know if this is due to dual booting or simply because HSS runs a virtual network adapter, but I'd like to get it to work properly.
View 2 Replies
View Related
Jun 10, 2012
I have been working on the problem for 2 days now and have gotten to various stages of working and not working. The issue at its worst will always BSOD when starting windows even using the various options. I have since then used the command prompt option form the install disc to run chkdsk and other repair options (fixmbr sfc /scannow) and am now able to boot into windows most of the time. Oh and sfc /scannow reports corruption but unable to fixI believe it is the work of some sort of malware but i have run updated versions of kaspersky and malwarebytes as well as rkill in an attempt to remove it but all report back that there is no malware. If that is the case then I feel like my drivers have been corrupted somehow and have replaced most of them but still get BSOD's but usually after I try to run a full security scan.
The only lead I have is the log file from sfc /scannow. Oh and most of my issues happened after running driver verifier so thats why I believe it is a corrupted driver and I recently believe that my Diablo 3 account was stolen by a keylogger but yet again using all the different security options that I have since downloaded found nothing including running avg with a linux disk at startup.Anyway Im sure i forgot to add stuff that I did but hopefuly we can figure it out i feel like my only uption is to do a repair install which i think I tried bu didnt work since my install drive is only 64GB and has 6 GB space left.
View 4 Replies
View Related
Jan 25, 2013
System Spec:64 bit- I built the machine August 2010, I have not reinstalled the OS since. Full Retail Version of Windows 7.I have been experiencing problems with this machine since about a month after I built it in August 2011. At first I would get a BSOD just every once in a while. I am at architecture school and I didn't have time to address the issue, so I just kept a diligent written log of every time I noticed it happening. I have included that as an attachment. You'll notice that there was not an obvious trigger - it would not crash as soon as I opened something, or as soon as I tried to use the sound card. It would happen both while I was working in Adobe Illustrator, and when I left my computer idle to go grab a cup of coffee or something like that. I have included all the dump files I have as attachments.Recently, however, Windows has had trouble resuming. I can't figure out exactly what is happening because it hasn't happened while I was at my computer yet. But, pretty much every time I return to my computer after a 10 minute absence, I come back to a black screen with a blinking white underscore in the top left corner. I think it has something to do with the machine going to sleep and having trouble resuming windows.
Another clue, which I've researched a little bit, is that I think I heard a single beep the other day. Granted, I'm in a studio with 50 other people and there are cellphones, headphones tons of computer and all kinds of noise, but I'm sure enough about what I heard to include it here. The forums I checked suggested this was a problem with the RAM.Here is a list of the components from the NewEgg invoice:
[code]...
View 2 Replies
View Related
Apr 22, 2012
My laptop originally came with Vista 64 but a few months ago I installed Windows 7 32 bit (64 would not run for some reason). Since then I've been getting a BSOD pretty consistently when torrenting, or randomly when using either Chrome or IE--Firefox seems to work fine. I suspect the problem might stem from bad/outdated network drivers, how to interpret the dump file?
View 4 Replies
View Related
Jun 21, 2012
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
View 7 Replies
View Related
Oct 26, 2011
Stop:0x000000C2, (0x00000007, 0x00001097, 0x6A1C4783B, 0x8E469D24) ntfs.sys 8E469D24 base at 8E43B000, Got this error 5 times. Is it memory? The Motherboard, or Chip? Also attempted to reload Win 7 again and got the same crash...
View 1 Replies
View Related
Jun 14, 2012
I have a brand new Dell Optiplex 990 where I replaced the existing SSD with an Intel SSD520 and I installed a Creative Soundblaster Audigy 2. Whole system was freshly installed with newest drivers. But now I got this:
==================================================
Dump File : 061412-5959-01.dmp
Crash Time : 14.06.2012 03:20:35
Bug Check String : BAD_POOL_CALLER
Bug Check Code : 0x000000c2
Parameter 1 : 00000000`00000007
Parameter 2 : 00000000`0000109b
[code]...
View 3 Replies
View Related
Feb 8, 2012
bad_pool_caller how to fix with free site
View 3 Replies
View Related
Dec 17, 2011
I have been working on a client computer recieving a BAD_POOL CALLER error. This is a Dell Deminsion 8200, Win XP Home. Unable to provide any other specs as I was unable to get past this BSOD. Tried loading original oem disk, disk loaded to repair, pressed (r) for repair, comes back to BSOD BAD_POOL_CALLER. Also, unbale to use safe mode or any other mode.Tried to reload Win XP with fresh install recieved same error.
View 4 Replies
View Related
Aug 9, 2012
It never happened when I was using the PC. Once in a while after I stop using it and the PC should have gone to sleep , I find the PC off. At re-start, I get the message of the crash.
View 3 Replies
View Related
Jul 8, 2009
when I try to put my PC to a sleep I get BSOD: "driver_irql_not_less_or_equal".
I got Windows 7 x64 build 7100, nVidia Geforce 9500GT.
I haven't installed any new drivers recently, but the problem appeared only yesterday.
The minidump files are attached.
Can anyone help?
View 2 Replies
View Related
Nov 6, 2012
My laptop keeps turning itself off and keeps blue screen..BAD_POOL_CALLER ))..i have attached the last of my minidump .DMP files if you can access then and check the for me ...#DOWS 7 32BITINTEL DUAL CORE T3200 & 2GB X 22GB RAMADVENT
View 2 Replies
View Related
May 11, 2011
About a month ago my pc started going to BSOD while trying to resume after being put to sleep. PC is 16 months old. I read the forums, etc and updated the ATI radeon display driver and the Realtek network driver but the problem persisted.I also rolled back the system using restore to before the problem began but no change. I then reinstalled windows 7 64bit using the OEM CD rom and installed all the MS updates - no change. Last week, it occurred to me that it might be a monitor hw issue so I swapped out the monitor with another I had. That seemed to solve it - for 4 days - now it's doing the same thing with the second monitor.
View 5 Replies
View Related
